What should I do if I need to press F1 to enter Windows 7?

What should I do if I need to press f1 to enter win7? When many friends use win7 system, they will find that they always have to press f1 to enter when booting up. What should I do? There are many reasons that may cause this situation, but if it is not dealt with in time, not only It will greatly extend the boot time, and may also damage other systems of the computer, which will greatly affect our normal use. Below, the editor will bring you Win7 needs to press F1 to start the solution.

You need to press f1 to enter the solution when booting win7

Situation 1. The system hard disk is damaged. When the system prompts "3rd Master HardDisk: S.M.A.R.T. Status BAD Backup and Replace", the system detects that the computer's third hard drive is damaged, and backs up important data in a timely manner. If the problem is not solved, it will prompt you to press F1 to continue.

Solution Solution: Solve the problem by installing the non-primary hard drive to another computer and exporting the data, and then replacing or repairing the hard drive.

Case 2: The computer does not have a floppy drive, and the BIOS detects the floppy drive option. The floppy drive will be automatically detected during boot. If the BIOS cannot detect the floppy drive, press F1 to continue; the floppy drive is named Floppy in the BIOS, or the default Drive.A is the floppy drive.

Solution: Press the Del key to enter the BIOS settings when booting, usually in the first setting, look for Drive A or Drive B. Press PgUp or PgDn on the keyboard to adjust, set to "None" to not detect, or find the option about "Floppy", set this option to "None" to not detect, and then press F10 on the keyboard (save and exit) , select Yes, and the problem will be solved after the computer restarts.

Situation 3: The motherboard battery is insufficient or damaged. The motherboard battery is used to ensure power supply to the motherboard BIOS when the computer loses power and save the user's BIOS setting information. If the motherboard battery is insufficient or damaged, the system will prompt an Alert ; System battery voltage is low (battery power is low) solution or prompt "CMOS battery failed" (battery failure), if there is no solution, you will be prompted to press F1 to continue. This is to ensure that the BIOS information will not be lost.

Solution: Make sure it is not caused by damage to the motherboard After it cannot be charged, replace the motherboard BIOS battery.

The above is the entire content of What should I do if I need to press f1 to enter when I start win7? I need to press f1 to enter the solution when I start win7, and more For related information, please pay attention to this site.

The above is the detailed content of What should I do if I need to press F1 to enter Windows 7?. For more information, please follow other related articles on the PHP Chinese website!