Is the Category 6e cable marked 6e or 6a?
The Category 6e network cable mark is 6a, and its complete logo is CAT6A; CAT6E is an improved version of CAT6, but not CAT6A; Category 6e network cables and Category 6 network cables generally have insulation added to their internal structures. Cross skeleton, and 4 pairs of twisted pairs are arranged in the 4 grooves of the cross skeleton. However, the cross skeleton inside the Category 6e network cable generally uses a gear-shaped wire groove shape, while the cross skeleton of the Category 6 network cable They are usually separated by one word.
#The operating environment of this tutorial: Windows 7 system, Dell G3 computer.
Is the Category 6e cable marked 6e or 6a?
The mark on the sheath of Category 6 network cable is CAT6, and the mark on the sheath of Category 6e network cable is CAT6A. Note that it is not CAT6E. CAT6E (Category 6) is an improved version of CAT6 (Category 6). But not CAT6A (Category 6A).
The internal structure of Category 6e network cables and Category 6 network cables generally adds a cross skeleton with insulating effect, and four pairs of twisted pairs are arranged in the cross Within the four grooves of the skeleton, the cross skeleton inside the Category 6e network cable generally uses a gear-shaped cable trough shape, while the cross skeleton of the Category 6 network cable is generally isolated in one line.
Note:
Since the outer diameter of Category 6 cable is thicker than that of general Category 5 cable, in order to avoid the entanglement of the cable (especially At the elbow), when designing the pipeline, we must pay attention to the filling degree of the pipe diameter. Generally, it is appropriate to put two Category 6 wires in a pipe with an inner diameter of 20mm.
The bridge is designed reasonably to ensure appropriate cable bending radius. When going up, down, left, and right around other wire troughs, the turning slope should be gentle. Pay attention to whether the cover can be covered without damaging the cable after the cables at both ends are drooped and stressed.
During the pay-out process, the main thing is to pay attention to the control of the tension. For cables packaged with reels, it is recommended to arrange at least one worker at each end to put the reel on the homemade pull rod. The worker at the pay-out end first Pre-pull a part of the cable from the reel box for the collaborator to extract at the other end of the pipeline. The pre-pulled wire should not be too much to avoid multiple wires getting tangled and wrapped around the venue.
For more related knowledge, please visit the FAQ column!
The above is the detailed content of Is the Category 6e cable marked 6e or 6a?. For more information, please follow other related articles on the PHP Chinese website!

Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

AI Hentai Generator
Generate AI Hentai for free.

Hot Article

Hot Tools

Notepad++7.3.1
Easy-to-use and free code editor

SublimeText3 Chinese version
Chinese version, very easy to use

Zend Studio 13.0.1
Powerful PHP integrated development environment

Dreamweaver CS6
Visual web development tools

SublimeText3 Mac version
God-level code editing software (SublimeText3)

Hot Topics

The 2.5g network port uses Category 5e network cables and can be connected to Gigabit network cables. The 2.5G port is a network interface with a rate of 2.5Gbps. The actual rate is usually calculated as 2500Mbps; and the Category 5e network cable (cat 5e) can fully meet the transmission requirements of 2.5Gbps and 1000Mbps. Category 5e unshielded twisted pair is a cable that has improved some of the performance of Category 5 shielded twisted pair. Many performance parameters, such as near-end crosstalk, attenuation to crosstalk ratio, return loss, etc., have been improved. But its transmission bandwidth is still 100MHz.

The logo of Category 6e network cable is 6a, and its complete logo is CAT6A; CAT6E is an improved version of CAT6, but not CAT6A; Category 6e network cable and Category 6 network cable generally have a cross skeleton with insulating effect added to the internal structure, and will Arrange 4 pairs of twisted pairs in the 4 grooves of the cross frame respectively. However, the cross frame inside the Category 6e network cable generally uses a gear-shaped cable trough shape, while the cross frame of the Category 6 network cable is generally a straight line. Isolated.

"hsyv-6" is Category 6 twisted pair (network cable); hsyv means twisted pair, and "6" means CAT6, which is Category 6. Category 6 network cable supports up to Gigabit network, which is 100M Category 5 An upgraded version of the network cable, the Category 6 twisted pair is somewhat different from the Category 5 or Category 5e twisted pair in appearance and structure. It not only adds an insulated cross frame, but also separates the four pairs of twisted pairs. in the four grooves of the cross frame, and the diameter of the cable is also thicker.

hsyv-5e is a Category 5e network cable; hsyv represents the structure of the line, and 5e represents Category 5e. Its transmission frequency is as high as 100MHz. It is a Gigabit network cable and can be used in Gigabit networks, and the hsyv-5e center line The twist of the pair is denser, the signal transmission is faster, the quality is better, and the durability is better.

There are three solutions to the problem that the network cable is plugged in but the network cannot be recognized: 1. Unplug the network cable and restart the router; 2. Press Win+X, select Settings, click Network and Internet, select Ethernet and click Change Adapter Options, click After selecting Disable Local Connection, click again to select Enable; 3. Click Status in the Network and Internet interface, then select Network Reset in the pop-up interface, click Reset Now, and then the computer will restart within 5 minutes to complete the reset.

hsyu5e is a Category 5e twisted pair, which has the characteristics of small attenuation and less crosstalk, and has higher attenuation to crosstalk ratio (ACR) and signal to noise ratio (signal to noise ratio), smaller delay difference, high performance greatly improved. The transmission frequency of hsyu5e is as high as 100MHz. It is a Gigabit network cable and can be used in Gigabit networks. The twisting degree of the wire pairs in hsyv5e is relatively dense, so the signal transmission is fast, the quality is better, and the durability is better.

The line sequence of class b network cable refers to the line sequence of class b network cable. According to the standard wiring of T568B, 12345678 is orange and white, orange, green and white, blue, blue and white, green, brown and white, and brown. Both ends of the network cable follow this Prepare the crystal head in line sequence.

The difference between console cable and network cable: 1. Definition and use; 2. Transmission rate; 3. Structure and material; 4. Interface type; 5. Application scenarios; 6. Security. Detailed introduction: 1. Definition and use. The console cable is a cable used to connect the computer host and network equipment. It is usually used to debug network equipment, such as routers, switches, etc. The network cable is a cable used to connect computers, switches, etc. Cables for routers and other equipment are used to implement network communication; 2. Transmission rate, the transmission rate of the Console line is usually higher, etc.