If the router is broken but the cat is not broken, can I access the Internet?
If the router is broken, the cat can still access the Internet.
#In recent years, with the popularity of the Internet and the digitization of life, routers in the home have become an indispensable part of our daily lives. When this little device suddenly breaks, it's natural to worry about whether we can continue to surf the Internet. So here comes the question: If the router is broken, but the cat (cable modem) is not broken, can we still continue to surf the Internet?
In order to answer this question, first we need to understand the basic components of the home network. Home networks typically consist of cable/fiber optics running into the home and then connected to the router via a single network cable. Routers are responsible for extending network connectivity to various devices in the home, such as computers, mobile phones, and smart appliances. When the router fails, we should first confirm whether the modem is still working normally.
If it is just the router that is the problem, and the modem is still working normally, then the answer is yes - we can still continue to surf the Internet. However, we may be subject to some restrictions. In this case, we can directly connect the computer to the cat using a network cable to obtain a network connection. We can use a cable called a "network cable" to achieve this connection by plugging one end into the cat's network port and the other end into the computer's network port. At this time, the cat will act as a router, extending the network connection to the computer.
However, this connection method may not be convenient for some devices. For example, when we use mobile devices such as phones or tablets, we usually tend to use wireless network connections. Without a router we will not be able to use wireless networks. However, we can use cats’ wired connectivity to keep devices like phones and tablets online. We can connect the cat's network cable to a wireless router and use the wireless network in the area where the cat is.
In addition, we can also consider using the personal hotspot function of the mobile phone to continue surfing the Internet. A personal hotspot converts your phone's data connection into a small wireless network that can be used by other devices. Without a router, we can turn on the personal hotspot function of the phone and connect other devices to the phone's hotspot network. In this way, we can still continue to surf the Internet through our mobile phones.
However, it should be noted that using the personal hotspot function of the mobile phone may result in additional charges, especially if our mobile phone data traffic is limited. Before using the personal hotspot function, we should confirm the relevant charges and data limits with our mobile phone carrier.
To sum up, when the router is broken but the cat is not broken, we still have several ways to continue surfing the Internet. We can extend network connectivity to our devices by connecting directly to the cat using a network cable or using the cat's wired connection feature to connect to a wireless router. In addition, we can also consider using the personal hotspot function of the mobile phone to continue surfing the Internet, but we need to pay attention to the possible additional charges and traffic restrictions. No matter which method we choose, the key to staying connected is to make sure the cat is still working .
The above is the detailed content of If the router is broken but the cat is not broken, can I access the Internet?. For more information, please follow other related articles on the PHP Chinese website!

Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

AI Hentai Generator
Generate AI Hentai for free.

Hot Article

Hot Tools

Notepad++7.3.1
Easy-to-use and free code editor

SublimeText3 Chinese version
Chinese version, very easy to use

Zend Studio 13.0.1
Powerful PHP integrated development environment

Dreamweaver CS6
Visual web development tools

SublimeText3 Mac version
God-level code editing software (SublimeText3)

Hot Topics



The sys of the router means system operating status indication, and the full name is System; the router uses the sys indicator light to inform the user of the operating status of the device. If the router is faulty or restarting, the indicator light will flash; the indicator light of the router can be divided into power Indicator light, sys system indicator light, LAN indicator light and WAN indicator light.

How to connect the optical modem to the wireless router: 1. Connect the LAN port of the optical modem to the WLAN port of the router; 2. Use a toothpick or needle to poke the reset button of the router; 3. There is usually a management page on the back of the router, such as The one on the router is tplolgin.cn. Enter this address in the browser. If it does not exist, enter 192.168.1.1. This is the default address of the router. 4. Enter the management page. You will first be asked to set the administrator password. Set it up. You can enter the router settings and so on.

Can. However, you need to pay attention to some issues: 1. Placing the router upside down may have a certain impact on heat dissipation, causing heat to accumulate at the bottom of the router, affecting the heat dissipation effect. Long-term overheating may reduce the performance of the router and adversely affect its lifespan. ; 2. Placing the router upside down may affect the operation and management of the device, and the indicator lights and interfaces may be blocked or inconvenient to operate; 3. Placing the router upside down may also have a certain impact on network security, and the default user name and password may cause This information is more susceptible to prying eyes.

In routers, sn stands for "Serial Number", which means "serial number" and refers to the factory number of the router. The router serial number (SN) and physical address are both hardware identifiers, which are unique; the router will be under warranty only if the router's serial number is kept intact. The router serial number SN can be seen directly in the manual and on the back of the router.

Students who know computers all know that if our computer wants to connect to the network, it must have an IP address. This IP address can be manually configured, such as 172.16.19.20; it can also be automatically obtained by the DHCP server of the computer network card, such as 192.168.1.100 etc. These IP addresses are what we often call IPV4 addresses, and the corresponding IPV6 is also a type of IP address. What is IPV6 IPV6 is a new IP address that emerged in response to the exhaustion of IPV4 address resources. Its full name is "Internet Protocol Version 6", and its Chinese name is the sixth generation of Internet Protocol. The number of IPv6 addresses is theoretically 2^128

Optical modem refers to "optical modem", also known as "single-port optical terminal". It is a three-piece optical fiber transmission equipment developed for special user environments. This equipment uses large-scale integrated chips, with simple circuits and low power consumption. Low, high reliability, complete alarm status indication and complete network management functions.

The first light is on, indicating that the router is powered on. Which port is plugged in, the light of which port is on, and flashing means data is being transmitted. Wireless routers usually have three indicator lights: SYS, LAN and WAN. When the wireless router is powered on, the SYS light will light up. When the wireless router is connected to the network modem, the WAN light will light up. The LAN light corresponds to each interface of the wireless router. As long as the network cable is inserted into the corresponding interface, the corresponding LAN light will light up. 1. If it keeps flashing, it means it is transmitted by data, and the router settings should be normal. 2. If you have always been able to access the Internet, but you can't get online recently; it is probably a problem with the external line, that is, a problem with the operator (usually there is a problem with the line, causing the data signal to attenuate too much, although the line is good)

Reasons why the router is connected but cannot access the Internet: 1. Internet service provider problem; 2. Router setting problem; 3. LAN problem; 4. WiFi signal problem; 5. Router hardware problem; 6. DNS problem; 7. Network cache problem ; 8. Firewall and security software issues; 9. Operator restrictions; 10. Equipment failure. Detailed introduction: 1. Internet service provider problems. This is a common reason. Internet service providers may have problems, such as network interruption or service interruption; 2. Router setting problems, etc.