Introduction:
In fact, K-way merge sort is still very useful. The simplest one is assuming you want to sort massive amounts of data, such as TB-level data ( Let’s say it’s TB-level search keywords), but our memory is only GB level. We can’t load all the data at once and sort it, but we do want the results in the end, so what should we do? K-way merge sorting makes its debut. In fact, this is a "divide and conquer" idea. Since we want to sort Q numbers, but we can't sort them all at once. At this time, we divide Q into k groups, each group is n. Number, (kAnalysis:
(1) How to merge k sorted arrays?
Because we have discussed heaps before, obviously the sorting efficiency of heaps is very high, so we naturally consider using heaps to implement it. Because we need to sort in ascending order, we create a minimum heap. Because the numbers in the final sorting result are always smaller in the front and larger in the back, we consider putting the first elements (minimum numbers) of all n arrays into the minimum heap, so the size of the minimum heap is k . In this way, we adjust the heap structure, then its first element is min(min(array1),min(array2)....min(arrayn)), which is obviously the smallest element among all numbers.
(2) Because any array is arranged in ascending order, once we delete a minimum element from the heap, we must find an element to fill the hole. To do this, we need to find the next element in the array where the deleted element is and then fill it into the heap. (This is a bit like recruiting the most elite soldiers in the country to fight in an elite regiment. Then the strongest from each regiment will be recruited. If this person unfortunately dies in battle, then find the one who is second only to him from the same regiment. Continue to support this elite group, so as to always maintain the highest combat effectiveness of the elite group) So, how to find the array where the deleted heap element is located based on the deleted heap element? This requires us to create a new composite type, which includes both the current value and the id of the array where the current value is located,
(3) Because each sorted array, with the smallest element The number of values that have not yet participated in sorting is gradually decreasing, so we must maintain an array of length k. This array retains the current position of each array that has not yet participated in sorting. And once the smallest remaining element in the array is added to the heap, the current position must be moved backward.
(4) As the current position of each array moves backward, it will eventually reach the end of the array. At this time, the array can no longer provide any numbers. (This is normal, such as in the army. There is a sharp knife company, which contains the most outstanding people, so when the elite group is finally selected, it will always be selected from this company, and then this company will definitely have no one in the end), so we cannot find it from the array where the currently deleted number is. The next value is reached. At this time, we must select the next array id with value and select its minimum value. The method is arrayIdForDeletedData = (arrayIdForDeletedData 1) % k.
(5) In the end, all array positions always reach the end, that is, all arrays cannot provide values that are not involved in sorting, so at this time we have to determine whether the current heap is empty. If not, Empty, then they contain the largest numbers in n*k. We deleteMin() in order to output the largest numbers in the smallest order. If the current heap is already empty, jump out of the loop directly.
So the final time complexity is only O(n*logk)
Code:
After thinking clearly about the above key technical details, the code here is easy to write.
First, we define a value object, which encapsulates an integer and which array the integer comes from.
package com.charles.algo.kwaymerge;
/**
*
* 这个对象表明是一个可以跟踪来自于哪个数组的数据对象
* @author charles.wang
*
*/
public class TrackableData {
//data表明具体的值
private int data;
//comeFromArray表明这个值来自于哪一个数组
private int comeFromArray;
public TrackableData(int data,int comeFromArray){
this.data = data;
this.comeFromArray=comeFromArray;
}
public int getData() {
return data;
}
public void setData(int data) {
this.data = data;
}
public int getComeFromArray() {
return comeFromArray;
}
public void setComeFromArray(int comeFromArray) {
this.comeFromArray = comeFromArray;
}
}Copy after login
Then we define a minimum heap, which is the key to solving the problem and needs Note that the elements it contains should be the above-mentioned value objects. When entering the heap and adjusting the heap, the calculations are based on the data field of the value object.
