UEFI GPT installation win7

UEFI GPT installation win7

Whether it is a new desktop or a laptop, the vast majority are uefi motherboards. The corresponding hard disk partition table is gpt. uefi gpt supports the installation of 64-bit systems. For example, win7 64-bit systems can be installed in uefi gpt mode. 64-bit system images are generally larger than 4G. It is recommended to use micrope to install them. Here we will introduce the latest method of installing win7 64-bit system in uefi gpt mode.

1. Preparation work

1. Empty U disk with 8G or larger capacity

2. Make uefi boot disk: how to use micrope toolbox Make a USB boot disk (UEFI&Legacy dual mode, support images larger than 4G)

3. System download: Deepin Technology ghost win7 64-bit one-click installation version V2018.05

4. Gpt win7 activation Tool (non-mbr bootable partition permanent activation tool) v0.9 green version

2. U disk startup settings, enter bios and turn on uefi

3. The steps for installing uefi system image larger than 4g are as follows

1. After making the wepe boot disk, directly install the win7 64-bit system iso image Copy to U disk, supports images larger than 4G;

#2. Insert the wepe boot disk into the computer that needs to install win7 64-bit system, and keep pressing after the new model restarts Start shortcut keys such as F12 or F11 or Esc to bring up the startup menu dialog box, select the recognized U disk option, usually the name of the U disk or the one with the word USB, such as KingstonDT, select the item with UEFI mode, and press Enter key to enter; if it was legacy mode before, refer to the second point to enter the BIOS to turn on uefi mode;

3. Select the uefi windows pe resolution. The first one is selected by default. You can select the second specified resolution and press Enter;

4. After entering pe, you need to install the system under uefi and format the hard disk into a GPT partition table , if it has been a uefi model pre-installed with win10, go to step 7 directly. If you need to repartition the entire disk, double-click [Partition Assistant (lossless)] on the desktop, select disk 1, and click [Quick Partition]. If you There are multiple hard drives, so choose the right one and don’t delete it by mistake;

5. Set the number of partitions, partition size and partition type. System disks with the volume label [System] are recommended. Above 50G, since UEFI boot is selected, the disk type should be selected as GPT. [Partition Alignment] is 4k alignment, 2048 sectors is enough, or 4096 sectors. After confirming that it is correct, click Start Execution;

6. The partitioning process is very fast. After the partitioning is completed, as shown in the figure, the GPT partition will have two ESP and MSR without drive letters. To move these two partitions, you only need to see the partition C, D drive, etc., if the drive letter is occupied by a USB flash drive, select the drive that already occupies the C drive, select [Change Drive Letter] from the list on the left, and so on. If you don’t want to change it, it’s okay. You can change it according to the volume. Mark [System] to determine the location of the system disk;

7. Then open this computer-micro PE toolbox, right-click the win7 64-bit system iso image, and select [Load] , if it is not loaded, right-click - Open with - Explorer;

8. Double-click [Double-click to install system.exe], run the installation tool, and select [Restore Partition], The GHO WIM ISO image path will be automatically extracted to win7.gho, and then select the installation location, usually the C drive, or judge based on the volume label (system) or total size. After selecting, click OK;

9. If this prompt pops up, ignore it, click Yes and continue;

10. This dialog box pops up, select restart and boot after completion Repair, click Yes;

11. Go to this interface and perform the process of installing and deploying the win7 64-bit system to the C drive. You need to wait for a while;

12. After the operation is completed, the computer will automatically restart after 10 seconds;

13. Pull out the U disk in time during the restart process, and then enter this interface to perform win7 64-bit system component installation, driver installation and activation operations;

14. Reboot again to enter the system automatic configuration process, and you need to wait for a while;

15. Finally boot into the win7 desktop, win7 64-bit will Installed.

After completing the above operations, we successfully installed the win7 64-bit system in uefi gpt mode, using the micro-pe boot disk to support image files exceeding 4G.

The above is the detailed content of UEFI GPT installation win7. For more information, please follow other related articles on the PHP Chinese website!