What cable should be connected to the aafp interface?

The aafp interface should be connected to the power switch wire, the reset switch wire, and the power light wire. When the aafp interface is connected to the power cord, the plug of the switch has two pins to facilitate user identification. The interface is usually represented by yellow and black, and the other interface is represented by white. The aafp interface is connected to the reset switch with two pins. One is marked in blue and the other is marked in white. The function is to restart your computer with uninterrupted power. The aafp interface also uses a two-pin plug to connect the power light. Its indicator is usually green to indicate startup.

The operating environment of this tutorial: Windows 7 system, Dell G3 computer.

The aafp interface can be connected to the power switch wire, the reset switch wire, and the power light wire.

The aafp interface is the front panel audio connection pin. After installing the motherboard into the chassis, you can connect the HDAUDIO cable on the front panel of the chassis to the AAFP pin header on the ASUS motherboard. After normal startup, there will be sound effects through the audio hole on the front panel of the chassis.

#The function of AAFP is to enable the 3.5mm jack on the front panel to transmit audio. There will be a wire drawn in a circle to short-circuit the two pins in this interface. Its location is in the audio area in the lower left corner of the motherboard. Some motherboards have dividing lines to separate the audio area.

AAFP is also a 9-pin jumper interface. The difference is that the missing pin is the second one from the upper right. This can be distinguished from the USB 2.0 jumper interface.

aafp interface The interface that supplies power to the motherboard adopts a fool-proof design and can only be inserted in the correct way. Through careful observation, you will also find that there is a raised groove on one side of the motherboard's power supply interface, and a snap-on design is also used on one side of the power supply interface. The advantage of this design is that it prevents the user from plugging it in reverse. , on the other hand, it can also make the two interfaces more firmly installed together.

When the aafp interface is connected to the power cord, its switch plug has two pins for easy identification by the user. One of the connections is usually yellow or black. means, and the other connection is usually white. This plug must be plugged in, otherwise the computer cannot be started through the chassis panel. In addition, it can also be started by directly shorting the POWER pin on the motherboard. The connecting plug of this switch is usually marked with POWER SW, and the English abbreviation near the corresponding pin on the motherboard is generally PWR, Power SW, PWR SW, PW, PW SW or PS, etc.

The aafp interface connected to the reset switch is also inserted with two pins, one of which is marked with blue and the other with white. Its function It uses power to restart your computer without interruption. It is usually used when the computer suddenly freezes and cannot be used while it is running. This is what people call a computer crash.

The connection between the aafp interface and the power light is also a two-pin plug. Its indicator is usually green to indicate the idea of ​​starting, while the other is white. Generally, when the device is turned on by the user, the power indicator light will light up. Sometimes, the power light switch is not connected to the motherboard, but to other power interfaces.

For more related knowledge, please visit the FAQ column!

The above is the detailed content of What cable should be connected to the aafp interface?. For more information, please follow other related articles on the PHP Chinese website!