How to configure a network printer on Linux

How to configure a network printer on Linux

For users who need to use a network printer on a Linux operating system, it is very important to configure the network printer correctly. This article will show you how to configure a network printer on Linux, as well as provide some sample code to help you set it up.

Step 1: Preparation

Before you start configuring the network printer, you need to ensure that the printer driver has been installed on your Linux operating system. Please note that different printers may require different drivers, so you need to determine your printer model in advance and download the corresponding driver.

Step 2: Find the printer IP address

To configure a network printer, first you need to find the printer’s IP address. You can find this information through the printer's control panel or the configuration page of the printer itself. Typically, a printer's IP address ends with the printer make and model, such as 192.168.1.100.

Step Three: Install the Printer Driver

Once you have found the IP address of the printer, you can start installing the printer driver. Below are installation examples on two commonly used Linux distributions.

On Ubuntu, you can install the Canon printer driver using the following command:

sudo apt-get install cnijfilter-ip2700series

On Fedora, you can install the HP printer driver using the following command:

sudo dnf install hplip

Please note that this is only a sample command and the exact driver name may vary. You can modify the above commands according to your printer model and Linux distribution.

Step 4: Configure the network printer

Once you have installed the printer driver, you can use the system setup tool to configure the network printer. Below are examples on Ubuntu and Fedora.

On Ubuntu, you can follow these steps:

1. Click on the "System Settings" icon and select "Printers".
2. Click the "Add" button and select "Network Printer".
3. Enter the printer’s IP address and select the correct driver.
4. Click the "Apply" button to complete the configuration.

On Fedora, you can follow these steps:

1. Click the "Settings" icon and select "Printers".
2. Click the "Add" button and select "Network Printer".
3. Enter the printer’s IP address and select the correct driver.
4. Click the "Apply" button to complete the configuration.

Step Five: Test the Printer

Once you have completed the configuration, you can try printing a test page to make sure the printer is working properly. The following is an example of a simple command that you can execute in the terminal to test the printer:

echo "This is a test page." | lpr

Please note that this command will send a simple text message to the printer to test the printing functionality. You can modify the text message as needed.

Summary

By correctly configuring a network printer, you can successfully use the printer on a Linux operating system. This article provides sample code for installing the driver and configuring the printer to help you complete the setup smoothly. Keep in mind that the specific commands and steps may vary depending on your printer model and Linux distribution.

The above is the detailed content of How to configure a network printer on Linux. For more information, please follow other related articles on the PHP Chinese website!