Unable to save ip settings, please check one or more

1. Use win r on the keyboard to call up the running program, enter: cmd in the running input box, and then use the Enter key!

2. Copy and paste the following code in the pop-up command prompt interface: netsh interface ip set address “Ethernet” static 10.243.1.11 255.255.255.0

PS: There are spaces before and after Ethernet. It is best to copy and paste directly to avoid errors.

3. Then use the Enter key. If the interface shown in the figure below appears, it means failure. If the scan is not displayed, it is successful!

4. Friends who fail can enter the windows menu, right-click the searched command prompt, and then select the "Run as administrator option!

5. Then perform the second step again!

6. After completion, use the left button of the mouse to click on the network Set the flag!

#7. Click in the pop-up network connection interface to enter the "Network Settings" interface!

8. Click to open "Ethernet".

9. Open the "Change Adapter Options" button below the relevant settings!

10. Then use the right mouse button to click the "Ethernet" icon in the "Ethernet" that appears, and select the "Properties" option in the box that appears!

11. Select the ipv4 protocol item shown in the picture below! Double-click it or click the "Properties" button below!

#12. After entering the IP setting interface, you can set the IP in the window!

The above is the detailed content of Unable to save ip settings, please check one or more. For more information, please follow other related articles on the PHP Chinese website!