insydeh20 setup utility How to set up USB disk startup

insydeh20 setup utility How to set up USB disk startup

1. Quick startup method: Press Fn F12 when booting. If there is a U disk option, you can directly select it and enter it with the words USB HDD

2. If the boot is like this, if it only starts with EFI, you need to enter the setting interface as follows Manual modification

3. Turn on the computer and press FN F2 to enter the bios interface

4. Find Security and select secure Boot option and press Enter

##5. Change Enabled to Disabled

6. Then find Boot, select the Boot Mode option and press Enter

7. Change uefi to Legacy Support

8. Find PXE Boot to LAN (network card startup), change Enabled (Start) to Disabled (Close), then FN F10 to save and re-enter

9. After restarting, press Fn F2 to return to the Boot interface

##10. Find the Legacy option, move the cursor and press Enter to select Put the U disk with the USB HDD prefix and press Fn F6 to top it. After completion, as shown below

11, FN F10 to save and restart to enter the U disk PE, if it is not recognized , press Fn F12

when booting

The above is the detailed content of insydeh20 setup utility How to set up USB disk startup. For more information, please follow other related articles on the PHP Chinese website!