Foreword: Many friends have asked questions about installing mac partitions on 2t mechanical hard drives. This text site will give you a detailed answer for your reference. I hope it will be helpful to you! Let’s take a look!
Format the partition. Here are the partition format settings. Only the NTFS partition format is supported for large capacities. At the same time, you can customize the disk name (volume label). Use quick format. Click: "Next" and the first partition is completed. Repeat steps 3 to 7 above to create the next partition.
After installing the hard disk to the computer, turn it on, select My Computer on the computer desktop, right-click - "Manage" to enter the computer management interface. Select "Disk Management", the system will pop up a new hard disk detected and ask to initialize the hard disk, as shown in the figure, click: "OK" to initialize.
Next, the editor will teach you how to partition a mechanical hard drive. First, you can use the system's own tools to partition under the Windows interface. Click the "Start" button, right-click the "Computer" option in the "Start" menu, and select "Manage" in the pop-up menu.
For a 1T mechanical hard drive, a common suggestion is to divide it into two partitions: a smaller partition (such as 100-200GB) for commonly used software, and another larger partition for storage Data and other software. This avoids a situation where the operating system or software is also affected if data is lost or corrupted.
As for mechanical hard drives, they generally have a relatively large capacity. You can divide the partitions according to your actual situation. Generally, it is divided into 3 to 4 partitions depending on the capacity. You can evenly distribute the capacity of each partition, or you can customize it. to divide.
The steps to partition the hard disk of Apple notebook (MACBOOK) are as follows: Find the Disk Utility column in the application options. After clicking to select the 500G primary hard drive, find the partition function page on the right. Open the drop-down page of the partition layout button, select a partition you want to add, and click the plus sign in the lower left corner to fill in the size.
Mac partition: Select Applications--Others, select Disk Utility. First select Show All Devices, then select the hard drive - Erase. (Erasing is equivalent to formatting the hard drive, remember to back up data). Select macOS extended format. Erase the files on the hard drive and reformat them.
Right-click this computer on the desktop, and select Manage from the menu item that opens. In the Computer Management window, click Disk Management under Storage on the left. Select the disk to be partitioned and right-click. In the menu item that opens, select Compress Volume.
1. Hard drive partition: The first one is the system disk. Since it is a 2TB hard drive, then you 50G is more than enough.
2. Divide the remaining memory on the F drive and put some frequently used files, or divide it into another G drive.
3. Right-click the mouse to open management. Find your mobile hard drive in Disk Management and don’t select the wrong disk. Right-click the mobile hard drive and select Delete Volume from the menu. When the mobile hard disk becomes unallocated space, right-click again and select New Simple Volume.
4. The solution is as follows: A single fat32 file cannot exceed 4G. Exfat was developed to solve this problem. It is between fat32 and ntfs, but it is only used for USB disks. ntfs does not have this problem, but ntfs has to read and write to the hard disk every time, which damages the hard disk, but it is the best in comparison.
5. If you need a system disk, divide 162G into C drive to install the system, and the remaining D drive can be in NTFS format. If you don't need a system disk, a whole partition will do.
1. Partitioning can be done through the "Disk Utility" that comes with MACBOOK. The specific steps are as follows: Click on the upper menu bar of the mac system - Utilities - Disk Tools, and click to open. Check the capacity of the hard disk and decide the capacity to create a partition based on the "actual available" capacity.
2. Open the launchpad in the dock, click on the search box, and enter the word disk. 2. After entering Disk Utility, you will find that there are two hard disks. In fact, the one on the top left is the physical hard disk, and the one below is the partition. To partition, click the physical hard drive at the top of the left panel in Figure 2, and then click the partition option on the home page on the right.
3. Find [launchpad] in [Program Dock]. Find the [Other] folder. Click to open [Disk Utility] settings. Click the [ ] sign in the upper left corner of the [Disk Utility] interface. Enter the name and format of the partition. Set the size of the partition and click OK to partition.
If you need a system disk, divide 162G into C drive to install the system, and the remaining D drive can be in NTFS format. If you don't need a system disk, a whole partition will do.
Rotational Speed or Spindle speed is the rotation speed of the motor spindle in the hard disk, which is the maximum number of revolutions that the hard disk platter can complete in one minute.
http://bbs.duba.net/thread-21872560-1-html Open the webpage and drag down to find the diagram of partitioning a new hard disk under Windows.
Double-click on the computer desktop to open "This Computer" (My Computer). Select a hard drive and right-click. Select "Properties" from the menu. In the "Properties" interface, click "Tools" to enter. Select "Optimization" in "Tools" and click to enter.
As for mechanical hard drives, they generally have a relatively large capacity. You can divide the partitions according to your actual situation. Generally, it is divided into 3 to 4 partitions depending on the capacity. You can evenly distribute the capacity of each partition, or you can customize it. to divide.
Start pe first. The following picture is the interface of pe. Select one to enter. Click the partition software shown in the picture below on the desktop to enter the partition interface. After entering the partition software, click SSD on the left side of the partition software. After selecting the SSD, click Quick Partition on the menu.
Conclusion: The above is a summary of the answers related to installing mac partitions on 2t mechanical hard drives compiled by this site. I hope it will be helpful to you! If your problem is solved, please share it with more friends who care about this problem~
The above is the detailed content of How to install mac partition on 2t mechanical hard drive?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
