Home Common Problem What should I do if Win10 is stuck on the welcome screen for a long time when booting?

What should I do if Win10 is stuck on the welcome screen for a long time when booting?

Oct 20, 2023 pm 03:30 PM
win10 win boot

The solutions to the problem that Win10 is stuck on the welcome interface for a long time include restarting the computer, checking the hardware, checking the driver, checking for viruses, restoring the system, reinstalling the system and checking BIOS settings, etc. Detailed introduction: 1. Restart the computer. First, you can try to restart the computer. Some temporary errors may occur during the operation of the computer. Restarting the computer can clear these errors and solve the problem. 2. Check the hardware. You can check the computer's memory, Check whether the hard disk, graphics card and other hardware are working normally. If there is any problem with the hardware, it is recommended to replace it in time; 3. Check the driver, etc.

What should I do if Win10 is stuck on the welcome screen for a long time when booting?

The operating system for this tutorial: Windows 10 system, DELL G3 computer.

When using the Windows 10 operating system, sometimes you may encounter a situation where the boot is stuck at the welcome interface for a long time. This may be due to system failure, driver issues, virus infection, etc. Below I'll walk you through some possible solutions.

1. Restart the computer: First, you can try to restart the computer. Sometimes, some temporary errors may occur while the computer is running. Restarting the computer can clear these errors and solve the problem.

2. Check the hardware: If the computer is stuck at the welcome interface after booting, it may be due to hardware failure. You can check whether your computer's memory, hard drive, graphics card and other hardware are working properly. If there is a problem with the hardware, it is recommended that you replace it in time.

3. Check the driver: The driver is the bridge between the computer hardware and the operating system. If there is a problem with the driver, the computer may not start normally. You can check whether your computer's drivers have been updated to the latest version. If there is a problem with the driver, it is recommended that you reinstall or update the driver.

4. Check for viruses: A computer infected by a virus may also cause the computer to be stuck at the welcome interface. You can use anti-virus software to perform a comprehensive scan on your computer to remove viruses. If a virus is found, it is recommended that you remove it promptly.

5. Restore the system: If none of the above methods can solve the problem, you can try to restore the system. In Windows 10, you can use the "Reset this PC" feature to restore your system. This feature will delete all user data and applications and restore the computer to factory settings. Before using this feature, it is recommended that you back up important data.

6. Reinstall the system: If the "Reset this PC" function cannot solve the problem, you may need to reinstall the system. Before reinstalling the system, it is recommended that you back up important data and ensure that your computer has sufficient storage space.

7. Check the BIOS settings: If the computer is stuck at the welcome interface after booting, it may be due to a BIOS setting problem. You can check the BIOS settings to make sure they are correct. If you find that there is a problem with the BIOS settings, it is recommended that you reset it.

To sum up, if the computer is stuck on the welcome interface after booting, it may be due to system failure, driver problems, virus infection, etc. You can try to solve the problem by restarting the computer, checking hardware, checking drivers, checking for viruses, restoring the system, reinstalling the system, checking BIOS settings, etc. Hope these solutions help you! If you have any further questions please feel free to let me know.

The above is the detailed content of What should I do if Win10 is stuck on the welcome screen for a long time when booting?. For more information, please follow other related articles on the PHP Chinese website!

Statement of this Website
The content of this article is voluntarily contributed by netizens, and the copyright belongs to the original author. This site does not assume corresponding legal responsibility. If you find any content suspected of plagiarism or infringement, please contact admin@php.cn

Hot AI Tools

Undresser.AI Undress

Undresser.AI Undress

AI-powered app for creating realistic nude photos

AI Clothes Remover

AI Clothes Remover

Online AI tool for removing clothes from photos.

Undress AI Tool

Undress AI Tool

Undress images for free

Clothoff.io

Clothoff.io

AI clothes remover

AI Hentai Generator

AI Hentai Generator

Generate AI Hentai for free.

Hot Article

R.E.P.O. Energy Crystals Explained and What They Do (Yellow Crystal)
3 weeks ago By 尊渡假赌尊渡假赌尊渡假赌
R.E.P.O. Best Graphic Settings
3 weeks ago By 尊渡假赌尊渡假赌尊渡假赌
R.E.P.O. How to Fix Audio if You Can't Hear Anyone
3 weeks ago By 尊渡假赌尊渡假赌尊渡假赌
WWE 2K25: How To Unlock Everything In MyRise
4 weeks ago By 尊渡假赌尊渡假赌尊渡假赌

Hot Tools

Notepad++7.3.1

Notepad++7.3.1

Easy-to-use and free code editor

SublimeText3 Chinese version

SublimeText3 Chinese version

Chinese version, very easy to use

Zend Studio 13.0.1

Zend Studio 13.0.1

Powerful PHP integrated development environment

Dreamweaver CS6

Dreamweaver CS6

Visual web development tools

SublimeText3 Mac version

SublimeText3 Mac version

God-level code editing software (SublimeText3)

System Restore prompts that you must enable system protection on this drive System Restore prompts that you must enable system protection on this drive Jun 19, 2024 pm 12:23 PM

The computer has a restore point, and when the system is restored, it prompts "You must enable system protection on this drive." This usually means that the system protection function is not turned on. System protection is a feature provided by the Windows operating system that can create system restore points to back up system files and settings. That way, if something goes wrong, you can revert to a previous state. When the system fails and you cannot enter the desktop to start it, you can only try the following method: Troubleshooting-Advanced Options-Command Prompt Command 1 netstartvssrstrui.exe/offline:C:\windows=active Command 2 cd%windir%\system32 \configrenSYSTEMsy

