How to fix Magic Keyboard connection refused issue.
Magic Keyboard Connection Rejected: How to Fix
You may have tried the previous solutions, but if you haven’t...
- Turn off Magic Keyboard and Turn it back on
- The small toggle switch on the back edge on new models or the power button on the right edge on older models
- Make sure Bluetooth on your Mac is turned on (top right corner or the Bluetooth icon in the menu bar)
- Connect the Magic Keyboard to your Mac using a Lightning cable
- Leave it plugged in for at least a minute before disconnecting
- You can also Make sure the keyboard has enough battery life by clicking the Bluetooth icon and looking to the right side of the Magic Keyboard
- On older models without a Lightning port, you may need to replace the battery
If you still receive the "Magic Keyboard Connection Rejected" message
- Check that your Mac is running the latest software
- System Preferences>Software Update
- Unpair the Magic Keyboard from any other Mac or device it was previously paired with
- You can also pair it Unpair and fix it from the Mac you're trying to use it with
If you still see Magic Keyboard connection refused:
- Try to eliminate interference:
- Bring your Mac and Bluetooth devices closer
- Remove other devices that may be on or near your desk, such as phones, cameras, power cords, etc.
- Move some WiFi devices to 5GHz since both Bluetooth and WiFi use 2.4GHz
- Move the USB/Thunderbolt hub away from the Mac and Bluetooth devices (do not place them on top of the Mac)
- Turn off USB devices when not in use
- Finally, don’t place materials like metal or concrete between your Mac and your Bluetooth device
If the Magic Keyboard connection refused error is still not resolved, you can try Reset your Mac's Bluetooth module.
Reset your Mac’s Bluetooth module
Remember, this will disconnect all Bluetooth accessories, including the mouse/keyboard. It's a good idea to have a wired keyboard/mouse for your Mac desktop as a backup.
In macOS Monterey
If you are still experiencing Bluetooth issues, you can reset your Mac's Bluetooth module:
Option shift click the Bluetooth icon in the menu bar ( Details below) The Bluetooth reset option does not appear in Monterey, so you need to run a terminal command.
- Open the terminal
- Enter the command "sudo pkill bluetoothd"
- Press the Enter key and enter your password in the query
- Repeat Set up your Mac

In macOS Big Sur or earlier
- Hold down the option shift key on your keyboard and click Click the Bluetooth icon in the menu bar
- Click "Reset Bluetooth Module"
- In the confirmation prompt, select "OK"
- Your Bluetooth device will be reset in the module when disconnected and should automatically reconnect
This is what it looks like:

The above is the detailed content of How to fix Magic Keyboard connection refused issue.. For more information, please follow other related articles on the PHP Chinese website!

Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

AI Hentai Generator
Generate AI Hentai for free.

Hot Article

Hot Tools

Notepad++7.3.1
Easy-to-use and free code editor

SublimeText3 Chinese version
Chinese version, very easy to use

Zend Studio 13.0.1
Powerful PHP integrated development environment

Dreamweaver CS6
Visual web development tools

SublimeText3 Mac version
God-level code editing software (SublimeText3)

Hot Topics

Many Mac users tend to keep the default name of their device and may never consider changing it. Many people choose to stick with the name from the initial setup, such as "Johnny's MacBook Air" or simply "iMac." Learning how to change the name of your Mac is a very useful skill, especially when you have multiple devices, as it can help you quickly distinguish and manage them. Next, we will teach you step by step how to change the computer name, host name and Bonjour name (local host name) in macOS system. Why should you change your Mac name? Changing the name of your Mac can not only show your personality, but also help improve the user experience: Personalize your Mac: The default name may not be to your taste, change it to a name you like.

CrystalDiskMark is a small HDD benchmark tool for hard drives that quickly measures sequential and random read/write speeds. Next, let the editor introduce CrystalDiskMark to you and how to use crystaldiskmark~ 1. Introduction to CrystalDiskMark CrystalDiskMark is a widely used disk performance testing tool used to evaluate the read and write speed and performance of mechanical hard drives and solid-state drives (SSD). Random I/O performance. It is a free Windows application and provides a user-friendly interface and various test modes to evaluate different aspects of hard drive performance and is widely used in hardware reviews

1. Swipe up at the bottom of the screen to bring up the control center, as shown below. Click the Bluetooth switch to turn on Bluetooth. 2. We can connect to other paired Bluetooth devices or click [Search Bluetooth Device] to connect to a new Bluetooth device. Remember to turn on [Detectability] when you want other friends to search for your phone and connect to Bluetooth. Switch. Method 2. 1. Enter the mobile phone desktop, find and open settings. 2. Pull down the [Settings] directory to find [More Settings] and click to enter. 3. Click to open [Bluetooth] and turn on the Bluetooth switch to turn on Bluetooth.

CrystalDiskInfo is a software used to check computer hardware devices. In this software, we can check our own computer hardware, such as reading speed, transmission mode, interface, etc.! So in addition to these functions, how to use CrystalDiskInfo and what exactly is CrystalDiskInfo? Let me sort it out for you! 1. The Origin of CrystalDiskInfo As one of the three major components of a computer host, a solid-state drive is the storage medium of a computer and is responsible for computer data storage. A good solid-state drive can speed up file reading and affect consumer experience. When consumers receive new devices, they can use third-party software or other SSDs to

Harry Potter: Magic Awakening has recently added a spell exchange function, which requires players to use Bluetooth or WiFi to exchange spells. Some players find that they cannot use Bluetooth exchange, so how can they use Bluetooth to exchange spells? ? Next, the editor will bring you a solution to the problem that Harry Potter spells cannot be exchanged using Bluetooth. I hope it can help you. Solution to Harry Potter Spell Exchange Not Using Bluetooth 1. First, players need to find the Spell Exchange in the library, and then they can use Bluetooth or WiFi to exchange. 2. Click Use Bluetooth, and it prompts that you need to download a new installation package, but it has been downloaded before, and some players become confused. 3. In fact, players can download the new installation package by going to the store. For ios, they can go to the Apple store to update. For Android, they can download it.

Recently, some friends have consulted the editor about how to set up WeChat Mac to automatically convert voice messages into text. The following is a method for setting up WeChat Mac to automatically convert voice messages into text. Friends in need can come and learn more. Step 1: First, open the Mac version of WeChat. As shown in the picture: Step 2: Next, click "Settings". As shown in the picture: Step 3: Then, click "General". As shown in the picture: Step 4: Then check the option "Automatically convert voice messages in chat to text". As shown in the picture: Step 5: Finally, close the window. As shown in the picture:

When we use the Edge browser, sometimes incompatible software attempts to be loaded together, so what is going on? Let this site carefully introduce to users how to solve the problem of trying to load incompatible software with Edge. How to solve an incompatible software trying to load with Edge Solution 1: Search IE in the start menu and access it directly with IE. Solution 2: Note: Modifying the registry may cause system failure, so operate with caution. Modify registry parameters. 1. Enter regedit during operation. 2. Find the path\HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Micros

By default, iPhone takes photos from the camera in HEIC format. HEIC stands for High Efficiency Image Container and can hold more pixel data than PNG or JPG files, taking up significantly less space on iPhone storage compared to other formats. These files work best on iPhones but are not widely accepted on the internet because they often result in blurry/grainy pictures when you share them with non-Apple devices. To ensure that HEIC images are compatible on other devices, you may need to convert them to JPG format. This article will introduce how to convert HEIC images to JPG on Mac. How to Convert HEIC Photos to JPG on Mac [3 Methods] Method