package com.charles.algo.kwaymerge;
/**
* @author charles.wang
*
*/
public class MinHeap {
// 最小堆的存储是一个数组,并且为了计算，我们第一个位置不放内容
private TrackableData[] data;
// 堆的大小
private int heapSize;
// 当前元素的数量
private int currentSize;
public MinHeap(int maxSize) {
heapSize = maxSize;
// 创建一个比最大容纳数量多1的数组的作用是启用掉数组的头元素，为了方便运算，因为从1开始的运算更加好算
data = new TrackableData[heapSize + 1];
currentSize = 0;
}
/**
* 返回当前的堆是否为空
* @return
*/
public boolean isEmpty(){
if(currentSize==0)
return true;
return false;
}
/**
* 这里考察堆的插入，因为最小堆内部结构中数组前面元素总是按照最小堆已经构建好的，所以我们总从尾部插入 解决方法是： Step
* 1:先把当前的元素插入到数组的尾部 Step 2:递归的比较当前元素和父亲节点元素， Step
* 3:如果当前的元素小于父亲节点的元素，那么就把当前的元素上移，直到移不动为止
*
* @param value
* @return
*/
public MinHeap insert(TrackableData value) {
// 首先判断堆是否满了，如果满了就无法插入
if (currentSize == heapSize)
return this;
// 如果堆还没有满，那么说明堆中还有位置可以插入，我们先找到最后一个可以插入的位置
// currentPos表示当前要插入的位置的数组下标
int currentPos = currentSize + 1;
// 先插入到当前的位置，因为是从1开始的，所以数组下标运算也要+1
data[currentPos] = value;
// 然后比较当前元素和他的父亲元素
// 当前元素是data[currentPos] ，父亲元素是 data[(currentPos/2],一直遍历到根
TrackableData temp;
// 如果currentPos为1，表明是插入的堆中第一个元素，则不用比较
// 否则， 如果插了不止一个元素，则用插入位置的元素和其父元素比较
while (currentPos > 1) {
// 如果当前元素小于父亲元素，那么交换他们位置
if (data[currentPos].getData() < data[currentPos / 2].getData()) {
temp = data[currentPos / 2];
data[currentPos / 2] = data[currentPos];
data[currentPos] = temp;
// 更新当前位置
currentPos = currentPos / 2;
}
// 否则， 在假定已有的堆是最小堆的情况下，说明现在插入的位置是正确的，不用变换
else {
break;
}
}
// 插入完毕之后，吧当前的堆中元素的个数加1
currentSize++;
return this;
}
/**
* 这里考察堆的删除 因为是最小堆，所以肯定删除最小值就是删除堆的根元素，此外，还必须要调整剩余的堆使其仍然保持一个最小堆
* 因为有删除最小元素之后最小元素位置就有了个空位，所以解决方法是： Step 1:吧堆中最后一个元素复制给这个空位 Step
* 2:依次比较这个最后元素值，当前位置的左右子元素的值，从而下调到一个合适的位置 Step 3:从堆数组中移除最后那个元素
*/
public TrackableData deleteMin() {
// 如果最小堆已经为空，那么无法删除最小元素
if (currentSize == 0)
return null;
// 否则堆不为空，那么最小元素总是堆中的第一个元素
TrackableData minValue = data[1];
// 既然删除了最小元素，那么堆中currentSize的尺寸就要-1，为此，我们必须为数组中最后一个元素找到合适的新位置
// 堆中最后一个元素
TrackableData lastValue = data[currentSize];
// 先将堆中最后一个元素移动到最小堆的堆首
data[1] = lastValue;
// 把堆内部存储数组的最后一个元素清0
data[currentSize] = null;
// 并且当前的堆的尺寸要-1
currentSize--;
// 现在开始调整堆结构使其仍然为一个最小堆
int currentPos = 1; // 当前位置设置为根，从根开始比较左右
int leftPos = currentPos * 2;
TrackableData leftValue;
TrackableData rightValue;
TrackableData temp;
// 如果左位置和当前堆的总容量相同，说明只有2个元素了，一个是根元素，一个是根的左元素
if (leftPos == currentSize) {
// 这时候如果根左元素data[2]比根元素data[1]小，那么就交换二者位置
if (data[2].getData() < data[1].getData()) {
temp = data[2];
data[2] = data[1];
data[1] = temp;
}
}
else {
// 保持循环的条件是该节点的左位置小于当前堆中元素个数，那么该节点必定还有右子元素并且位置是左子元素位置+1
while (leftPos < currentSize) {
// 获取当前位置的左子节点的值
leftValue = data[leftPos];
// 获取当期那位置的右子节点的值
rightValue = data[leftPos + 1];
