How to set up a wireless router connection on a desktop computer

How to connect a wireless router to a desktop computer? How to set up

1. First, you need to connect the modem to the wireless router. First, connect one end of the network cable to the lan on the modem, and then connect the other end to the wan on the wireless router.

2. Take win7 as an example. First, click on Local Area Connection and then right-click on Properties.

3. Finally, scroll down in the interface that comes out, find an Internet protocol, and double-click it.

4. Then select all the automatically obtained buttons in the interface that comes out, and click OK after setting.

5. Then call your browser and enter 192.168.1.1. Then enter your account password. All are admins.

6. After entering, enter the interface of Swift Network and click the setup wizard on the left.

7. After clicking, in the interface that comes out, just click Next.

8. Click Next. In the interface that comes out, the default is to let the router choose the appropriate Internet access method. No changes are needed and you can go to the next step.

9. Then there will be a window to enter the account and password, which is the account and password given when installing the broadband. Enter it directly and click Next.

10. Then select what you need in the interface that comes out. Set the name and password of the router, and click Next after setting.

11. After clicking, an interface will appear to check the parameters you set. After confirming that they are correct, click the save button.

12. After saving, a setting status will appear, and you can check that the current settings are all correct. At this point, the wireless routing setting work is completed.

How to connect wireless network to computer

1. Add the MAC address of the wireless AP and the MAC address of the USB wireless network card to the allowed range of the unit's network routing (or set it in the network law enforcement officer software).

2. Set an IP address for the wireless AP in [LAN Port Settings], do not duplicate it with any other IP.

3. In the [WAN Port Settings] of the wireless AP, set the [WAN Port Connection Type] to [Dynamic IP], and leave the others blank.

4. On the computer with the USB wireless network card, set it an IP address that is not duplicated with other IPs, set the mask, gateway (here is the router gateway, not the wireless AP), DNS server (you can set the local ISP For accessed DNS, you can also use OPENDNS 208.67.222.222 and 208.67.220.220)

5. After setting up like this, the connection can usually be successful. If there are still problems, it may be a problem with your [Network Law Enforcement Officer]. It is recommended to turn off the Network Law Enforcement Officer before connecting to the wireless, and then turn it on after everything is resolved. If you still have problems, you can go into the overall routing settings of the entire unit and see if there are any restriction policies.

The above is the detailed content of How to set up a wireless router connection on a desktop computer. For more information, please follow other related articles on the PHP Chinese website!