What is the difference between hard disk IDE mode and ahci mode?
Differences: 1. The ahci mode supports hot swapping, but the ide mode does not; 2. The operating range is different, the ahci mode operates the serial ATA (SATA) host bus adapter, and the ide mode operates the parallel ATA drive; 3. The ahci mode supports NCQ technology, but the ide mode does not.
As SSD solid state drives gradually become mainstream, the use of AHCI mode becomes more widespread, and the IDE mode is gradually eliminated. So what is the difference between ide mode and ahci mode? The following article will introduce it to you.
IDE mode
IDE (Integrated Device Electronics), integrated device circuit, is generally used as the interface of ATA hardware. Its original intention is to refer to the "hard disk controller" A hard drive integrated into the "platter". IDE mode can simulate SATA disk mapping into an ordinary IDE hard disk without loading additional SATA drivers. But it does not support any new features of the SATA interface.
IDE mode belongs to the parallel port transmission mode, that is, ATA mode. It was widely used before 2004. The theoretical maximum data transmission speed is 133mb per second. AHCI mode is a new technology and belongs to the serial port transmission mode, which is In SATA mode, the transfer speed is also very fast, theoretically reaching 300MB per second.
Although the IDE mode will be eliminated in the information technology innovation, it is still used in the system. For example, in order to install a system that does not inherit the SATA driver, it needs to be adjusted to the IDE mode. After the driver is installed, it is necessary to adjust AHCI back, otherwise the system performance can only reach about 30%.
AHCI mode
AHCI (Serial ATA Advanced Host Controller Interface, Serial ATA Advanced Host Controller Interface/Advanced Host Controller Interface) is under the guidance of Intel , an interface standard jointly developed by multiple companies that allows storage drivers to enable advanced Serial ATA features such as native command queuing and hot-plugging.
Its R&D team members mainly include well-known companies such as Intel, AMD, Dell, Marvell, Maxtor, Microsoft, Red Hat, Seagate and Storage Gear.
Advantages: 1. ACHI supports NCQ technology; 2. Faster reading and writing speeds; 3. Supports hot swapping.
The difference between ide mode and ahci mode
What is the difference between AHCI mode and IDE mode? Please refer to the following list:
AHCI
Definition: Advanced Host Controller Interface
-
Advantages: Supports new technologies such as native command queues
Hot plugging (adding/removing components while the computer is running): Supported
Disadvantages: Not always compatible
Founder: Intel
Operating scope: Operating Serial ATA (SATA) host bus adapter
Operating mode: Traditional Parallel ATA emulation, standard AHCI or vendor-specific RAID
Operating system support: Windows Vista, 7 and 8; Linux, OpenBSD, NetBSD, FreeBSD, OS Z, eComStation and Solaris 10
IDE
Definition: IDE: Integrated Drive Electronics/PATA: Parallel Advanced Technology Attachment
-
Advantages: Maximum compatibility
Hot plugging (adding/removing components while the computer is running): Not supported
Disadvantages: Lack of support for new technologies such as native command queuing and hot-swappable hard drives
Originator: Western Digital
Operation Scope: Operation Parallel ATA Drive
Running mode: IDE
Operating system support: All
Actually AHCI mode, It is a new type of hard disk algorithm that can improve the performance of mechanical hard disks and make the system run faster. What is more advanced than IDE is that it can provide and support more functions.
These new features are the most critical reason for improving performance, such as NCQ technology, which is also a brand-new technology. If you turn it on, it will increase the jump speed between programs. If you want to use this Technology, you need to select the AHCI mode from the hard disk, and then install the corresponding driver in the options.
If the AHCI driver is not installed in the system, a blue screen will appear on the system after it is turned on. At this time, you still need to switch to IDE mode, manually install the AHCI driver, and restart the system after modifying the registry.
The above is the detailed content of What is the difference between hard disk IDE mode and ahci mode?. For more information, please follow other related articles on the PHP Chinese website!
Hot AI Tools
Undresser.AI Undress
AI-powered app for creating realistic nude photos
AI Clothes Remover
Online AI tool for removing clothes from photos.
Undress AI Tool
Undress images for free
Clothoff.io
AI clothes remover
AI Hentai Generator
Generate AI Hentai for free.
