Are you still using XP system now?
There are still people or units insisting on using the , and the software used is also developed internally, and the software is only compatible with the XP system. If the computer or system is replaced, big problems may occur.
XP system can be said to be a very classic system. Before Microsoft unilaterally gave up on it, it was the most popular system for most computer users. like. And even in 2014, after Microsoft announced that it would give up the update and maintenance of XP, there are still some people who insist on using the XP system.
However, when individual users give up the XP system, some units are still using XP. People are wondering why they haven't replaced their computers yet, and they insist on using this system that is already several generations behind. Computers and systems? (Recommended study: PHP video tutorial)
In fact, there are many reasons why those units do not change computers. Their replacement of computers is not as simple as just replacing a few or a dozen computers. If they replace computers or systems, big problems may arise if they are not careful. Let’s take a look at the reasons why some units do not replace computers.
Why are some units not replaced?
There are many reasons for this, but in general it can be summed up in one point: a single move affects the whole body. For some units, changing the system is not just a matter of replacing a computer. Take banks as an example. The network they use is an internal network, and the software they use is also developed internally. It is the kind of software that is not updated every few years, and the software is only compatible with the XP system. You said that if you suddenly switch to a computer with win7 system, your work will be affected due to system incompatibility. This would be fine if you were in an ordinary position, but if there is a computer problem in a position that affects the entire work system, then all work links will be paralyzed. Do you think this can be replaced? So if the system really needs to be replaced, then the entire system needs to be replaced, and this will cause other problems. For example, it costs a lot of money to replace all equipment. Although this is not a problem for some units, staff also need an adaptation period when facing the new system. Inevitably, work efficiency will become higher than before. Go slower. However, this is not the most important thing. What to do with the computers that are obsolete after upgrading and upgrading is the biggest problem. You must know that computers that have been eliminated in the workplace have more or less secret files, and it is impossible to handle them casually like ordinary people. After all, there are more and more people who know computer technology now. If someone accidentally restores some important data, it will be a big deal. So because of the above reasons, those units are of course unwilling to replace new computers and new systems. Anyway, everyone is using them well now and there are no problems, so why bother asking for trouble? For more PHP-related technical articles, please visit thePHP Graphic Tutorial column to learn!
The above is the detailed content of Are you still using XP system now?. For more information, please follow other related articles on the PHP Chinese website!

Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

AI Hentai Generator
Generate AI Hentai for free.

Hot Article

Hot Tools

Notepad++7.3.1
Easy-to-use and free code editor

SublimeText3 Chinese version
Chinese version, very easy to use

Zend Studio 13.0.1
Powerful PHP integrated development environment

Dreamweaver CS6
Visual web development tools

SublimeText3 Mac version
God-level code editing software (SublimeText3)

Hot Topics



When I turn on the computer, it always stops at the motherboard logo screen. Nothing happens when I press anything, and I can't enter the bios? This is usually because the BIOS battery voltage is too low, and the system time has returned to the BIOS preset time, such as 2000.1.1, 00:00. You can use it after pressing F1 to enter the bios and set the time. Do not turn off the AC power after shutting down at night. Generally, the system time will not be lost when you turn on the computer the next day, and you can still enter the system normally. If the AC power is cut off, the battery voltage cannot sustain the power consumption of the bios, and the computer will be in the same state again the next day when it is turned on. Replacing the bios battery is the ultimate solution. Win11 is stuck on the motherboard logo interface when booting? 1. It is a problem with bios settings. We only need to find the corresponding setting items.

Can two memory modules be installed in a desktop computer? 1. Two memory modules of different models cannot be installed in the same desktop computer at the same time. Memory modules of the same model with different frequencies can be installed at the same time. The main function of a computer memory stick is to temporarily store the calculation data of the CPU and the data exchanged with external memories such as hard drives. 2. At least 2. According to the current high configuration, it is 8G memory. 2 4G ones. For a motherboard with 4 memory sticks, it is best to install multiple memory sticks of the same brand and speed, and do not mix them. Under the XP system, it does not support more than 4G of memory, so there is no need to go to the trouble of installing that much. 3. A computer can be equipped with two memory modules. After adding memory modules to the computer, the memory capacity will be superimposed. 4. Yes. Most motherboards on the market currently have a memory slot reserved, that is, there is