What should I do if win10 does not switch users? Win10 login interface does not have the option to switch users. Solution What should I do if win10 does not switch users? Win10 login interface does not have the option to switch users. Solution Jun 25, 2024 pm 05:21 PM

A problem that Windows 10 users may encounter is that they cannot find the switch user option on the login interface. So what should I do if there is no switch user option on the win10 login interface? Let this site give users a detailed explanation of the problem of not switching user options in the win10 login interface. Detailed solution to the problem of switching user options on the Win10 login interface: Check user account settings: First, make sure you have multiple user accounts on your computer and that these accounts are enabled. You can check and enable the account by following these steps: a. Press Win+I keys to open Settings and select "Accounts". b. Select "Family & Others" or &ld in the left navigation bar

How to permanently turn off real-time protection in win10? How to disable real-time protection function in win10 computer 0 How to permanently turn off real-time protection in win10? How to disable real-time protection function in win10 computer 0 Jun 05, 2024 pm 09:46 PM

Although the comprehensive anti-virus software that comes with Windows 10 system can continuously protect the security of your personal computer, sometimes it may also affect certain downloaded files. For some users, it may be more appropriate to temporarily turn off the real-time protection function. But many users don’t know how to permanently turn off the real-time protection feature on win10 system. 1. First, press the "Win+R" keys to open the run window, enter the "gpedit.msc" command to open the local Group Policy Editor interface; 2. Then, in the opened interface, click "Computer Configuration/Administrative Templates/ Windows Components/MicrosoftDef

How to restore the default wallpaper in win10? One trick to quickly restore the default wallpaper in Windows 10 system How to restore the default wallpaper in win10? One trick to quickly restore the default wallpaper in Windows 10 system Jun 02, 2024 pm 02:07 PM

In Windows 10 system, if you want to return to the system default wallpaper, you can follow the following steps: 1. Right-click a blank space on the desktop and select Personalize in the pop-up menu. 2. This will open the Personalization window in Settings. In the left menu, click Background. 3. Under the "Background" settings, find and click the drop-down menu next to "Choosepicture", and then select Windows Default (Windows Default) or directly select a picture that looks like the default wallpaper in the picture preview below ( if there are multiple options). 4. If your system has multiple versions

Windows cannot start the Windows Audio service Error 0x80070005 Windows cannot start the Windows Audio service Error 0x80070005 Jun 19, 2024 pm 01:08 PM

The guy's computer appears: Windows cannot start the WindowsAudio service (located on the local computer). Error 0x8007005: Access denied. This situation is usually caused by user permissions. You can try the following methods to fix it. Method 1: Modify the registry to add permissions through batch processing, create a new text document on the desktop, save it as .bat, and right-click the administrator to go far. Echo==========================EchoProcessingRegistryPermission.Pleasewait...Echo================== ========subinacl/subkey

What should I do if Win10 takes a screenshot and crashes? How to solve the problem of Win10 flashing and then disappearing after taking a screenshot? What should I do if Win10 takes a screenshot and crashes? How to solve the problem of Win10 flashing and then disappearing after taking a screenshot? Jun 02, 2024 pm 12:48 PM

There are many reasons why the screenshot disappears after taking a screenshot in Win10. Users can first check the screenshot save location or adjust the screenshot settings, or check the animation effect to check it. If it really doesn't work, you can also choose to update the driver and operating system to perform the operation. Let this website carefully introduce to users the analysis of the problem of Win10 disappearing after taking a screenshot. Analysis of the problem after win10 takes a picture and it flashes and disappears 1. Check where the screenshot is saved: When you use the Win+PrtSc (PrintScreen) key combination to take a screenshot, the screenshot is usually saved in the C:\Users\YourUsername\Pictures\Screenshots folder. please

What to do if the Win10 Task Manager crashes? How to fix the Win10 Task Manager crash? What to do if the Win10 Task Manager crashes? How to fix the Win10 Task Manager crash? Jun 25, 2024 pm 04:31 PM

Hello everyone, have you ever encountered the situation where the Windows 10 Task Manager keeps crashing? This function helps us a lot, allowing us to quickly see all running tasks, which is very convenient to use, right? However, some friends said that they encountered this problem and didn’t know how to solve it, so let me share with you the specific solution! Solution to Win10 Task Manager crash 1. First, press and hold the "Win" + "R" keys on the keyboard to open Run, enter "regedit" and press the Enter key. 2. Expand the folders and find "HKEY_CURRENT_USERSoftwareMicros

How to turn off popular searches in Windows 10 system? List of methods to close popular searches in Windows 10 system How to turn off popular searches in Windows 10 system? List of methods to close popular searches in Windows 10 system Jun 03, 2024 pm 08:46 PM

In win10 system, hot search is one of the more practical methods, but sometimes it can cause certain troubles. So how to turn off hot search? Let’s take a look below! Step 1: Open the Settings app First, click on the Windows icon in the lower left corner of the screen and select the Settings app. Step 2: Enter "Personalization" settings In the "Settings" app, click the "Personalization" option. Step 3: Select the “Search” option In the “Personalization” settings, select the “Search” option. Step 4: Turn off popular searches. In the "Search" option, find the option "Show popular searches in search" and turn it off. Professional Tool Recommendation 1. Xiaozhi Soso Xiaozhi Soso—Quick Search and One-Click Positioning—Professional Computer Search Tool