How to set the mtu value in Win10 system? How to set the mtu value in Win10 system? MTU is the largest transmission unit. Setting the mtu value too large or too small will affect the Internet speed to a certain extent, so we need to set the appropriate mtu value. , can make the network speed the fastest. Recently, a win10 system user wanted to set the mtu value, but did not know how to do it. He was very distressed about this. So how to set the mtu value in win10 system? The editor below will bring it to you Let’s take a look at the steps to set the mtu value in the Win10 system!
1. What is the mtu value?
mtu is the abbreviation of Maximum Transmission Unit. The Chinese translation is the maximum transmission unit, which refers to the maximum data packet size (in bytes) that can pass through a certain layer of a communication protocol. The maximum transmission unit parameter is usually related to the communication interface (network interface card, serial port, etc.).
2. How to set the mtu value in Win10
1. Right-click on the start menu and select [Command Prompt (Administrator)];
2. In the command prompt, enter: netsh interface ipv4 show subinterfaces, press the Enter key to view the current mtu value;
3. Then enter it in the following format: netsh interface ipv4 set subinterface "connection name" mtu=value store=persistent (for example: netsh interface ipv4 set subinterface "WLAN" mtu=1492 store=persistent). Press the Enter key and "OK" appears. ”The prompt indicates that the modification is completed.
The above is the detailed content of How to set mtu value in Win10 system?. For more information, please follow other related articles on the PHP Chinese website!