Why can the mobile phone search for WIFI, but the computer cannot? Please explain the reason why the laptop cannot search for WIFI, but the mobile phone can: the computer is too far away from the router and cannot receive the WIFI signal. This is caused by the inconsistency between the frequency bands emitted by the computer network card and the router. Most routers are dual-band 4G and 5G, and some older computers do not support the 5G band. If the laptop is too far away from the wireless router at home, the laptop cannot find the WIFI signal. It is possible that the wireless router at home is set up with wireless Mac address filtering, but after changing the computer or wireless network card, you will no longer be able to access the Internet, so you need to add a new MAC address to the router settings. System service issues. This is the most easily overlooked problem. Most of the problems of not being able to find a wifi signal are basically

Why can mobile phones connect to wifi and cannot connect to computers? Generally speaking, when encountering the above problems, the computer itself may have three reasons: the wireless network connection is disabled, the Internet Protocol version 4 attribute configuration is incorrect, or the wireless network adapter fails. Wireless network connection is disabled, this can be resolved by re-enabling wireless network connection. The mobile phone can connect to the wifi but cannot connect to the computer. There are two methods: Method: Restart the router. Restart the router, and then use the computer to connect to WIFI again. Method: Turn off the computer firewall settings to eliminate firewall setting problems. Since the mobile phone can connect to WIFI, but the computer cannot, the most likely reason is that the IP settings are incorrect, the IP is not automatically assigned, and it shows that it is restricted or has no connection. First, right-click the local area connection and find the properties.

Where to find the laptop graphics card? The laptop graphics card can be viewed in my "My Computer". After opening My Computer, click Properties and select Display. Click Advanced Options on the display page to see the graphics card information. Enter "dxdiag" in run. If a DirectX Diagnostic Tool dialog box pops up, prompting us if we want to check, click OK. Check the computer configuration information through the DirectX diagnostic tool interface that pops up: a. The red box in the picture below shows the cpu and memory information. Question 2: How to quickly check whether the laptop graphics card is a discrete graphics card? The easiest way: right-click "My Computer" and select "Manage", then select "Device Manager" and open the "Display Card" branch on the right. Here you can

How to set up Windows 7 to automatically start up every morning 1. First open the "Start" menu, click "Control Panel", select "System and Security", and then click "View System Information". In "System Information", select "Settings", in "System Settings", click "Power Management", and then check "Allow the computer to turn on automatically" in "Power Management". 2. BIOS sets scheduled automatic boot. Currently, most motherboards support the BIOS scheduled boot function. First press the power on button of the host, then press the delete button continuously until you enter the BIOS setup interface. Figure 1 Use your keyboard's right arrow key to move to Power Options, then use the down arrow key to move to APM Configuration. 3. Setting the computer to automatically restart can be very useful in some specific situations, such as

Thank you, Little Secretary Wukong, for the invitation! When setting up the BIOS on a Lenovo desktop computer, the USB disk cannot be booted? Generally, if you encounter this problem, please upgrade the BIOS to the latest version first. However, upgrading the BIOS personally is risky, and the motherboard may be scrapped in severe cases. It is more reliable to hire professionals. You can refer to my previous answers for this method tutorial. If you have any questions in this regard in the future, I will answer them in detail. Friends who are interested can pay attention. First, let’s start by setting up the bios to answer the question. 1: When you turn on a Lenovo machine, you usually press F12 to enter the bios. When entering the bios, we use the cursor to move to the Security option, which means security. Then use the arrow keys to move the cursor to the SecurityBoot option, which means safe boot. Then press the keyboard to return

How to set the computer to automatically restart 1. Find the computer on your computer desktop and right-click the mouse. In the pop-up window, we find properties and click. After entering the system properties, we select. 2. You can set it in the task scheduler to set up automatic startup: right-click this computer, select Manage, and enter the page. Expand System Tools, click Task Scheduler, and click Create Basic Task on the right. 3. How to set the computer to automatically restart when a call comes in. First, restart your computer and click Restart with the left button of the mouse. Because the XP system was used for testing, the startup time is very short. Press and hold DEL during startup to enter the BIOS interface. The BIOS interface is shown in the figure below. This is the main BIOS interface. How to set the computer to automatically start after a power outage. First, restart