Standby is one of the most popular new features since the release of iOS 17. It makes it easy to view information on your iPhone thanks to magnified widgets, a dedicated photo screen, and a clock screen. You can then switch between widgets to view a variety of information, featured photos, and the time using your preferred clock.
Standby activates when iPhone is charging, idle, and placed in landscape mode. However, it's designed to turn off if you haven't used your phone for a while or aren't paying attention. But many users want to turn on standby indefinitely. If you're in the same boat, we have the perfect position for you. Here's how to keep Standby always on on your iPhone.
Here are all the ways you can enable Standby indefinitely on your iPhone. Here's how to help you through the process.
If you are using an iPhone 14 Pro or later, then make sure The best way to always enable standby on your iPhone is to enable standby. Please follow the steps below to help you through the process.
Open the "Settings" app on your iPhone and tap "Standby".
Now click and turn on the Always on toggle switch.
# Once enabled, you can plug your phone into the wall and put it in landscape mode for a while. Once it goes into standby, it won't be disabled until you decide to pick up the phone.
If you don’t have an iPhone 14 Pro or later, don’t worry, you can still use the shortcut to keep it enabled on your iPhone indefinitely Standby function. Please follow the steps below to help you through the process.
Access this link from your iPhone and you will be taken to the dedicated page for the shortcuts we wish to use in the Shortcuts app. Click Add shortcut at the bottom of the screen.
The shortcut will now be added to your application. Click 3 points (
Collection failed, please handle manuallyhttps://lh3.googleusercontent.com/M2CPWckrWvwxG_q9NAKz-Uf7e4ewXm5h2wGpck51i24wsz5XHkt2b-C824kEibMOh_s=w36-h36 ?width=200) The icon is the same.
Click to repeat 100 times next to . Click and hold the icon. This shortcut relies on repeating a StandBy loop that checks your attention. So we need to increase this number to about 500 or more so that the loop continues while active on the iPhone.
Now scroll down and make sure the time next toWait is 20 seconds. This is because the loop occurs every 20 seconds, so setting this value to 20 seconds will make the loop run continuously. If you increase this duration to around 25 seconds, the loop will stop after 20 seconds and start again after 5 seconds.
When finished, clickFinish in the upper right corner of the screen.
Now click on the shortcut to run it on your iPhone. You will now be prompted to allow the shortcut to display notifications. ClickAllow.
The shortcut will now run on your iPhone. You can now plug your phone into the wall and put it in landscape mode. Once you enter standby on your iPhone, it will be visible indefinitely. You'll see the standby screen flicker slightly each time the refresh cycle occurs. If you want to kill the shortcut, just turn the brightness to maximum. This will terminate the shortcut.
#This is how you can always activate the standby screen on your iPhone.
Wake to Motion is a feature of Standby that, once detected If you move, it will wake up the display. This helps turn off standby when you pick up your iPhone and unplug it from the wall. However, this feature is notoriously finicky and requires only a slight movement to activate. This can sometimes include your phone vibrating from incoming notifications, random movement, etc.
If despite using the above two tricks, you still find that StandBy is disabled on your iPhone, then we recommend that you disable Motion to Wake on your iPhone. You can do this by going to Standby>Settings>Night Mode>Wake to Motion.
If Low Power Mode is enabled, standby will not be triggered on the iPhone. So, if you find the standby feature deactivating on your iPhone after a few minutes, then we recommend you to check Low Power Mode and disable it if it is enabled on your iPhone. You can disable Low Power Mode using Control Center. Swipe down from the top right corner of the screen and tap the Low Power Mode module to disable it on your iPhone.
If this module is missing from your Control Center, you can disable low power mode by going to "Battery > Low Power Mode" Settings > consumption mode.
Sleep focus is another factor known to interfere with iPhone standby. If you have sleep focus mode enabled or scheduled on your device, then this is the reason why standby cannot stay active on your iPhone. If this is the case, then you can schedule Do Not Disturb on your iPhone using similar settings. Do Not Disturb StandBy, StandBy should stay on standby on your iPhone. To delete Sleep Focus Mode, go to Settings >Focus Mode>Sleep>Delete>DeleteDelete.
As mentioned in the previous section, Sleep Focus is known Will interfere with standby. In addition to the "Focus" section, "Sleep Focus" is also arranged in the "Health" App. If you use the Health app and schedule Sleep Focus Mode around your daily routine, it may also interfere with standby. We recommend you to check and disable the same feature if it is enabled in the Health app. Go to Health App > Browse > Sleep > Click Schedule and Options > Turn off sleep schedule .
Method 7: Make sure your iPhone is not lying flat on a surfaceNow, if you are still having issues keeping standby active on your iPhone, then it could be that you are not placing your iPhone Tilt to landscape mode. Although your iPhone may be in landscape mode if it is lying flat on a surface (either face down or face up), Standby will not activate on your iPhone. Therefore, we recommend that you keep your iPhone tilted in landscape mode to enable the standby feature on your iPhone.Faulty charger can also cause standby issues on your iPhone. iPhone chargers are known to be finicky over time. If your charger is randomly disconnecting due to damage or age, that may be why StandBy isn't staying active on your iPhone. Therefore, we recommend that you try a new or different charger to see if that solves the problem for you. If StandBy is facing issues due to a faulty charger, then a new charger should help resolve the issue.
Landscape mode can also randomly encounter issues on your iPhone, especially if you are running a beta version of iOS. You can check if landscape mode is working properly on your iPhone by turning off rotation lock on your iPhone from Control Center. After you've disabled rotation lock, go to the Photos app or another compatible app and try viewing the content in landscape mode. In most cases, if landscape mode is present on your iPhone, the photos will not conform to landscape mode.
If this is the case, then restarting your iPhone will resolve this issue. To restart your iPhone, press and release the Volume Up button, then press the Volume Down button. Once done, press and hold the power button on your iPhone. Use the slider to turn off your iPhone once it appears on the screen. Then, press and hold the power button again to turn on your iPhone. After the iPhone restarts, landscape mode should be enabled and standby should no longer cause problems on the iPhone.
The above is the detailed content of How to fix iOS 17 standby off issue: Always keep standby mode on. For more information, please follow other related articles on the PHP Chinese website!