Foreword: Many friends have asked questions about restarting the Mac after entering the password after booting it. This text site will give you a detailed answer for your reference. I hope it will be helpful to you! Let’s take a look!
1. If the lock screen interface you are on is a sub-user interface, it cannot be unlocked using the main user password. It is recommended that you switch to the main user and try to unlock it. The switching method: click more Switch the user avatar, or you can restart your phone. After restarting, it will default to the main space.
2. If the phone prompts for an incorrect password when unlocking the screen after upgrading the system with a mixed password, this is due to the security of the Android system.
3. Confirm whether the password has been changed: The lock screen password of your phone may have been changed by someone else. It is recommended that you confirm whether the password has been changed by someone around you.
Solution: Reset password. The first method: Turn on the computer and press CMD R to enter the network recovery mode, wait for the earth to rotate and the progress bar to finish reading, enter the system tools - terminal - enter resetpassword to change the password directly.
Always hold down the ALT key to boot and enter Select Recovery. Or hold down the Command R key to enter the mac OS utility. Select Reinstall mac OS and continue to the next step. Go to the next choice and continue... Just wait until the system is installed. Select Simplified Pinyin, set it later, and continue.
Why can’t macbookair enter after entering the correct password? Solution: Reset the password. The first method: Turn on the computer and press CMD R to enter the network recovery mode, wait for the earth to rotate and the progress bar to finish reading, enter the system tools - terminal - enter resetpassword to change the password directly.
Use U disk to restore (prerequisite is that you have a U disk system. It is very simple to make a U disk OSX system. Many fool software can help you do it). Use timeMachine to restore (prerequisite is that you have backed up). Note : Both methods are to insert the USB flash drive into the computer, turn on the computer and press option.
The first method: Turn on the computer and press CMD R to enter the network recovery mode, wait for the earth to rotate, the progress bar has finished reading, enter the system tools-terminal-enter resetpassword to change the password directly.
You can try holding down the Shift key before turning on the computer to enter safe mode. If safe mode is used for a long time and there is no problem, then remove all startup items in safe mode and then try restarting.
1. Try a forced restart: Press the Command Control power button until you see the screen go black and then light up again. Reboot into Safe Mode: Force shut down your Mac, then press the Power key, then press and hold the Shift key until the Apple logo appears. If your Mac computer crashes, you can restart it with a key combination.
2. Method Steps The first method: Press and hold the two keys esc to the left of the space bar. The system application manager with the same function as Win will appear. Force quit the program. This can only be solved when you use the program. Computer freeze situation.
3. Here are several methods: Method 1: Use the keyboard key combination to hold down the "control", "option" and "command" keys on the keyboard. Press the power button simultaneously until the computer screen goes black and the computer shuts down. Press the power button again and the computer will restart.
4. There are two ways to restart an Apple computer: click the Apple icon in the upper left corner and select "Restart". Press and hold the power button: Press and hold the power button on the top of your Apple laptop for about 5 seconds until the screen turns off, then release the power button and press the power button again.
5. Here are some processing methods. Restart the computer. If the computer freezes, you can try holding down the power button for about 10 seconds until the computer shuts down. Then press the power button to turn on the computer and see if it can start normally. Check the program If your computer freezes while running a program, there may be a problem with the program itself.
6. If your Mac computer crashes, you can restart it by pressing the key combination. Press and hold the Shift control option key on the laptop keyboard at the same time, then press and hold the power button in the upper right corner until the laptop screen goes black and displays the Apple logo, and then release it.
You can first try to hold down SHIFT CONTROL OPTION to boot. Press and hold the key to reset the SMC for 5 seconds, let go, wait for more than 30 seconds, and try to turn on the phone again. If it doesn't work, you can try turning on the phone again, quickly hold down the COMMAND OPTION P R key without letting go, and let go after 4 boot sounds appear.
There are several reasons why Mac black Apple system gets stuck when entering the password before entering the system. The solutions are as follows: Turn on the Mac system. First enter the Mac system to start the safe mode: press and hold the Shift key immediately after turning on the computer. The Apple system logo will appear on the screen.
Force shutdown and restart the computer to see if you can enter the system normally.
After turning on the Mac computer and entering the password, it is always stuck in the progress bar state. The inability to enter the desktop is caused by a setting error. The solution is: keep pressing the ALT key to boot and enter Select Recovery. Or hold down the Command R key and enter mac OS utility tools. Select Reinstall mac OS and continue to the next step.
The reason why the progress bar of mac stuck after entering the password does not move is caused by a system error. The specific solution steps are as follows: First open the computer, install the external hard drive in the computer, and select the Apple system-specific format MAC OS extension ( log style). Turn on the computer and hold down Command R at the same time to enter recovery system mode.
It is generally caused by disk errors or file errors in the hard disk, poor contact of the hard disk data cable or power cable, or inconsistency with the specifications of the hard disk, etc.; Try to use "Last Safe Configuration" to enter the system when the computer is turned on.
. Try booting, after checking the computer brand, press F8, Enter, Enter, enter safe mode, Advanced Startup Options, Last Known Good Configuration, Enter, Enter, press to try! 2. If that doesn't work, enter safe mode, start normally, press Enter, go to the desktop, use anti-virus software, and perform a full anti-virus! 3.
Win7 computer automatically restarts after entering the password when turning on the computer and the solution. Cause: It may be a problem with the win7 system and the system files were accidentally deleted. Or software and hardware driver issues.
Occasionally a blue screen can be restored by restarting the computer! If the virus removal is not complete, you can use Cleanup Assistant, Kingsoft Guard, or 360 First Aid Kit to check and kill Trojans, completely check and kill them, and then repair them.
) In terms of hardware, whether there is any problem with the hard disk, memory, graphics card, motherboard, etc. If it is caused by hardware problems, it is recommended to check them.
Conclusion: The above is all the content that this site has compiled for you about restarting the mac after entering the password after booting. Thank you for taking the time to read the content of this site. I hope it will be helpful to you. Don’t forget to learn more related content. Find it on this site.
The above is the detailed content of Do I need to re-enter my password after restarting my mac?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
