What is the original protocol of wireless LAN
The original protocol of wireless LAN is "IEEE802.11"; "IEEE 802.11" is the common standard for wireless LAN today. It is the standard for wireless network communication defined by the Institute of Electrical and Electronics Engineers "IEEE".
#The operating environment of this article: Windows 7 system, Dell G3 computer.
What is the original protocol of wireless LAN?
The original protocol of wireless LAN is "IEEE802.11".
Since World War II, wireless communications have received attention due to their military applications. Wireless communications have been developing, but they lack a wide range of communication standards. As a result, IEEE formulated the first version of the standard for wireless LAN in 1997 - IEEE 802.11. The media access control layer (MAC layer) and physical layer are defined. The physical layer defines two spread spectrum modulation methods and an infrared transmission method operating on the 2.4GHz ISM frequency band. The total data transmission rate is designed to be 2Mbit/s.
Two devices can build a temporary network by themselves, or they can communicate under the coordination of a base station (Base Station, BS) or access point (Access Point, AP). In order to obtain good communication quality in different communication environments, the CSMA/CA (Carrier Sense Multiple Access/Collision Avoidance) hardware communication method is adopted.
Two supplementary versions were added in 1999: 802.11a defines a physical layer with a data transmission rate of up to 54Mbit/s in the 5GHz ISM band, and 802.11b defines a ISM band in the 2.4GHz band But the data transfer rate is up to 11Mbit/s physical layer. The 2.4GHz ISM frequency band is used by most countries in the world, so 802.11b is the most widely used. Apple named the 802.11 standard it developed AirPort. In 1999, the industry established the Wi-Fi Alliance, dedicated to solving the production and equipment compatibility issues of products that match the 802.11 standard.
If you want to read more related articles, please visit PHP Chinese website! !
The above is the detailed content of What is the original protocol of wireless LAN. For more information, please follow other related articles on the PHP Chinese website!
Hot AI Tools
Undresser.AI Undress
AI-powered app for creating realistic nude photos
AI Clothes Remover
Online AI tool for removing clothes from photos.
Undress AI Tool
Undress images for free
Clothoff.io
AI clothes remover
AI Hentai Generator
Generate AI Hentai for free.
Hot Article
Hot Tools
Notepad++7.3.1
Easy-to-use and free code editor
SublimeText3 Chinese version
Chinese version, very easy to use
Zend Studio 13.0.1
Powerful PHP integrated development environment
Dreamweaver CS6
Visual web development tools
SublimeText3 Mac version
God-level code editing software (SublimeText3)
Hot Topics
1382
52
Which protocol does vivo fast charging belong to?
Sep 06, 2022 pm 02:43 PM
There are two main protocols for vivo fast charging: 1. "QC 2.0" fast charging protocol. "QC2.0" is "Quick Charge 2.0" technology. It is version 2.0 of fast charging technology released by Qualcomm. It can output 5V, 9V, and 12V. , 20V four voltage groups; 2. PD fast charging protocol is a fast charging specification formulated by the "USB-IF" organization. It is one of the current mainstream fast charging protocols and can make the current default maximum power "5V/2A" The "type-c" interface is increased to 100W.
What is the maximum watt of PD3.0 fast charging protocol?
Nov 08, 2022 pm 04:04 PM
The PD3.0 fast charging protocol supports up to “100W”. In November 2015, USB PD fast charging ushered in a major version update, entering the USB PD3.0 fast charging era; the PD3.0 protocol supports 5V3A, 9V3A, 12V3A, 15V3A, 20V5A output, and the maximum power can reach 100W. Not only can It can be used to charge mobile phones, and can also be used to power laptops or monitors.
What are the 5 industrial communication protocols?
Sep 28, 2022 am 11:52 AM
5 types of industrial communication protocols: 1. Modbus protocol, which is a universal language used in electronic controllers; 2. RS-232 protocol, which is a serial physical interface standard; 3. RS-485 protocol, which is based on RS232 Developed on the basis of; 4. HART protocol is a communication protocol used between on-site intelligent instruments and control room equipment; 5. MPI protocol is a cross-language communication protocol used to write parallel computers.
What do ipad wireless lan and cellular network mean?
Nov 17, 2022 pm 04:51 PM
Wireless LAN refers to the application of wireless communication technology to interconnect computer devices to form a network system that can communicate with each other and realize resource sharing; simply put, wireless LAN is "Wi-Fi", which connects to the Internet through a wireless router. Cellular network, also known as mobile network, is a mobile communication hardware architecture. It is named because the signal coverage of each communication base station that forms the network coverage is hexagonal, making the entire network resemble a honeycomb.
SOAP Protocol Guide in PHP
May 20, 2023 pm 07:10 PM
With the continuous development of Internet technology, more and more enterprise-level applications need to provide interfaces to other applications to realize the interaction of data and business. In this case, we need a reliable protocol to transmit data and ensure data integrity and security. SOAP (Simple Object Access Protocol) is an XML-based protocol that can be used to implement communication between applications in a Web environment. As a popular web programming language, PHP
What is the qc4+ fast charging protocol?
Aug 18, 2022 pm 03:49 PM
The QC4+ fast charging protocol is a combination of the USB PD PPS protocol and the QC3.0/2.0 fast charging protocol. It is a multi-functional, multi-protocol fast charging technology. The QC4+ charging protocol is compatible with USB PD3.0 (PPS) and is downwardly compatible with USB PD2.0, QC3.0, QC2.0, BC1.2 and other protocols. The first prerequisite for supporting USB PD and QC4+ is the support of USB-C interfaces at both ends and the power negotiation message based on the CC (configuration channel) in the USB-C interface.
Windows will retire TLS 1.0 and TLS 1.1 in the near future
Aug 12, 2023 am 11:37 AM
Microsoft plans to disable Transport Layer Security (TLS) protocol versions 1.0 and 1.1 in Windows. The company announced the news on its technology community website on March 1, 2023. These two protocols date back to 1999 (TLS1.0) and 2006 (TLS1.1) and have since been surpassed by newer versions TLS1.2 and TLS1.3. Microsoft noted that security issues were discovered in older protocol versions, and "Internet standards and regulators have deprecated or disallowed TLS versions 1.0 and 1.1 in response. Over the years, usage of TLS 1.0 and 1.1 has declined significantly. , Microsoft believes the time has come to disable both protocols. Mic
What technology does the x.25 protocol use?
Jul 18, 2022 pm 04:05 PM
The "x.25" protocol uses packet switching technology; the "x.25" protocol is a computer-oriented data communication network, consisting of basic equipment such as transmission lines, packet switches, remote concentrators and packet terminals, and adopts a layered architecture , negotiation, control and information transmission of information exchange are carried out between the peer layers of the interface through the communication protocol between the peer layers.