PS tri-fold page making tutorial steps

ps three-fold page making tutorial steps

1. Determine the size of the folding page

Open PS, fill in the size, and add the bleeding position to the size. Add 3MM bleeding space to each side. For example: if the width is 30CM, the actual value is 30.6CM; the height is 20CM, and the actual value is 20.6CM. The unit you need to remember to select is: centimeters.

2. Determine the resolution of the folding page

The printing resolution of the folding page is 300DPI, enter the number: 300, and select the unit: pixel/inch , which is a common resolution for printed output.

3. Determine the color mode of the folding page

The color mode of printing is CMYK, not RGB, so when you first create a new document, you must set the CMYK The mode is selected.

4. Select View in the PS menu bar → Check (√ Ruler)

Use the mouse to click the ruler in the upper left corner and drag it to the 3MM position and release Open the mouse and you will see a blue line. After dragging the ruler on the left and upper sides to the 3MM position, the blue line will show a square area.

5. Drag out the 3MM ruler from the other three corners in turn

This is the printed bleed line. Text and main image content should not exceed this bleed line position. , the part outside the bleed line must be cut off during printing.

6. The fold line position of each piece of three-fold leaf must be fixed. For example: a 30CM wide fold should be made into three folds, each folding 10CM. Therefore, we need to fix the 10CM position. As shown in the picture, the 10CM and 20CM positions are marked with blue lines. When designing text and picture content, we must consider that the fold line position will block it.

The above is the detailed content of PS tri-fold page making tutorial steps. For more information, please follow other related articles on the PHP Chinese website!