How to set up the startup disk

How to set up the startup disk?

When starting the e68a84e799bee5baa6e997aee7ad9431333234333337 computer, press DEL, enter the BIOS, and then select "ADVANCE SETUP". Then, set first to CD-ROM.

Finally, move the cursor to SAVE.

one. Enter the CMOS Setup main menu. After turning on the computer power, when the BIOS starts to perform POST (Power On Self Test), press the "Del" key to enter the CMOS Setup main menu. In the main menu, you can select different setting options, press the up, down, left and right arrow keys to select, and press the "Enter" key to enter the submenu.

Select the advanced BIOS features (advanced bios features) to enter. The following are 1st Boot Device/2nd Boot Device/3rd Boot Device (first boot device/second boot device/third boot device) Three items allow you to set the boot device startup sequence for the BIOS to load the operating system. The setting value is:

Floppy The system first attempts to boot from the floppy drive

LS120 The system first attempts to boot from the LS120

HDD-0 The system first attempts to boot from the first hard disk

SCSI The system first attempts to boot from SCSI

CDROM The system first attempts to boot from the CD-ROM drive

HDD-1 The system first tries to boot from the second hard drive

HDD-2 The system first tries to boot from the third hard drive

HDD-3 The system first tries to boot from the fourth hard drive

ZIP The system first attempts to boot from ATAPI ZIP

LAN The system first attempts to boot from the network

Disabled Disable this sequence

The above is the detailed content of How to set up the startup disk. For more information, please follow other related articles on the PHP Chinese website!