Page 192.168.1.1 cannot be opened in win7 system
When configuring the router in Win7 system, sometimes the 192.168.1.1 login page cannot be opened. Why can't the 192.168.1.1 page in Win7 system be opened? what is the reason? The WEB server of the router itself is faulty. Communication cannot be established between the Windows 7 computer and the router, resulting in the 192.168.1.1.1 login page not opening.
Win7 system 192.168.1.1 page cannot be opened. What’s going on:
1. The network cable connecting the router and Windows 7 computer is not inserted correctly.
2. Router DHCP server and other issues.
3. There is a problem with the local connection configuration in the Windows 7 computer.
So, you must first determine whether it is a WEB failure of the router or a network communication problem. If it is a network communication problem, you need to further determine what is causing it. As long as the root cause of the fault is resolved, you can access the 192.168.1.1 page to open the router.
Determine the cause of the fault:
The network error command ping192.168.1.1 is needed here. Just run this command under the cmd program under Windows 7 system, and you can judge based on the running results. Is it a problem with the router's WEB server or a network communication problem?
Open the cmd program. Method: Click the Start menu button of Windows 7, enter cmd in the operation box and return to the vehicle.
Execute the ping 192.168.1.1 command in the command prompt (cmd). Method: Enter ping192.168.1.1 directly into cmd, then press Enter, and determine where it is based on the Enter result.
There are two results after running ping192.168.1.1: success and failure. If the ping is successful, it means that the failure to open the 192.168.1.1 page may be caused by a failure of the router's WEB server. The solution is to contact the merchant you purchased from for a return or repair.
The reason for ping failure cannot be determined directly and needs to be further eliminated.
The method is as follows:
Check whether the network cable connection is correct.
You need to plug the LAN interface of the router into any available interface of the router, and observe the indicator lights on the corresponding interface. Is the indicator light of the Internet cable interface of the Windows 7 computer on? Only when the indicator light is on (flashing), it is in a normal state. If it does not light up, it means there is a problem with the connection. Please replace the network cable and reconnect. If the network cable is connected normally, but the 192.168.1.1 page still cannot be opened, it means the local connection configuration in the Windows 7 system or the router DHCP server.
Reconfigure local area connection in Windows7.
Right-click the network and select Properties.
2. Click Change Adapter Settings.
Right-click the local connection and select Properties.
Select Internet Protocol version 4 (TCP/IPv4) and click Properties.
5. Check the Obtain IP address and DNS server address automatically option - click OK.
The above are the reasons and solutions for why the 192.168.1.1 page cannot be opened. If it still cannot be turned on, the router may be damaged and needs to be replaced with a new one.
The above is the detailed content of Page 192.168.1.1 cannot be opened in win7 system. For more information, please follow other related articles on the PHP Chinese website!

Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

AI Hentai Generator
Generate AI Hentai for free.

Hot Article

Hot Tools

Notepad++7.3.1
Easy-to-use and free code editor

SublimeText3 Chinese version
Chinese version, very easy to use

Zend Studio 13.0.1
Powerful PHP integrated development environment

Dreamweaver CS6
Visual web development tools

SublimeText3 Mac version
God-level code editing software (SublimeText3)

Hot Topics

Windows 11, as the latest operating system launched by Microsoft, is deeply loved by users. In the process of using Windows 11, sometimes we need to obtain system administrator rights in order to perform some operations that require permissions. Next, we will introduce in detail the steps to obtain system administrator rights in Windows 11. The first step is to click "Start Menu". You can see the Windows icon in the lower left corner. Click the icon to open the "Start Menu". In the second step, find and click "

The win7 system is a very excellent high-performance system. During the continuous use of win7, many friends are asking how to initialize the computer in win7! Today, the editor will bring you how to restore the factory settings of a win7 computer. Related information on how to initialize the computer in win7: Detailed instructions with pictures and text. Steps: 1. Open the "Start Menu" and enter. 2. Click to enter the settings at the bottom of the left side. 3. In the Win10 update and recovery settings interface, select. 4. Click below "Remove all content and reinstall Windows". 5. You can see the following "Initialization" settings, and then click. 6. Enter the "Your computer has multiple drives" setting option. There are two options here, you can choose according to the situation.

When we use the win10 operating system, in some cases we may need to delete the language pack in the system. At this time, just find the language option first, then choose to add a language pack. During this process, uncheck the language pack to be deleted and then delete it. How to delete the installed language pack in win10 system: 1. Use win+i to open settings and find the time and language options. 2. Select the "Language" option in the time and language options. 3. Select "Add Language" and go to the next step. 4. Uncheck the language pack when adding a language. After the addition is completed, you can download the language pack and voice pack separately;

Many friends may not be used to the win system when they first come into contact with it. There are dual systems in the computer. At this time, you can actually switch between the two systems. Let's take a look at the detailed steps for switching between the two systems. How to switch between two systems in win10 system 1. Shortcut key switching 1. Press the "win" + "R" keys to open Run 2. Enter "msconfig" in the run box and click "OK" 3. In the open "System Configuration" In the interface, select the system you need and click "Set as Default". After completion, "Restart" can complete the switch. Method 2. Select switch when booting 1. When you have dual systems, a selection operation interface will appear when booting. You can use the keyboard " Up and down keys to select the system

When we use the win7 operating system, we will inevitably encounter situations that require us to reinstall the system. So for the question of how to install the win7 system on an Android phone to a computer, the editor thinks that we first need to install a relevant emulator software on our phone, and then download the required operating system to our phone, and connect it to the computer to install it. operate. Let’s take a look at how the editor did it for detailed steps~ How to install win7 system on an Android phone on a computer 1. First download and install DriverDroid, and then set it up according to the setup wizard after running it. 2. Then note that the Android phone has obtained ROOT and needs to be connected to a computer during setup. 3. Move the bios file automatically downloaded by the phone to the image root directory (phone memory/D

How to display file suffix under Win11 system? Detailed explanation: In the Windows 11 operating system, the file suffix refers to the dot after the file name and the characters after it, which is used to indicate the type of file. By default, the Windows 11 system hides the suffix of the file, so that you can only see the name of the file in the file explorer but cannot intuitively understand the file type. However, for some users, displaying file suffixes is necessary because it helps them better identify file types and perform related operations.

Many friends will find that when using win11 system, there is a recommended item in the start menu, which occupies the lower part of the start menu, and the recommended items are basically all that we do not need to use, which is very troublesome. Recently, Microsoft stated that this feature will be hidden in the future. Let’s take a look at the specific situation. The win11 start menu will be able to hide recommended items 1. We can see that when the start menu is clicked, more than 30% of the space below the start menu is occupied by this "recommended item". 2. In the feedback center of win11, there are 8462 proposals for hiding recommended items, indicating that a large number of users request this feature. 3. According to foreign media reports, Microsoft is considering opening hidden recommended projects

Recently, some friends reported that their win10 system crashed and could not be booted into safe mode to repair the system. What should I do? In fact, we can download a new system and install it using a CD. Today, the editor has brought detailed steps to solve the problem. , let’s take a look at the details together. Steps to reinstall the win10 system with a CD: 1. Insert the win10 CD, restart the computer, press F12, F11, Esc and other shortcut keys, select the DVD option, and press Enter. 2. When this interface appears, press any key to boot from CD or DVD; 3. Boot from the CD and enter the win10 installation interface, select language, input method, and confirm. 4. In this interface, directly click "Install Now" 5. When prompted to enter the product key, select Skip. 6. Select the version of the installation system