How long does it take for the refrigerator to be plugged in after washing?
The refrigerator can be plugged in 5 minutes after cleaning. After plugging in, let the refrigerator run for about 1 hour, check whether the temperature inside has dropped, and then put food in. When placing the refrigerator, avoid direct sunlight, and it should be beneficial Ventilate to dissipate heat. Check its tightness frequently to avoid increased power consumption due to sealing problems.
#The operating environment of this article: Windows 10 system, dell g3 computer.
If the refrigerator is not cleaned for a long time, a layer of frost may form in the freezer area. This frost will affect the normal freezing and fresh-keeping function of the refrigerator, and may also cause the refrigerator to consume more power. etc. For this reason, the refrigerator should be cleaned every three months in life. After the refrigerator is cleaned, it cannot be plugged in immediately. Instead, you need to wait for the refrigerator motor to recover before powering on. This can also extend the life of the refrigerator motor.
The refrigerator can be plugged in 5 minutes after cleaning. After plugging in, let the refrigerator run for about 1 hour, check whether the temperature inside has dropped, and then put food in. When placing the refrigerator, avoid direct sunlight and allow ventilation to dissipate heat. Check its tightness frequently to avoid increased power consumption due to sealing problems. Defrost regularly. Failure to defrost regularly will affect its cooling effect.
Expansion:
Refrigerator cleaning method:
1. Before cleaning the refrigerator, cut off the power supply to the refrigerator. Take out the food from the refrigerator.
2. Then take out the shelves, fruit and vegetable boxes, and bottle frames from the refrigerator compartment. Note that these are fragile objects, so be careful. Use a rag dipped in water mixed with dish soap to scrub the accessories. After cleaning, dry them with a rag, or place them in a ventilated and dry place and let them dry naturally. The drawers in the freezer are pulled out one after another, and the frozen food does not need to be taken out.
3. Let the freezer defrost naturally. Remember to put some towels under the refrigerator and let the defrost water flow out to wet the floor.
4. First clean the outer shell and door of the refrigerator. Wipe the outer shell and handle of the refrigerator with a slightly damp and soft cloth. If there are more oil stains, you can dip them in some dish soap and scrub them for better results.
5. Dip a soft cloth in water or dish soap, gently scrub the refrigerated liner, then dip it in water and wipe off the dish soap. When cleaning the "switches", "lights" and "thermostat controller" of the refrigerator, please wring the rag or sponge dry.
6. If the ice in the freezer has melted, you can wipe it clean with a towel. Do not use sharp objects to shovel the ice on the freezer evaporator plate. This can easily damage the evaporator and cause refrigerator failure. After cleaning, open the door and let the refrigerator air dry naturally.
7. After cleaning the liner in the refrigerator and freezer, clean the refrigerator door liner. Refrigerator door seals are all removable. When removing the door seal, do not pull violently to avoid damaging the door seal. Wipe the door seal with 1:1 vinegar and water, and the disinfection effect is also very good.
8. Use a soft brush to clean the ventilation grille on the back of the refrigerator, and wipe it clean with a dry soft cloth or towel.
9. After cleaning, plug in the power and check whether the temperature controller is set to the correct position.
10. Run the refrigerator for about 1 hour, check whether the temperature in the refrigerator has dropped, and then put the food in the refrigerator. At this time, the refrigerator cleaning is completed.
The above is the detailed content of How long does it take for the refrigerator to be plugged in after washing?. For more information, please follow other related articles on the PHP Chinese website!

Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

AI Hentai Generator
Generate AI Hentai for free.

Hot Article

Hot Tools

Notepad++7.3.1
Easy-to-use and free code editor

SublimeText3 Chinese version
Chinese version, very easy to use

Zend Studio 13.0.1
Powerful PHP integrated development environment

Dreamweaver CS6
Visual web development tools

SublimeText3 Mac version
God-level code editing software (SublimeText3)

Hot Topics

The differences between first-level energy efficiency and second-level energy efficiency refrigerators are energy efficiency level, energy saving degree, price, service life and environmental protection performance. Detailed introduction: 1. Energy efficiency level. The energy efficiency level of a first-level energy-efficiency refrigerator is above 3.5, which means that the energy-saving effect of the refrigerator is very good. It can better realize the cooling and heat preservation functions during operation and reduce energy consumption. The energy efficiency of a second-level energy-efficiency refrigerator The level is between 3.2-3.49, and the energy-saving effect is relatively good, but there is still a certain gap compared with the first-level energy-efficiency refrigerator; 2. Energy-saving degree, the energy-efficiency level directly determines the energy-saving degree of the refrigerator, etc.

