What to do if the modem firmware is blank
Reasons and solutions for blank modem firmware: 1. If the signal is locked, you can purchase a special card and use it after cracking; 2. If the baseband in the system is incorrect, you can flash the machine, and it is recommended Flash the corresponding and latest version of the system; 3. If the SIM card slot is faulty or the phone card has poor contact, you can pull out the card and put it back in again.
The operating environment of this tutorial: iOS12.4.1 system, iPhone 11 mobile phone.
What should I do if the modem firmware is blank?
The analysis is as follows:
There are several possibilities for this kind of failure:
1: The mobile phone is a parallel import and has a lock, the signal is locked, and the card is loaded Afterwards, signals in mainland China cannot be used.
2: The system of the mobile phone is wrong, that is to say, the baseband in the system is wrong, resulting in the inability to use the wireless function and the inability to search for signals.
3: The SIM card slot of the mobile phone is faulty or the mobile phone card has poor contact, resulting in the mobile phone card being unable to be recognized.
The first solution is to purchase a special card sticker, which can be used after being cracked.
The second solution is to flash the machine. It is recommended to flash the corresponding and latest version of the system.
The third solution is to pull out the card and reinsert it. If it still doesn't work, you can only send it to a repair shop for repair.
Extended information
Maintenance of mobile phones
As the saying goes, "prevention is better than cure", if you wait until something goes wrong with your phone every time to remedy it, it may already be too late! The following are 5 examples of how to easily damage your mobile phone. All of them are common mistakes. If you can do them, you can keep your mobile phone in a safe state.
Taboo 1: Avoid touching the metal piece of the SIM card. Any scratches or damage will cause the SIM card to become unreadable.
Taboo 2: Do not place your mobile phone at the air-conditioning outlet, because the moisture condensed on the mobile phone will corrode the machine board invisibly.
For more related knowledge, please visit the FAQ column!
The above is the detailed content of What to do if the modem firmware is blank. For more information, please follow other related articles on the PHP Chinese website!
Hot AI Tools
Undresser.AI Undress
AI-powered app for creating realistic nude photos
AI Clothes Remover
Online AI tool for removing clothes from photos.
Undress AI Tool
Undress images for free
Clothoff.io
AI clothes remover
Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!
Hot Article
Hot Tools
Notepad++7.3.1
Easy-to-use and free code editor
SublimeText3 Chinese version
Chinese version, very easy to use
Zend Studio 13.0.1
Powerful PHP integrated development environment
Dreamweaver CS6
Visual web development tools
SublimeText3 Mac version
God-level code editing software (SublimeText3)
Hot Topics
What to do if the modem firmware is blank
Mar 17, 2023 pm 03:25 PM
Reasons and solutions for blank modem firmware: 1. If the signal is locked, you can purchase a special card and use it after cracking; 2. If the baseband in the system is incorrect, you can flash the machine, and it is recommended to flash the corresponding and latest version. system; 3. If the SIM card slot is faulty or the phone card has poor contact, you can pull out the card and put it back in again.
Fix: Modem reported error code 651 in Windows 11, 10
Apr 20, 2023 am 09:04 AM
Several Windows users have recently complained that when they tried to connect a modem on their PC to access the internet, it produced an error stating that the modem (or other connected device) reported a problem with error code 651 and was not allowed to connect to system. This issue may be caused by system or modem failure, outdated network card driver, auto-tuning option not disabled, etc. Keeping all these things in mind, this article will show you various fixes that may be able to resolve this issue and allow users to connect a modem to the system. If you're facing similar issues, read on to learn more. Before that, you can try these workarounds given below - Restart your system a few times and check if the issue gets resolved
Usually, if a computer wants to connect to the Internet, what equipment should be installed?
Jul 28, 2022 pm 03:05 PM
To connect a computer to the network, the device that should be installed is a "modem" or a "network card". Network cards are used to connect computers and communication cables for high-speed data transmission between computers via cables; while modems are necessary equipment for PCs to access the Internet through telephone lines (dial-up mode). Accessing the Internet (Internet) through dial-up (telephone network) means that the user's computer uses a modem to connect to the ISP through the telephone network, and then accesses the Internet through the ISP connection.
When using dial-up to access the Internet, what should the telephone line coming from outside be connected to?
Jul 28, 2022 am 11:20 AM
It should be connected to the "Interface marked Line on the modem". A modem is a device that must be used when a personal computer connects to the Internet through dial-up. The Line interface of the modem is used to connect the telephone line coming from outside, and the Phone interface is used to connect the telephone.
What is a device that converts digital signals into analog signals?
Jul 14, 2022 pm 04:00 PM
A "modem" is a device that converts digital signals into analog signals. Modem is the collective name of modulator and demodulator. Modulation is to convert digital signals into analog signals transmitted on telephone lines; demodulation is to convert analog signals into digital signals. At the sending end, the modem modulates the digital signal generated by the computer's serial port into an analog signal that can be transmitted through the telephone line; at the receiving end, the modem converts the analog signal input into the computer into the corresponding digital signal and sends it to the computer interface.
Qualcomm launches 5G Snapdragon X70 modem that could appear in 2023 iPhones
May 01, 2023 pm 05:13 PM
Qualcomm has unveiled its new 5GS Snapdragon X70 modem, which may be the last Qualcomm modem Apple uses in its iPhones before moving to in-house custom-designed chips. Qualcomm says its latest smartphone 5G modems include "the world's first 5GAI processor integrated in a 5G modem-RF system," which should improve average download and uplink speeds in millimeter wave and sub-6GHz bands. Press release from the company: Snapdragon X70 inherits the unparalleled 10Gigabit 5G peak download speeds of its predecessor and includes new advanced features such as Qualcomm 5GAI
What are the functions of modem
Jan 14, 2021 pm 04:36 PM
The functions are: 1. Convert the data signal sent by the source into an analog signal suitable for analog channel transmission; 2. At the receiving end, it synchronously extracts and phase-locks the synchronization information sent to generate the same frequency as the source. , a carrier in the same phase, used for timing and sampling of the signal sink to ensure synchronization of the signal source and the signal sink; 3. Compensate for the interference damage to the signal caused by harmful factors; 4. Utilize the orthogonality of the seat number and use a variety of coding and modulation methods to achieve Channel multiplexing; 5. Direct connection; 6. Automatic redialing; 7. Soft phone book, allowing users to control calls through software; 8. Baud conversion.
What kind of device is a modem?
Aug 23, 2022 pm 03:03 PM
A modem (modem) is a device that converts "digital signals" and "analog signals" into each other; it converts digital signals into analog signals through modulation at the sending end, and then converts analog signals into digital signals through demodulation at the receiving end. A modem translates a computer's digital signals into analog signals that can be sent along an ordinary telephone line. These analog signals can then be received by another modem at the other end of the line and translated into a language that the computer can understand.