How to remove the computer motherboard

1. First unplug all the lines behind the host, then unscrew the two large screws next to it, and open the back cover of the chassis; (Recommended learning: phpstorm）

2. Remove the memory, forcefully remove the locks at both ends of the memory stick, and pull out the memory stick upwards;

3. Remove the hard drive, unplug the two wires of the hard drive, and unscrew the fixed hard drive.

4. Remove the graphics card, unplug the card lock in the lower right corner, unscrew the screw, and pull it out with force.

5. Remove the CPU, as shown in the picture is the CPU fan. We unscrew the corners that fix the fan, take it off, and you will see our CPU. If you install it back again, you must tighten the fan;

#6. Remove the optical drive, unplug the two wires of the optical drive, and unscrew the screws to remove the optical drive;

7. Remove the power supply, unscrew all the screws fixing the power supply, and a large number of wires Take it out;

##8. Remove the motherboard, which is responsible for the above hardware. We can remove the motherboard from the chassis by unscrewing the screws of this large board.

9. Finally, we assemble the computer according to the above method, cover the chassis cover, and plug in all the wires. The detailed chassis wiring is as shown in the figure:

The above is the detailed content of How to remove the computer motherboard. For more information, please follow other related articles on the PHP Chinese website!