Adjust Win7 laptop headphone volume settings

How to set up the win7 laptop headset without sound

The first step is to troubleshoot the headset. There are two methods. The first is to use the headphones on other devices (other computers or MP3 players). If the headphones are normal, the problem is with the computer. The second method is to use other normal headphones to try on the computer to also determine whether the problem is on the computer.

The second step is to determine the driver installation status (hardware use requires driver support. Although the sound card driver is generally installed, it should be carefully eliminated in order to eliminate problems) and run software such as Driver Wizard or the driver detection function of security software. If the driver is not installed, install the updated driver. If it is already installed, proceed to the next step for troubleshooting.

The third step is to click on the control panel to enter the window device manager, and select sound and volume management in the device manager (by the way, check whether mute is turned on or the volume is too low)

The fourth step is to click on the headset device and view the device properties to see if the device is disabled. If the device is disabled then choose to enable the device.

Step 5: Problem Detection There may be a problem with the socket. Check the headset properties to see if the headset is plugged in. If not, the headset is not connected. Try turning the headset plug slowly to see if there is sound. If not, the socket may be broken. It is recommended to check it

The above describes common methods for notebooks. There is another method for desktop computers: desktop computers have two headphone jacks on the front and on the back. After troubleshooting according to the previous method, replace the front socket and try the rear one. If there is sound, the front one may be broken or disabled. If it is disabled, it still needs to be enabled in the device management (or in the device management of the audio driver)

What to do if there is no sound after the headphones are plugged into the computer in win7 system

There is no sound when headphones are plugged into the computer, which is very inconvenient for us to listen to music on the computer. However, there are several reasons why you can’t hear sound from your headphones. Anxia’s editor will help you find them out one by one!

What should I do if there is no sound after plugging the headphones into the win7 system? What to do if there is no sound after plugging the headphones into the computer? The first reason: the device has been disconnected

1. If there is no sound from the headphones, you can try this method first. Right-click the speaker in the system tray on the taskbar and select Playback Devices (P) from the shortcut menu.

2. Select the speaker in the sound window, select Set as default device from the right-click menu, and finally press the OK button.

【Warm Tips】If your headset and microphone are plugged into the front panel of the computer and the above settings do not work, you can select the Set as default communication device item again in the above window.

Second reason: Disable jack settings

If you encounter no sound from the front jack, but there is sound from the back jack, continue to learn more.

1. Realtek High Definition Audio Manager can be opened from the control panel.

2. Enter the Realtek High Definition Audio Manager interface and click Jack Settings.

3. Click to disable jack settings

The third reason: driver problem

If none of the above methods work, then there may be a driver problem. It is recommended to download the latest version of the driver wizard for recovery.

1. Open the driver wizard to detect it, and then restore it after detecting it.

Why is there no sound from the headphone jack of win7 computer

Solution to no sound when plugging in headphones in win7 system:

1. In fact, Windows 7 comes with a very good tool that can help you find and solve problems very conveniently. It can scan your computer and detect the root causes of common problems. This is the built-in system diagnostic tool. Open the Start menu and select Control Panel.

2. In System and Security, select Find and solve problems.

3. Open Hardware and Sound.

4. Under the sound options, select Play Audio; in the Play Audio dialog box, click Next.

5. In the fault dialog box, select Headphones and click Next; at this time, it will give diagnostic information: The peripheral is not plugged in; and give repair suggestions: plug in speakers or headphones.

6. At this time, if you plug in headphones or speakers and click the Next button, the system will automatically make changes and repairs, and give you the following dialog box.

7. If you do not plug in the headphones or speakers, click the Next button directly, and the system information will change to the following.

The above is the detailed content of Adjust Win7 laptop headphone volume settings. For more information, please follow other related articles on the PHP Chinese website!