Introduction: In this article, this site will introduce to you the relevant content about the version after the mac is restored to factory settings. I hope it will be helpful to you, let’s take a look.
1. Restoring factory settings will clear all data on your Mac and restore it to its original factory state, unless you Create a backup on your Mac before factory reset and restore it afterwards.
2. Yes, don’t worry about this. You can use the "MacOS X Utility" of the MacBook Air system to reinstall the system, that is, restore the factory settings. Or if it's within the warranty period, you can directly ask the staff of Apple's direct-operated store to redo the system for free.
3. Restoring the computer to factory settings does not require reinstalling the system. After the computer is restored to factory settings, the computer is restored to the original system, so there is no need to install the system again. .If the computer completes the factory settings normally, it will return to normal when you turn it on again. No need to reinstall the system.
4. Restoring the computer to factory settings does not mean reinstalling the system. The difference between the two is as follows: Different definitions (1) Restore factory settings: The factory settings are restored to the factory default state. (2) Reinstall the system: Reinstall the computer's operating system. unnecessary.
5. The computer will restart and perform necessary operations. Please wait patiently until the recovery is complete. Please note that a factory reset will return your computer to its original state, which means that all software and drivers you have previously installed will be removed. You may need to reinstall the software you need and perform system updates and settings.
The MacBook Pro cannot contact the recovery server because of a network failure. On a Mac with macOS Catalina 15, make sure your Mac is up to date.
Won't. Restore factory settings is to restore the device to its factory state, that is, the operating system version of the device is still the version before the device was restored to factory settings and will not be automatically upgraded to the latest version. Therefore, a factory reset will not restore the system.
Just frame the column, then use the right mouse button to select Unhide.
How to restore the factory system of Apple computer Mac Restart Mac After restarting Mac, press the keyboard option command R, as shown below: Wait until the small earth is displayed on the monitor, and then a countdown will appear. Just wait patiently.
1. Open the desktop program of Apple computer, click the launch pad at the bottom of the page to enter the page, and click other options. On other pages, click Disk Utility to enter. On the Disk Utility page, click Erase. In the dialog box, select Mac OS Extended (Journaled) as Format and click Erase.
2. First, press the power button on the Apple computer mac keyboard. Then on the keyboard, press the "cmmand r" keys simultaneously. Then in the Mac OS X utility interface, select the disk. Furthermore, in this interface, select the "Macintosh HD" option and click the "Erase" option on the right.
3. First, click the power button of the Macbook, and then press and hold the Command R key combination at the same time to load the automatic recovery function "MacOSX system" of Apple computers, as shown in the figure below. After backing up the computer data, restart the computer and press the command R key. Select the account for which you know the password and enter the password.
After backing up the computer data, restart the computer and press the command R key. Select the account for which you know the password and enter the password. Once logged into your account, select Disk Utility and click Continue. Select the first disk and select Erase in the upper right corner.
After restarting the Apple computer, press the keyboard option command R on the keyboard, as shown in the figure. After waiting for the monitor to display the small earth, a countdown will appear. According to the picture below, select "Disk Utility" in the opened interface.
First press the power button on the Apple computer mac keyboard. Then on the keyboard, press the "cmmand r" keys simultaneously. Then in the Mac OS X utility interface, select the disk. Furthermore, in this interface, select the "Macintosh HD" option and click the "Erase" option on the right.
The method to restore the factory settings of an Apple notebook is as follows: First turn on the power switch of the Mac and hold down the command R key to enter recovery mode, and you will see the MacOSX utility tool.
Step One: Erase your startup disk Insert mac os x install dvd into the optical drive and restart your computer. Hold down the option key while your computer starts. Select "mac os x install dvd" and click the arrow below it to boot from the dvd installation disc.
The method to restore MacBookpro to factory settings is as follows: Computer: MacBookpro System: OSX 9. Press and hold the Option Command R key when booting, and then the computer will enter the network recovery state. After entering the page, we first restore the system in the main disk Wipe off the disk.
Click the power button of the Macbook and hold down the Command R key combination at the same time. This operation will load the automatic recovery function of Apple notebook. After performing the above operations, the dialog box as shown in the figure will pop up. Select DiskUtility and click Continue.
How to restore the factory system of Apple computer Mac Restart Mac After restarting Mac, press the keyboard option command R, as shown below: Wait until the small earth is displayed on the monitor, and then a countdown will appear. Just wait patiently.
First, click the power button of the Macbook, and then press and hold the Command R key combination at the same time to load the automatic recovery function "MacOSX system" of Apple computers, as shown in the figure below. After backing up the computer data, restart the computer and press the command R key. Select the account for which you know the password and enter the password.
First, click the power button of the Macbook, and then hold down the Command R key combination at the same time to load the automatic recovery function "Mac OS X system" of Apple computers, as shown in the figure below.
The specific method is as follows: Click the power button of the Macbook and hold down the Command R key combination at the same time. This operation will load the automatic recovery function of the Apple notebook. After performing the above operations, the dialog box as shown in the figure will pop up. Select Disk Utility and click Continue.
How to restore the factory system of Apple notebook: Tools/materials: Apple macbook pro, Apple system 12. Method/step: Restart the computer. After backing up the computer data, press the command R key while restarting the computer. login account. Select the account for which you know the password and enter the password. Select Disk Utility.
After backing up computer data, restart the computer and press the command R key. Select the account for which you know the password and enter the password. Once logged into your account, select Disk Utility and click Continue. Select the first disk and select Erase in the upper right corner.
The method to restore the factory settings of an Apple notebook is as follows: First turn on the power switch of the Mac and hold down the command R key to enter recovery mode, and you will see the MacOSX utility tool.
The "Installation Successful" screen will be displayed. That’s it for now! You can click Restart. After the restart is complete, a "Welcome" video will be played, and then the "Country/Region Selection" screen will appear to complete the "mac os x Setup Assistant" step-by-step operation.
First, click the power button of the Macbook, and then hold down the Command R key combination at the same time to load the automatic recovery function "Mac OS X system" of Apple computers, as shown in the figure below.
Conclusion: The above is all the content about the version after factory reset of mac compiled by this site. Thank you for taking the time to read the content of this site. I hope it will be helpful to you. Don’t forget to learn more related content. Find it on this site.
The above is the detailed content of Version after restoring mac to factory settings (will the version change after restoring mac to factory settings). For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
