Why does PS restart after a while?

ps Why does it restart after a while?

Generally, the faults that cause the system to restart and shut down irregularly are mainly caused by the following reasons:

1: First, we have to deal with the possibility of right-clicking "My Computer" -->Properties-->Advanced-->Click "Startup and Repair"--> Uncheck the three options in the "System Failure" box below. After unchecking these three options. It can solve most people's problems.

2: If it shuts down automatically and a dialog box appears, it is most likely a virus. Solution: anti-virus.

3: WINDOWS startup program error , If there is an error in the operation of a certain program when WINDOWS is started in the default state, the system will restart and load the new program with the error. If there is a serious error in a program in the startup item, the system will continue to start repeatedly.

Solution: Press F8 when the system starts to enter safe mode, select "Startup and Recovery" in the Control Panel--System--Advanced, and finally change the "Automatic Restart" under the "System Failure" column. Uncheck "Startup".

4: If you use an optical drive or floppy drive, it crashes or restarts. Or, if you attach an extra hard drive, the power will often go off. There may be a problem with the power supply. Solution: Replace the power supply.

5: Nowadays, motherboards generally have temperature protection control chips to prevent the CPU from overheating and burning. Sometimes the CPU warning temperature setting in the BIOS is too low. When the CPU temperature exceeds the warning temperature when the CPU is running at full load, the system will automatically shut down. Of course, due to poor chassis heat dissipation, the CPU temperature is too high and cannot run stably, which will also cause the system to restart.

Solution: Adjust the protection temperature to a more appropriate temperature in the BIOS to enhance system heat dissipation.

Six: Graphics card driver problem. Solution: Download the most stable driver version.

Seven: After using PS to draw pictures for a long time, the file will increase and the memory occupied will also increase. If two The quality and performance of the memory sticks vary greatly or the electrical stability of the memory sticks cannot meet the requirements of dual channels, which may cause the system to run unstable. When running larger programs, it often fails and restarts.

Solution : Try to increase the CL value of the memory in the BIOS, for example, adjust the CL value of the memory from 2.5 to 3. For the channel, you can appropriately lower the bus speed of the system and see. If this method does not work, it is probably necessary to replace the memory.

The above is the detailed content of Why does PS restart after a while?. For more information, please follow other related articles on the PHP Chinese website!