What is the router used for in the LAN?
The router in the local area network is used to select the network path; the router is a hardware device that connects two or more networks. It acts as a gateway between the networks. It reads the address in each data packet and then decides how to Dedicated intelligent network equipment for transmission.
#The operating environment of this article: Windows 7 system, Dell G3 computer.
The function of the router in the LAN is network access selection.
A router is a hardware device that connects two or more networks. It acts as a gateway between networks. It is a dedicated intelligent network device that reads the address in each data packet and then decides how to transmit it. It can understand different protocols, such as the Ethernet protocol used by a local area network and the TCP/IP protocol used by the Internet.
In this way, the router can analyze the destination addresses of data packets from various types of networks, convert the addresses of non-TCP/IP networks into TCP/IP addresses, or vice versa; and then based on the selected routing algorithm Send each data packet to the designated location according to the best route. So the router can connect non-TCP/IP networks to the Internet.
The function of a router is to transmit data between different subnets. The specific functions are as follows:
(1) Realize the interconnection of IP, TCP, UDP, ICMP and other networks.
(2) Process the data. It can send and receive data packets and has various functions such as packet filtering, multiplexing, encryption, compression and protection wall of data.
(3) Select the next transmission destination of the data packet based on the information in the routing table.
(4) Exchange topology information between the external gateway protocol and other autonomous domains.
(5) Implement network management and system support functions.
Related expansion introduction:
A local area network is naturally a regional network formed in a local area. Its characteristic is that the distribution area is limited, which can be large or small, as large as a building and adjacent buildings. The connection between them can be as small as the connection between offices. Compared with other networks, the LAN itself has faster transmission speed, more stable performance, simple framework, and closed nature, which is why many organizations choose it. The local area network itself is generally composed of computer equipment, network connection equipment, and network transmission media. Computer equipment includes servers and workstations, and network connection equipment includes network cards, hubs, and switches. Network transmission media is simply Network cable is composed of three major components: coaxial cable, twisted pair and optical cable.
A LAN is a private network, typically within or near a building, such as a home, office, or factory. Local area networks are widely used to connect personal computers and consumer electronic devices, allowing them to share resources and exchange information. When LANs are used in companies, they are called enterprise networks.
A local area network connects various computers, external devices and databases in a certain area to form a computer communication network, and connects to local area networks or databases in other places through dedicated data lines to form a larger information processing system. LAN connects network servers, network workstations, printers and other network interconnection devices through network transmission media to achieve system management files, share application software, office equipment, send work schedules and other communication services. The LAN is a closed network, which can prevent information leakage and external network virus attacks to a certain extent, and has high security. However, once an incident such as a hacker attack occurs, it is very likely to cause the entire LAN to be paralyzed, and all work within the network will be unable to do so. Conduct or even leak a large number of company secrets, causing serious damage to the company's business development. In 2017, the country promulgated the "Cybersecurity Law of the People's Republic of China", which officially came into effect on June 1. It clearly stipulates network security and information security from a legal perspective, and puts forward corresponding requirements for network operators and users. Improve the security of network use.
(Related knowledge sharing: windows)
The above is the detailed content of What is the router used for in the LAN?. For more information, please follow other related articles on the PHP Chinese website!

Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

AI Hentai Generator
Generate AI Hentai for free.

Hot Article

Hot Tools

Notepad++7.3.1
Easy-to-use and free code editor

SublimeText3 Chinese version
Chinese version, very easy to use

Zend Studio 13.0.1
Powerful PHP integrated development environment

Dreamweaver CS6
Visual web development tools

SublimeText3 Mac version
God-level code editing software (SublimeText3)

Hot Topics

People who configure routers often use the default IP address of the router as the gateway. Changing it to another IP address is both confusing and troublesome. Don’t believe it yet, people who often do network maintenance set IP addresses, and input “192.168” very smoothly. But this is not the root cause.

