CPU is the core of computer hardware system. What does it consist of?

CPU is composed of "operator" and "controller". The core part of the central processing unit (CPU) is the controller and arithmetic unit, which plays an important role in improving the overall function of the computer. It can realize the proliferation of multiple functions such as register control, logical operations, and signal transmission and reception, and is used to improve the performance of the computer. A good foundation for performance.

The operating environment of this tutorial: Windows 7 system, Dell G3 computer.

CPU is the core of the computer hardware system, which is composed of arithmetic units and controllers.

Central processing unit (CPU) is one of the main devices of electronic computers and the core component of computers. Its function is mainly to interpret computer instructions and process data in computer software. The CPU is the core component of the computer that reads instructions, decodes them, and executes them.

Generally speaking, the structure of the CPU can be roughly divided into operational logic components, register components and control components. The so-called arithmetic logic component can mainly perform related logical operations, such as: it can perform shift operations and logical operations. In addition, it can also perform fixed-point or floating-point arithmetic operations, address operations, conversion and other commands. It is a multi-purpose Functional arithmetic unit. The register component is used to temporarily store instructions, data and addresses. The control component is mainly used to analyze instructions and issue corresponding control signals.

For the central processing unit, it can be regarded as a large-scale integrated circuit, and its main task is to process and process various data. The storage capacity of traditional computers is relatively small, which makes it difficult to process large-scale data, and the processing effect is relatively low. With the rapid development of my country's information technology level, high-configuration processor computers have emerged. High-configuration processors are used as control centers and play an important role in improving the structure and function of computer CPUs.

The core part of the central processing unit is the controller and arithmetic unit, which play an important role in improving the overall function of the computer and can realize multiple functions such as register control, logical operations, and signal transmission and reception. Diffusion, laying a good foundation for improving computer performance.

Integrated circuits play a role in regulating signals within the computer and perform different instruction tasks according to user operation instructions. The central processing unit is a very large-scale integrated circuit. It consists of arithmetic units, controllers, registers, etc., as shown in the figure below. The key operation lies in the processing and processing of various types of data.

#Traditional computers have small storage capacity and low operating efficiency when faced with large-scale data sets. The new generation of computers uses high-configuration processors as the control center, and the CPU has great room for improvement in terms of structure and function. The central processing unit uses arithmetic units and controllers as its main devices, and gradually expands into multiple functions such as logical operations, register control, program coding, and signal transmission and reception. These speed up the optimization and upgrade of CPU control performance.

The core part of the CPU

The calculator

The calculator refers to the computer that performs various tasks A component that operates arithmetic and logical operations, where the arithmetic logic unit is part of the central processing core.

(1) Arithmetic logic unit (ALU). Arithmetic logic unit refers to a combinational logic circuit that can realize multiple sets of arithmetic operations and logical operations. It is an important part of central processing. The operations of the arithmetic logic unit are mainly two-bit arithmetic operations, such as addition, subtraction, and multiplication. During the operation process, the arithmetic logic unit mainly performs arithmetic and logical operations using computer instructions. Generally speaking, the ALU can play the role of direct read-in and read-out, which is specifically reflected in the processor controller, memory and input and output devices. , input and output are implemented based on the bus. The input command contains an instruction word, including operation code, format code, etc.

(2) Intermediate register (IR). Its length is 128 bits, and its actual length is determined by the operands. IR plays an important role in the "push and fetch" instruction. During the execution of this instruction, the content of ACC is sent to IR, then the operand is fetched to ACC, and then the content of IR is pushed onto the stack.

(3) Operation accumulator (ACC). Current registers are generally single accumulators with a length of 128 bits. For ACC, it can be regarded as a variable-length accumulator. In the process of describing instructions, the expression of ACC length is generally based on the value of ACS, and the ACS length is directly related to the ACC length. Doubling or halving the ACS length can also be regarded as doubling or halving the ACC length.

(4) Descriptor register (DR). It is mainly used to store and modify descriptors. The length of DR is 64 bits. In order to simplify data structure processing, the use of descriptors plays an important role.

(5)B register. It plays an important role in the modification of instructions. The length of the B register is 32 bits. It can save the address modification amount during the address modification process. The main memory address can only be modified with a descriptor. The descriptor points to the first element in the array, so accessing other elements in the array should require modifiers. For arrays, they are composed of data or elements of the same size and are stored continuously. The common access method is a vector descriptor, because the address in the vector descriptor is a byte address, so when proceeding During the conversion process, the base addresses should first be added. For the conversion work, it is mainly implemented automatically by the hardware. In this process, special attention must be paid to alignment to avoid exceeding the array boundaries.

Controller

The controller refers to changing the wiring of the main circuit or control circuit in a predetermined sequence and changing the resistance value in the circuit to control the starting, speed regulation, and Braking and reverse master device. The controller is composed of program status register PSR, system status register SSR, program counter PC, instruction register, etc. As a "decision-making mechanism", its main task is to issue commands and play a coordination and command role in the operation of the entire computer system. There are two main categories of control: combinational logic controllers and microprogrammed controllers. Both parts have their own advantages and disadvantages. Among them, the combinational logic controller has a relatively complex structure, but its advantage is that it is faster; the microprogrammed controller has a simple structure, but when modifying a machine instruction function, the entire microprogram needs to be reprogrammed.

For more related knowledge, please visit the FAQ column!

The above is the detailed content of CPU is the core of computer hardware system. What does it consist of?. For more information, please follow other related articles on the PHP Chinese website!