Home Operation and Maintenance CentOS How to enter the main interface of the system in centos?

How to enter the main interface of the system in centos?

Jul 29, 2020 am 09:53 AM
centos

How to enter the main interface of the system in centos: first set the BIOS to boot from the CD, and select the language and keyboard used during the installation process; then select the installation device, and set the system's host name and network IP, etc.; Then set the disk partition and format; finally the system installation is completed.

How to enter the main interface of the system in centos?

How to enter the main interface of the system in centos:

1. Set the BIOS to boot from the CD, select the second one option to install the desktop environment for the operating system to use.

2. This step is to install the welcome interface, and then select the language and keyboard used during the installation process.

Note: If the language is Chinese, the keyboard will be the default.

3. Choose which device to install on. If there are no special requirements, just choose the basic device.

Note: This step prompts whether to retain the data in the hard disk and pay attention to data security.

4. Next, set the system’s host name, network IP, time zone, and password of the root super user.

5. When it comes to disk partitioning, you must divide it according to your actual situation. If you don’t know why, use the default.

6. Next, format the hard disk partition and start installing the system.

7. After the system installation is completed, you can enter the Centos 6.5 desktop environment.

The important points in computer maintenance are:

1. From the perspective of hardware: appropriate temperature, humidity, dust-proof, moisture-proof, and vibration-proof

1. If possible, it is best to install an air conditioner, which can effectively adjust the temperature and humidity to the appropriate level.

2. When you have time, open the case and use a fan to blow away the dust.

3. The chassis must be placed stably. Computer desks are generally unstable and will vibrate when placed on them. It is best to place the chassis directly on a flat ground, but be careful to prevent moisture and put a thin layer of plastic paper underneath (do not use thick ones to avoid resonance).

4. Avoid not using the computer for a long period of time, as computer components are most likely to wear out over time. It is wise to run the computer every half month.

2. In terms of software: genuine operating system, frequent patching, anti-virus software, firewall, and regular cleaning of junk files.

Related tutorial recommendations: centos tutorial

The above is the detailed content of How to enter the main interface of the system in centos?. For more information, please follow other related articles on the PHP Chinese website!

Statement of this Website
The content of this article is voluntarily contributed by netizens, and the copyright belongs to the original author. This site does not assume corresponding legal responsibility. If you find any content suspected of plagiarism or infringement, please contact admin@php.cn

Hot AI Tools

Undresser.AI Undress

Undresser.AI Undress

AI-powered app for creating realistic nude photos

AI Clothes Remover

AI Clothes Remover

Online AI tool for removing clothes from photos.

Undress AI Tool

Undress AI Tool

Undress images for free

Clothoff.io

Clothoff.io

AI clothes remover

AI Hentai Generator

AI Hentai Generator

Generate AI Hentai for free.

Hot Article

R.E.P.O. Energy Crystals Explained and What They Do (Yellow Crystal)
2 weeks ago By 尊渡假赌尊渡假赌尊渡假赌
Repo: How To Revive Teammates
1 months ago By 尊渡假赌尊渡假赌尊渡假赌
Hello Kitty Island Adventure: How To Get Giant Seeds
4 weeks ago By 尊渡假赌尊渡假赌尊渡假赌

Hot Tools

Notepad++7.3.1

Notepad++7.3.1

Easy-to-use and free code editor

SublimeText3 Chinese version

SublimeText3 Chinese version

Chinese version, very easy to use

Zend Studio 13.0.1

Zend Studio 13.0.1

Powerful PHP integrated development environment

Dreamweaver CS6

Dreamweaver CS6

Visual web development tools

SublimeText3 Mac version

SublimeText3 Mac version

God-level code editing software (SublimeText3)

How to input Chinese in centos How to input Chinese in centos Apr 07, 2024 pm 08:21 PM

Methods for using Chinese input in CentOS include: using the fcitx input method: install and enable fcitx, set shortcut keys, press the shortcut keys to switch input methods, and input pinyin to generate candidate words. Use iBus input method: Install and enable iBus, set shortcut keys, press the shortcut keys to switch input methods, and input pinyin to generate candidate words.

How to read USB disk files in centos7 How to read USB disk files in centos7 Apr 07, 2024 pm 08:18 PM

To read U disk files in CentOS 7, you need to first connect the U disk and confirm its device name. Then, use the following steps to read the file: Mount the USB flash drive: mount /dev/sdb1 /media/sdb1 (replace "/dev/sdb1" with the actual device name) Browse the USB flash drive file: ls /media/sdb1; cd /media /sdb1/directory; cat file name

How to enter root permissions in centos7 How to enter root permissions in centos7 Apr 02, 2024 pm 08:57 PM

There are two ways to enter the root authority of CentOS 7: use the sudo command: enter sudo su - in the terminal and enter the current user password. Log in directly as the root user: Select "Other" on the login screen, enter "root" and the root password. Note: Operate carefully with root privileges, perform tasks with sudo privileges, and change the root password regularly.

What to do if you forget your password to log in to centos What to do if you forget your password to log in to centos Apr 07, 2024 pm 07:33 PM

Solutions for forgotten CentOS passwords include: Single-user mode: Enter single-user mode and reset the password using passwd root. Rescue Mode: Boot from CentOS Live CD/USB, mount root partition and reset password. Remote access: Use SSH to connect remotely and reset the password with sudo passwd root.

SCP usage tips-recursively exclude files SCP usage tips-recursively exclude files Apr 22, 2024 am 09:04 AM

One can use the scp command to securely copy files between network hosts. It uses ssh for data transfer and authentication. Typical syntax is: scpfile1user@host:/path/to/dest/scp -r/path/to/source/user@host:/path/to/dest/scp exclude files I don't think you can when using scp command Filter or exclude files. However, there is a good workaround to exclude the file and copy it securely using ssh. This page explains how to filter or exclude files when copying directories recursively using scp. How to use rsync command to exclude files The syntax is: rsyncav-essh-

What should I do if I forget my centos username and password? What should I do if I forget my centos username and password? Apr 02, 2024 pm 08:54 PM

After forgetting your CentOS username and password, there are two ways to restore access: Reset the root password: Restart the server, edit the kernel command line in the GRUB menu, add "rw init=/sysroot/bin/sh" and press Ctrl+x ;Mount the root file system and reset the password in single-user mode. Use rescue mode: Start the server from the CentOS installation ISO image, select rescue mode; mount the root file system, copy the chroot environment from the ISO image, reset the password, exit the chroot environment and restart the server.

How to enable root permissions in centos7 How to enable root permissions in centos7 Apr 07, 2024 pm 08:03 PM

CentOS 7 disables root permissions by default. You can enable it by following the following steps: Temporarily enable it: Enter "su root" on the terminal and enter the root password. Permanently enabled: Edit "/etc/ssh/sshd_config", change "PermitRootLogin no" to "yes", and restart the SSH service.

What should I do if I forget my centos7 password? What should I do if I forget my centos7 password? Apr 02, 2024 pm 08:51 PM

Three solutions for forgotten passwords in CentOS 7: Single-user mode: Restart the system, edit the kernel options, change ro to rw init=/sysroot/bin/sh, and use the passwd command to reset the root password. Rescue mode: Boot from the installation media, select rescue mode, mount the root file system, chroot to the root file system, and use the passwd command to reset the root password. Grub2 command line: Restart the system, press c to enter the command line, load the kernel, mount the root file system, chroot to the root file system, and use the passwd command to reset the root password.

See all articles