How to resolve the red triangle that appears on your computer

When the computer is turned on, a red triangle pattern appears, which causes the computer to be turned on and requires pressing F1 to enter. Everything after that is normal. This prompt when booting is the most common phenomenon on ASUS or imitation ASUS motherboards. To solve this situation, just enter the BIOS and change the settings.

Cause:

The floppy disk drive is installed, but the option to turn on the floppy disk drive is set in CMOS.

Method:
1. Press the Del key when turning on the computer, enter the BIOS settings, select the first "Basic Settings", and set the floopy item to "Disabel".
2. Press DEL to enter the BIOS when you first start the computer. Press the Enter key to enter the first item. Check whether the "Drive A" item inside is "None". If not, press "Pgup" or "PgDn" to modify it. , press "ESC" to exit after modification, select the "Save & Exit Setup" item and press Enter to exit the BIOS, restart, if it still doesn't work, replace the battery and follow the above steps to reset.

3. You need to press the F1 key to start the computer. This is mainly because the settings in the BIOS do not match the real hardware data.

Related recommendations: "FAQ"

can be divided into the following situations:
(1) There is actually no floppy drive or the floppy drive is broken, and the BIOS There is a floppy drive set up in it, so you have to press F1 to continue.
(2) Originally, two hard drives were installed and set to dual hard drives in the BIOS. Later, when one of them was removed, but the BIOS settings were forgotten to be changed back, this problem would also occur.
(3) If the mainboard battery is out of power, it will also cause data loss and this fault will occur.
(4) Restart the system, enter the BIOS settings, and find that the floppy drive is set to 1.44M, but there is actually no floppy drive in the chassis. After setting this item to NONE, the fault is eliminated.

The above is the detailed content of How to resolve the red triangle that appears on your computer. For more information, please follow other related articles on the PHP Chinese website!