Why does the induction cooker stop heating once?

Causes and solutions: 1. Power failure, check whether the power plug and power cord are firmly connected; 2. Overload protection, check whether the internal temperature of the induction cooker is too high, the power is overloaded, the use time is too long, etc.; 3. Temperature sensor failure, check whether the sensor is damaged, poor contact, etc.; 4. Control chip failure, check whether the control chip is over-voltage, over-current, electrostatic breakdown, etc.; 5. Heat dissipation problem, whether the radiator of the induction cooker is blocked or dirty , clean it up in time; 6. If the bottom of the pot is uneven, make sure it fits closely with the heating area.

The induction cooker may heat up and then stop for the following reasons:

1. Power supply failure: The induction cooker needs to be normal Electricity supply is required to operate. If the power grid is out of power, the circuit is short-circuited, the switch is damaged, etc., the induction cooker will suddenly stop working.
2. Overload protection: In order to prevent the induction cooker from being damaged due to overload, many induction cookers are equipped with an overload protection mechanism. When the internal temperature of the induction cooker is too high, the power is overloaded, the use time is too long and other conditions occur, the overload protection will be triggered, causing the induction cooker to stop working immediately.
3. Temperature sensor failure: Induction cookers are often equipped with temperature sensors to control the heating temperature. If the sensor fails, such as damage, poor contact, etc., the induction cooker may stop heating or heat abnormally.
4. Control chip failure: Induction cookers are usually controlled by a control chip. If there is a problem with the control chip, such as overvoltage, overcurrent, electrostatic breakdown, etc., the induction cooker will not be able to operate normally.
5. Heat dissipation problem: If the radiator of the induction cooker is blocked or dirty, it will cause the induction cooker to overheat and automatically stop heating.
6. Uneven bottom of the pot: If the bottom of the pot does not fit tightly with the heating area, it will cause uneven heating, causing the induction cooker to stop heating.

For the above reasons, you can take the following measures to solve them:

1. Check whether the power plug and power cord are firmly connected and not loose or damaged.
2. Check whether the radiator of the induction cooker is blocked or dirty and clean it in time.
3. Check whether the bottom of the pot is flat and ensure it fits tightly against the heating area.
4. Check whether the control panel settings are correct.
5. If none of the above methods can solve the problem, it is recommended to contact after-sales service personnel or professional maintenance personnel for maintenance.

The above is the detailed content of Why does the induction cooker stop heating once?. For more information, please follow other related articles on the PHP Chinese website!