The refrigerator can be plugged in 5 minutes after cleaning. After plugging in, let the refrigerator run for about 1 hour, check whether the temperature inside has dropped, and then put food in. When placing the refrigerator, avoid direct sunlight and allow ventilation to dissipate heat. Check its tightness frequently to avoid increased power consumption due to sealing problems.

The refrigerator can be powered on 4 to 6 hours after cleaning. Details: 1. Open the door and drawer of the refrigerator to allow air circulation; 2. Use a clean towel or paper towel to wipe the internal and external surfaces of the refrigerator to absorb excess moisture; 3. Place the refrigerator in a well-ventilated place away from direct sunlight to promote the drying process; 4. After cleaning, you can use some special detergent or disinfectant to wipe the inside of the refrigerator to kill bacteria and maintain hygiene.

1. Drainage pipes are blocked: The refrigerator will produce condensation water during operation. If the drainage pipes are clogged or bent too much, the water will not be discharged normally and cause water leakage. Solution: Clean and unclog the refrigerator drain pipe to ensure that water can drain properly. 2. Refrigerator sealing problem: If the sealing strip of the refrigerator door is aged or damaged, it will easily cause the air-conditioning to leak out, causing the temperature inside the refrigerator to drop, resulting in condensation water and further water leakage. Solution: Check and replace the sealing strip of the refrigerator door to ensure that the refrigerator door can be completely sealed. 3. The refrigerator water tank or water pipe is leaking: inside the refrigerator

1. Check whether the power supply of the refrigerator is connected properly and make sure the socket is working properly. 2. Check whether the temperature regulator of the refrigerator is set correctly. It may be that the temperature regulator is set too low or there is a temperature sensor failure inside the refrigerator. 3. Check whether the condenser of the refrigerator is clean. If there is dust or dirt on the condenser, it will affect the cooling effect. 4. It is also possible that the refrigerator has insufficient refrigerant, and you need to contact professional maintenance personnel to add it. 5. If the above methods do not solve the problem, it is recommended that the user contact the refrigerator’s after-sales service center or professional maintenance personnel for repair.

As one of the indispensable appliances in modern households, the quality and performance of refrigerators are crucial to our daily lives. As one of the well-known brands on the market, Skyworth refrigerators have attracted much attention from consumers. This article will introduce the advantages of Skyworth refrigerators and whether it is suitable for your family in terms of user feedback, functional features, energy consumption performance, etc. 1. Appearance design 1. Skyworth refrigerator adopts a modern and simple appearance design with smooth lines. The outer shell is made of high-quality materials, which is durable and beautiful. 2. Skyworth refrigerators provide a variety of color options, which can be matched according to the home decoration style to create a harmonious and unified home atmosphere. 2. Capacity and space utilization 1. Skyworth refrigerators provide a variety of capacity specifications to meet the needs of different families. Available from small single units to large families

1. First, cut off the power and unplug the power cord, and then wipe away the accumulated water with a towel or absorbent sponge. 2. Use cotton swabs or air jet cans to clean away the dust and debris around the drainage holes. You can use vinegar water or soapy water to clean them. 3. Be careful not to use irritating cleaning agents such as strong acid or strong alkali to avoid damaging the internal parts of the refrigerator. 4. If the drain hole is still blocked, you can try heating it with pipe cleaner or soapy water, and then clean it with a cotton swab or soft brush. 5. It is recommended to clean the drain hole once a week to keep it clear.

The refrigerator can be de-iced with hot water. Using hot water for de-icing can speed up the de-icing process inside the refrigerator. The temperature of hot water is higher than that of cold water, which can melt the ice and frost inside the refrigerator faster. This is suitable for those who need to clean the refrigerator quickly. The situation was very helpful. Using hot water to de-ice can reduce the amount of frost inside the refrigerator. Frost is caused by water vapor condensing into ice when the cold air comes into contact with the outside air inside the refrigerator. Using hot water to de-ice can quickly melt the frost, thereby reducing the risk of frost formation. As frost accumulates, be careful when handling to avoid burning yourself.