Is the router a cat?
The operating environment of this tutorial: Windows 10 system, Dell G3 computer.
Nowadays, wifi has become something that many people cannot do without, but many people don’t know how wifi signals are generated, let alone the difference between routers and cats. Some people even confuse the two and think they are. Same kind of thing. In fact, the wifi signal in our home is related to both, but they play completely different roles. Let’s take a look at the difference between routers and cats.
The difference between a router and a cat
A router is a hardware device that connects two or more networks , which acts as a gateway between networks, is a dedicated intelligent network device that reads the address in each data packet and then decides how to transmit it. It can understand different protocols, such as the Ethernet protocol used by a local area network.
Optical modem is the abbreviation of optical modem, also known as single-port optical transceiver. It is a three-piece set of optical fiber transmission equipment developed for special user environments. The device uses a large-scale integrated chip with simple circuit, low power consumption and high reliability. It has complete alarm status indication and complete network management functions.
#1. Definitions are different
A modem communicates with your internet service provider’s network, while a router basically Used to share network connections to multiple devices.
2. Different shapes
The shape of a cat is relatively simple, like a flat rectangular box, very small, while the shape of routers is diverse. There are rectangular ones and oval ones. The overall size is larger than that of a cat, and wireless routers also come with different numbers of antenna devices.
3. Different functions
A cat is a necessary device for computer networking. Only with a cat can a computer be able to dial-up the Internet, and a router is a tool that helps multiple computers For devices that share a network, with the help of a router, several computers can access the Internet on the same network cable. However, a router is not a necessary device for computers to access the Internet. Without a router, computers can still access the Internet through a modem.
4. Different connection methods
Due to their different functions, the connection methods of the two are also different. One end of the cat is connected to the telephone line, and the other end is connected to the computer or router. , and one end of the router is connected to the cat, and the other end can only be connected to the computer. Directly connecting the telephone line and the computer with the router cannot achieve networking.
5. Different ports
The port shapes and numbers of the two are different. There are generally only two ports on the cat, one is connected to the phone line and the other is connected to the network cable. The router has more ports, usually five, one is connected to the modem, and the rest can be connected to one or more computers at will.
For more related knowledge, please visit the FAQ column!
The above is the detailed content of Is the router a cat?. For more information, please follow other related articles on the PHP Chinese website!

Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

AI Hentai Generator
Generate AI Hentai for free.

Hot Article

Hot Tools

Notepad++7.3.1
Easy-to-use and free code editor

SublimeText3 Chinese version
Chinese version, very easy to use

Zend Studio 13.0.1
Powerful PHP integrated development environment

Dreamweaver CS6
Visual web development tools

SublimeText3 Mac version
God-level code editing software (SublimeText3)

Hot Topics



The sys of the router means system operating status indication, and the full name is System; the router uses the sys indicator light to inform the user of the operating status of the device. If the router is faulty or restarting, the indicator light will flash; the indicator light of the router can be divided into power Indicator light, sys system indicator light, LAN indicator light and WAN indicator light.

Can. However, you need to pay attention to some issues: 1. Placing the router upside down may have a certain impact on heat dissipation, causing heat to accumulate at the bottom of the router, affecting the heat dissipation effect. Long-term overheating may reduce the performance of the router and adversely affect its lifespan. ; 2. Placing the router upside down may affect the operation and management of the device, and the indicator lights and interfaces may be blocked or inconvenient to operate; 3. Placing the router upside down may also have a certain impact on network security, and the default user name and password may cause This information is more susceptible to prying eyes.

In routers, sn stands for "Serial Number", which means "serial number" and refers to the factory number of the router. The router serial number (SN) and physical address are both hardware identifiers, which are unique; the router will be under warranty only if the router's serial number is kept intact. The router serial number SN can be seen directly in the manual and on the back of the router.

Students who know computers all know that if our computer wants to connect to the network, it must have an IP address. This IP address can be manually configured, such as 172.16.19.20; it can also be automatically obtained by the DHCP server of the computer network card, such as 192.168.1.100 etc. These IP addresses are what we often call IPV4 addresses, and the corresponding IPV6 is also a type of IP address. What is IPV6 IPV6 is a new IP address that emerged in response to the exhaustion of IPV4 address resources. Its full name is "Internet Protocol Version 6", and its Chinese name is the sixth generation of Internet Protocol. The number of IPv6 addresses is theoretically 2^128

The first light is on, indicating that the router is powered on. Which port is plugged in, the light of which port is on, and flashing means data is being transmitted. Wireless routers usually have three indicator lights: SYS, LAN and WAN. When the wireless router is powered on, the SYS light will light up. When the wireless router is connected to the network modem, the WAN light will light up. The LAN light corresponds to each interface of the wireless router. As long as the network cable is inserted into the corresponding interface, the corresponding LAN light will light up. 1. If it keeps flashing, it means it is transmitted by data, and the router settings should be normal. 2. If you have always been able to access the Internet, but you can't get online recently; it is probably a problem with the external line, that is, a problem with the operator (usually there is a problem with the line, causing the data signal to attenuate too much, although the line is good)

The difference between gateway WiFi and router WiFi is mainly reflected in three aspects: function, number of terminals that support Internet access, and WiFi signal coverage. Gateway WiFi is a combination of optical modem and router. It has more functions, but it supports fewer Internet devices and the WiFi signal coverage is not as good as router WiFi.

Reasons why the router is connected but cannot access the Internet: 1. Internet service provider problem; 2. Router setting problem; 3. LAN problem; 4. WiFi signal problem; 5. Router hardware problem; 6. DNS problem; 7. Network cache problem ; 8. Firewall and security software issues; 9. Operator restrictions; 10. Equipment failure. Detailed introduction: 1. Internet service provider problems. This is a common reason. Internet service providers may have problems, such as network interruption or service interruption; 2. Router setting problems, etc.

The impact of turning off dhcp on the router: 1. The client cannot automatically obtain an IP address; 2. The IP address needs to be configured manually; 3. It may cause network connection problems; 4. It affects the communication of network devices; 5. IP address conflicts; 6. Unable to proceed Dynamic address allocation; 7. Network isolation cannot be performed; 8. Traffic control cannot be performed; 9. Access control cannot be performed. It is recommended that before turning off the DHCP service, carefully consider whether it really needs to be turned off, or keep the DHCP service to ensure that the client can automatically obtain the correct IP address.