// 如果当前值既小于左子节点又小于右子节点，那么则说明当前值位置是正确的
if (data[currentPos].getData() < leftValue.getData()
&& data[currentPos].getData() < rightValue.getData()) {
break;
}
// 否则，比较左子节点和右子节点
// 如果左子节点小于右子节点（当然了，同时小于当前节点），那么左子节点和当前节点互换位置
else if (leftValue.getData() < rightValue.getData()) {
temp = data[currentPos];
data[currentPos] = leftValue;
data[leftPos] = temp;
// 同时更新当前位置是左子节点的位置,并且新的左子节点的位置为左子节点的左子节点
currentPos = leftPos;
leftPos = currentPos * 2;
}
// 如果右子节点小于左子节点(当然了，同时小于当前节点），那么右边子节点和当前节点互换位置
else {
temp = data[currentPos];
data[currentPos] = rightValue;
data[leftPos + 1] = temp;
// 同时更新当前位置是右子节点的位置,并且新的左子节点的位置为右子节点的左子节点
currentPos = leftPos + 1;
leftPos = currentPos * 2;
}
}
}
return minValue;
}
}Copy after login
Finally, let’s implement the K-way combiner, which is quite easy to implement, but special care must be taken when it comes to some subscript operations. Because we want to be universal, both k and n are passed in. In fact, if we plan k and n in advance, we don't need to maintain these numbers internally at all, because we only need to store them in the minimum heap.
package com.charles.algo.kwaymerge;
import java.util.ArrayList;
import java.util.List;
/**
*
* 这个类用于演示K路合并
*
* @author charles.wang
*
*/
public class KWayMerger {
private KWayMerger() {
}
/**
* k路合并，这里的指导思想如下：
*
* (1)首先构造一个最小堆，其中堆中的元素初始值为每个数组中的最小元素
* (2)每次从最小堆中打印并且删除最小元素，然后把这个最小元素所在的数组中的下一个元素插入到最小堆中 (3)每次（2）结束后调整堆来维持这个最小堆
*/
public static void mergeKWay(int k, int n, List<int[]> arrays) {
// 这里存储了所有每个数组的当前的下标,在没有开始插入之前，每个数组的当前下标都设为0
int[] indexInArrays = new int[k];
for (int i = 0; i < k; i++) {
indexInArrays[i] = 0;
}
// 首先构造一个最小堆,其大小为k
MinHeap minHeap = new MinHeap(k);
// 第一步，依次吧每个数组中的第一个元素都插入到最小堆
// 然后把所有数组的下标都指向1
for (int i = 0; i < k; i++) {
// 这里每个都构造TrackableData对象：
// 其中：arrays.get(i)[0]表示它值为第i个数组的下标为0的元素（也就是第i个数组的第一个元素）
// i表示这个对象来自于第i个数组
minHeap.insert(new TrackableData(arrays.get(i)[0], i));
indexInArrays[i] = 1;
}
// 第二步，对最小堆进行反复的插入删除动作
TrackableData currentDeletedData;
TrackableData currentInsertedData;
int arrayIdForDeletedData;
int nextValueIndexInArray;
// 循环的条件是k个数组中至少有一个还有值没有被插入到minHeap中
while (true) {
// 这个变量维护了有多少个数组当前下标已经越界，也就是数组所有元素已经被完全处理过
int noOfArraysThatCompletelyHandled = 0;
// 就是去查询维护所有数组当前下标的数组，如果都越界了，那么就说明都比较过了
for (int i = 0; i < k; i++) {
if (indexInArrays[i] == n)
noOfArraysThatCompletelyHandled++;
}
// 如果所有的数组中的所有的值都比较过了，那么查看堆中内容是否为空。
if (noOfArraysThatCompletelyHandled == k) {
while (!minHeap.isEmpty()) {
currentDeletedData = minHeap.deleteMin();
// 打印出当前的数
System.out.print(currentDeletedData.getData() + " ");
}
break;
}
currentDeletedData = minHeap.deleteMin();
// 打印出当前的数
System.out.print(currentDeletedData.getData() + " ");