Can. However, you need to pay attention to some issues: 1. Placing the router upside down may have a certain impact on heat dissipation, causing heat to accumulate at the bottom of the router, affecting the heat dissipation effect. Long-term overheating may reduce the performance of the router and adversely affect its lifespan. ; 2. Placing the router upside down may affect the operation and management of the device, and the indicator lights and interfaces may be blocked or inconvenient to operate; 3. Placing the router upside down may also have a certain impact on network security, and the default user name and password may cause This information is more susceptible to prying eyes.

The first light is on, indicating that the router is powered on. Which port is plugged in, the light of which port is on, and flashing means data is being transmitted. Wireless routers usually have three indicator lights: SYS, LAN and WAN. When the wireless router is powered on, the SYS light will light up. When the wireless router is connected to the network modem, the WAN light will light up. The LAN light corresponds to each interface of the wireless router. As long as the network cable is inserted into the corresponding interface, the corresponding LAN light will light up. 1. If it keeps flashing, it means it is transmitted by data, and the router settings should be normal. 2. If you have always been able to access the Internet, but you can't get online recently; it is probably a problem with the external line, that is, a problem with the operator (usually there is a problem with the line, causing the data signal to attenuate too much, although the line is good)

Reasons why the router is connected but cannot access the Internet: 1. Internet service provider problem; 2. Router setting problem; 3. LAN problem; 4. WiFi signal problem; 5. Router hardware problem; 6. DNS problem; 7. Network cache problem ; 8. Firewall and security software issues; 9. Operator restrictions; 10. Equipment failure. Detailed introduction: 1. Internet service provider problems. This is a common reason. Internet service providers may have problems, such as network interruption or service interruption; 2. Router setting problems, etc.

Students who know computers all know that if our computer wants to connect to the network, it must have an IP address. This IP address can be manually configured, such as 172.16.19.20; it can also be automatically obtained by the DHCP server of the computer network card, such as 192.168.1.100 etc. These IP addresses are what we often call IPV4 addresses, and the corresponding IPV6 is also a type of IP address. What is IPV6 IPV6 is a new IP address that emerged in response to the exhaustion of IPV4 address resources. Its full name is "Internet Protocol Version 6", and its Chinese name is the sixth generation of Internet Protocol. The number of IPv6 addresses is theoretically 2^128

The impact of turning off dhcp on the router: 1. The client cannot automatically obtain an IP address; 2. The IP address needs to be configured manually; 3. It may cause network connection problems; 4. It affects the communication of network devices; 5. IP address conflicts; 6. Unable to proceed Dynamic address allocation; 7. Network isolation cannot be performed; 8. Traffic control cannot be performed; 9. Access control cannot be performed. It is recommended that before turning off the DHCP service, carefully consider whether it really needs to be turned off, or keep the DHCP service to ensure that the client can automatically obtain the correct IP address.

EasyTier is an open source, free, decentralized intranet penetration remote networking tool. It is an easy-to-use and feature-rich remote networking solution, suitable for remote office collaboration, game connection and other scenarios. The following is a brief introduction to how to use EasyTier remote networking. Download the easytier-gui program and install it. Download address: https://github.com/EasyTier/EasyTier Just set it up as shown above on the computer that needs to be networked. Virtual IPv4 address: required. For example, computer A is 10.10.10.1, B is 10.10.10.2, and C is 10.10.10.3. It cannot be repeated. (Such IP segments are available: 10.

How to solve the problem that other computers in the LAN cannot be found in the Win11 network? The method is very simple. Users can go to Change Advanced Sharing Settings under Network and Internet Settings under the Control Panel, and then select Start Network Discovery to perform the operation. Let this site carefully introduce to users the solution to the problem that other computers on the LAN cannot be found in the Win11 network. Solution to the problem that other computers on the LAN cannot be found in the Win11 network 1. First, we open the control panel. 2. Then enter the network and internet settings. 3. Then open the Network and Sharing Center. 6. There is also a check mark in the guest options below to enable network discovery. It should be noted that both sides of the LAN must be turned on. If one side