etc. Can I use the data cable to charge when the battery is out?

You cannot use the data cable to charge when etc. is out of power, because etc. use solar batteries and have no charging interface. As long as there is sunshine, it will charge; if the sun shines for a while, it will charge. If there is still no power, you can find an etc outlet and ask for a new etc device.

The operating environment of this tutorial: Windows 10 system, Dell G3 computer.

Can I use the data cable to charge when the battery is out?

etc. When the battery is out of power, the data cable cannot be used to charge, and there is no charging interface.

ETC uses solar batteries. As long as there is sunlight, it will charge. It is recommended that you put the car in the sun for a while and it should be charged.

If there is still no power after being exposed to sunlight for a while, then you should find an etc outlet and ask for a new etc device. This etc equipment bank provides free replacements at no cost, but sometimes it may not need to be replaced. The outlet can directly replace a battery for you, or rescan it. I forgot the details.

I had such an experience once. ETC was not easy to use. After I took the draft to the bank and processed it for me, it was fine.

It is recommended that you consult your etc. bank branch, they will solve it for you soon.

Related introduction:

Fully automatic electronic toll collection system (ETC, Electronic Toll Collection) is one of the service functions of the intelligent transportation system. It is especially suitable for highways or heavy traffic. Used in bridge and tunnel environments. The expressway toll office has a dedicated ETC toll channel. As long as the car owner installs a proximity card on the front windshield of the vehicle and pre-deposits the fee, there is no need to pay manually when passing the toll station, and there is no need to stop. The highway toll will be automatically deducted from the card, thus enabling automatic charging. This toll collection system takes less than two seconds to charge each vehicle, and its toll channel capacity is 5 to 10 times that of manual toll channels. The use of a fully automatic electronic toll collection system can make highway toll collection paperless and cashless management, fundamentally eliminate the loss of toll fares, and solve the problem of chaotic financial management in highway toll collection. In addition, implementing a fully automatic electronic toll collection system can also save infrastructure and management costs.

This system requires an on-board device carrying vehicle information to be installed on the vehicle. When a vehicle enters the entrance of the non-stop electronic toll channel, the station-level device of the highway data collection and processing system reads the vehicle information in the vehicle-mounted device, retrieves the matching vehicle data from the database and performs release processing. The record is stored and uploaded to the highway data at the same time. The data management center of the collection and processing system. The data management center analyzes passing vehicles and uploads deduction transactions to the bank in real time. After the bank completes transaction processing, it returns to the data management center in real time.

For more related knowledge, please visit the FAQ column!

The above is the detailed content of etc. Can I use the data cable to charge when the battery is out?. For more information, please follow other related articles on the PHP Chinese website!