// 获取当前的被删的数来自于第几个数组
arrayIdForDeletedData = currentDeletedData.getComeFromArray();
// 获取那个数组的当前下标
nextValueIndexInArray = indexInArrays[arrayIdForDeletedData];
// 如果当前下标没有越界，说明当前数组中还有元素，则找到该数组中的下个元素
if (nextValueIndexInArray < n) {
// 构造新的TrackableData，并且插入到最小堆
currentInsertedData = new TrackableData(
arrays.get(arrayIdForDeletedData)[nextValueIndexInArray],
arrayIdForDeletedData);
minHeap.insert(currentInsertedData);
// 同时更新维护数组当前下标的数组，让对应数组的当前下标+1
indexInArrays[arrayIdForDeletedData]++;
}
// 如果当前下标已经越界，说明这个数组已经没有任何元素了，则找下一个有值的数组的最小元素
else {
while (true) {
arrayIdForDeletedData = (arrayIdForDeletedData + 1) % k;
// 获取那个数组的当前下标
nextValueIndexInArray = indexInArrays[arrayIdForDeletedData];
if (nextValueIndexInArray == n)
continue;
else {
// 构造新的TrackableData，并且插入到最小堆
currentInsertedData = new TrackableData(
arrays.get(arrayIdForDeletedData)[nextValueIndexInArray],
arrayIdForDeletedData);
minHeap.insert(currentInsertedData);
// 同时更新维护数组当前下标的数组，让对应数组的当前下标+1
indexInArrays[arrayIdForDeletedData]++;
break;
}
}
}
}
}
}Copy after login
Experiment:
Finally, let’s demonstrate. Suppose we have 32 numbers. We divide them into 4 ways of merging, each way has 8 numbers, and these 8 numbers have been sorted. .
Then we use the K-way merging algorithm to sort all 32 numbers:
public static void main(String[] args) {
// 我们来演示K路合并，假设我们有4组已经排序了的数组，每组有8个数，则n=8,k=4
int[] array1 = { 4, 5, 7, 8, 66, 69, 72, 79 };
int[] array2 = { 3, 9, 42, 52, 53, 79, 82, 87 };
int[] array3 = { 1, 17, 21, 31, 47, 55, 67, 95 };
int[] array4 = { 6, 28, 49, 55, 68, 75, 83, 94 };
System.out.println("这里演示K路合并，其中每个数组都事先被排序了，并且长度为8,我们分4路合并");
System.out.println("数组1为：");
for(int i=0;i<array1.length;i++)
System.out.print(array1[i]+" ");
System.out.println();
System.out.println("数组2为：");
for(int i=0;i<array2.length;i++)
System.out.print(array2[i]+" ");
System.out.println();
System.out.println("数组3为：");
for(int i=0;i<array3.length;i++)
System.out.print(array3[i]+" ");
System.out.println();
System.out.println("数组4为：");
for(int i=0;i<array4.length;i++)
System.out.print(array4[i]+" ");
System.out.println();
List<int[]> arrayLists = new ArrayList<int[]>(4);
arrayLists.add(0, array1);
arrayLists.add(1, array2);
arrayLists.add(2, array3);
arrayLists.add(3, array4);
KWayMerger kWayMerger = new KWayMerger(4, 8, arrayLists);
System.out.println("排序后，结果为：");
kWayMerger.mergeKWay();
System.out.println();
}Copy after login
The final running result is:
Obviously the result is correct and our method supports duplicate values.
The above is the detailed content of Detailed explanation of K-way merge sort (practical combat). For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