Hot Article
Hot Tools
Notepad++7.3.1
Easy-to-use and free code editor
SublimeText3 Chinese version
Chinese version, very easy to use
Zend Studio 13.0.1
Powerful PHP integrated development environment
Dreamweaver CS6
Visual web development tools
SublimeText3 Mac version
God-level code editing software (SublimeText3)
Hot Topics
1378
52
How many digits is the hard drive serial number? How to query the Win11 hard drive serial number
Feb 29, 2024 pm 09:04 PM
The hard disk serial number can be checked through the hard disk packaging box or the hard disk casing, or in the Win11 system. However, some users do not know the method. This article is a method for querying the Win11 hard disk serial number brought to you by this site. What is the number of digits in a hard drive serial number? A computer hard drive serial number is a unique identifier that identifies a specific hard drive. It is provided by the hard drive manufacturer and cannot be modified by the user. The hard disk serial number usually contains 10 to 20 digits and letters, and of course generally consists of 12 digits. It can be used to record hard disk parameters such as hard disk capacity, loading mode, and read and write speeds. In computer systems, hard drive serial numbers are usually used to identify and distinguish different hard drives, and in some cases are used for password protection, software authorization, etc. pass
VBOX_E_OBJECT_NOT_FOUND(0x80bb0001)VirtualBox error
Mar 24, 2024 am 09:51 AM
When trying to open a disk image in VirtualBox, you may encounter an error indicating that the hard drive cannot be registered. This usually happens when the VM disk image file you are trying to open has the same UUID as another virtual disk image file. In this case, VirtualBox displays error code VBOX_E_OBJECT_NOT_FOUND(0x80bb0001). If you encounter this error, don’t worry, there are some solutions you can try. First, you can try using VirtualBox's command line tools to change the UUID of the disk image file, which will avoid conflicts. You can run the command `VBoxManageinternal
How to force hard disk format under Linux system
Feb 25, 2024 am 08:39 AM
How to force format a hard drive in Linux When using a Linux system, sometimes we need to format the hard drive in order to repartition or clear the data in the hard drive. This article will introduce how to force format a hard disk in a Linux system and provide specific code examples. 1. Check the hard disk device First, we need to check the hard disk device information to determine the hard disk device to be formatted. You can view it with the following command: #fdisk-l This command will list all hard disk devices in the system
What is the read and write speed of a 5400 rpm hard drive?
Mar 13, 2023 pm 05:13 PM
The read and write speed of a 5400 rpm hard disk is generally 100MB-150MB per second; but the actual situation may be different. There are many factors that affect the hard disk speed. For example, AHCI mode is faster than IDE mode, and transferring a single file is faster than transferring multiple files. , SATA3 interface is better than SATA2 interface and so on.
Tutorial on adding a new hard drive in win11
Jan 05, 2024 am 09:39 AM
When buying a computer, we may not necessarily choose a large hard drive. At this time, if we want to add a new hard drive to win11, we can first install the new hard drive we purchased, and then add partitions to the computer. Tutorial on adding a new hard drive in win11: 1. First, we disassemble the host and find the slot of the hard drive. 2. After finding it, we first connect the "data cable", which usually has a fool-proof design. If it cannot be inserted, just reverse the direction. 3. Then insert the new hard drive into the hard drive slot. 4. After inserting, connect the other end of the data cable to the computer's motherboard. 5. After the installation is completed, you can put it back into the host and turn it on. 6. After booting, we right-click "This Computer" and open "Computer Management" 7. After opening, click "Disk Management" in the lower left corner 8. Then on the right you can
How to cancel Linux hard drive formatting
Feb 19, 2024 pm 12:18 PM
How to cancel the formatting of a Linux hard disk and code examples Introduction: When using the Linux operating system, sometimes we need to cancel the formatting operation of the hard disk. This article will tell you how to unformat a Linux hard drive and provide specific code examples. 1. What is hard disk formatting? Hard disk formatting refers to the operation of organizing and managing the data on the hard disk in a specific format. In Linux systems, we usually use file systems to format hard drives. Common file systems include ext4, NTFS, etc. two,
How to change the hard disk icon in win7 system
Jul 07, 2023 pm 11:43 PM
Have you seen enough hard disk partition icons in Windows 7 system? Today we will try to DIY a hard disk icon that you like. The following are detailed steps, I hope it will be helpful to everyone. First, you need to prepare a hard drive or your favorite icon file. The ico format icon is used here. 1. Open the disk you want to modify the hard disk partition icon, and then put the ico file into the root directory. I modify the D drive here. 2. Right-click in the root directory of drive D, create a blank text named autorun, and change its extension txt to inf. 3. Open the file, enter the following content and save: [autorun]icon=favicon.ico. 4. After restarting the computer normally, the D drive
4K alignment when using DiskGenius tool for hard disk partitioning
Jan 01, 2024 pm 02:37 PM
4K alignment is a very important parameter in hard drives, but generally new hard drives do not have partitions and alignment. Today I will teach you how to use the DiskGenius partition tool to align 4K. It is recommended to choose mbr as the partition type, because this installation system is easier. Then select 3 partitions and let’s take a look at the specific operation process. Detailed steps for 4K alignment of the hard drive using the DiskGenius partition tool: 1. Insert the solid state drive into another computer, open the software in Figure 1, you can download it if it is not available, and then click on your solid state drive. It's just the gray one. New hard drives are gray and have no partitions. Then click on this quick partition. 2. It is recommended to choose mbr as the partition type, because it is easier to install the system. Then select