There are two ways to enter the computer's HyperTerminal:
1. Use the HyperTerminal that comes with the Windows system (only applicable to Windows XP and 2000 versions)
Steps:
a. Click "Start"-->"Accessories"-->"Communication"-->"HyperTerminal"
b. In the pop-up dialog box , enter the connection name and port used, select the connection method (such as serial port), and then click the "OK" button
c. You can enter the command in the opened HyperTerminal window
2 . Use third-party software, such as PuTTY
Steps:
a. Download and install PuTTY software
b. Open PuTTY and enter the information you want to connect to in the "Session" tab The host name or IP address and port number (such as connecting through SSH), or directly select the connection type (such as serial port connection), and then click the "Open" button
c. You can enter it in the opened PuTTY window Instructed
HyperTerminal (HyperTerminal) is a serial communication tool that comes with the Windows operating system. It can be used to connect to serial devices, such as routers, switches, etc., and interact with these devices in a console manner. The following are the steps to use Hyper Terminal:
1. Start Hyper Terminal: Search for "Hyper Terminal" in the Windows "Start" menu, and then double-click to open it.
2. Configure serial port connection parameters: Select "File" -> "New Connection", enter the connection name in the pop-up dialog box, select the serial port number and baud rate to be connected, and configure the data bits , parity bit, stop bit and other parameters to facilitate communication with the device to be connected.
3. Connect to the device: Click the "OK" button to connect to the target device. If everything is fine, you will see your device's command prompt in the HyperTerminal window.
4. Execute the command in the Hyper Terminal window: Enter the command to be executed in the Hyper Terminal window and press the "Enter" key to send it. The device will return corresponding output results and display them in the HyperTerminal window.
5. Disconnect: After completing the operation, you can choose to close the HyperTerminal window or select "Connect" -> "Disconnect" from the menu to disconnect from the device.
It should be noted that when using HyperTerminal to connect to a device, you need to ensure that the connection parameters are correct and avoid misoperations during command execution that may cause device failure.
HyperTerminal on the computer can be opened in the following ways:
1. Click "Start"→Accessories→Communication→HyperTerminal;
2. Click After clicking to enter "HyperTerminal", enter a name to name this task;
3. After entering the "Connect to" window, there are "Country (Region)", "Area Code", "Telephone Number" ", "Use when connecting" and other items, among which you only need to add/select the two items "Phone number" and "Use when connecting"; 5. Enter any number in "Phone number", In "Use when connecting", you need to select the corresponding COM port, usually com1 port; 6. After clicking OK, enter the "COM1 Properties" window, mainly to set the port, we only need to click "Restore" Click the "Reset to Default Value" button to automatically restore each parameter to a value that matches the connection properties; 7. After clicking Confirm, the HyperTerminal has been established. HyperTerminal is a universal serial interaction software. Many embedded application systems have corresponding programs to exchange with it. Through these programs, you can interact with the embedded system through HyperTerminal, making HyperTerminal the "display" of the embedded system. . In daily work, we mainly use it to connect some network devices, such as switches, routers, firewalls, IDS, etc., and configure them through the Hyper Terminal.
Win11 has Hyper Terminal. It is a super easy-to-use win11 system. It has a more stable and smooth running experience in win11 super terminal, brings users the ultimate opening speed, and can support the compatible operation of various software. The following introduces the advantages of win11 Hyper Terminal:
1. The system basically provides security tools to prohibit the built-in account acceptance mode of the pipeline integrator.
2. Basically, themes from other companies will not be added. Also break the theme and add what you want.
3. Ensure the best balance between speed and stability and solve the problem of slow installation speed on some computers.
4. According to the user's usage environment and actual needs, you can freely choose the installation method to install the image.
The method of opening HyperTerminal on your computer depends on the operating system you are using. Here's how to open HyperTerminal on different operating systems:
On Windows operating systems, there are several ways to open HyperTerminal (also known as Command Prompt). The following are two common methods:
Method 1: Use the shortcut key
to press the "Win R" key combination to open the run dialog box.
Enter "cmd" or "cmd.exe" and click "OK" to open the Hyper Terminal.
Method 2: Use the Start menu
Click the "Start" button and select the "Windows System" folder.
In this folder, find and click "Command Prompt" or "Command Prompt (Administrator)" to open the Hyper Terminal.
On the Mac operating system, the HyperTerminal application is called Terminal. Here's how to open Terminal:
Method 1: Use Spotlight Search
Click the magnifying glass icon in the upper right corner of the screen to open Spotlight Search.
Enter "terminal" in the search bar, and then click "Terminal" in the search results to open the terminal.
Method 2: Use Launchpad
Open Launchpad, you can find the icon on the Dock bar (gray appearance, with a sun and an elephant icon on it).
Find and click "Terminal" in Launchpad to open the terminal.
No matter which operating system you use, after opening HyperTerminal, you will be able to enter commands and perform various operations, such as managing files, running programs, etc. Please note that HyperTerminal may require administrator rights to execute certain commands. If administrator rights are required, make sure to open the terminal as an administrator.
The first step is to open the HyperTerminal software, we choose to click "Start", then find the attachment and click Communication, see the HyperTerminal selection and click to enter.
The second step is to name it in HyperTerminal. We only need to enter any name in the corresponding name column in the connection description column, and then confirm.
The third step is to open the Connect to this dialog box. There will be corresponding information such as country (region). We only use these two items to set up the phone number and connection. That's it.
The fourth step is to find the phone number box and enter any number in it. Use the COM port in this project when connecting. We generally choose the COM1 port.
Step 5: After filling in some content in the Connect to this dialog box, click "OK" and enter the corresponding dialog box. At this time, the COM1 properties will be opened and the port settings will be made here.
The sixth step is to click the Restore to Default Value option in the COM1 properties, so that the parameters can be automatically restored to the values corresponding to the connection properties. Of course, it can also be set manually.
The eighth step is to enter the corresponding command line operation dialog box, use the mouse to click on the corresponding blank space, then the cursor will be in the dialog box, and then after continuous tapping, you can connect to the corresponding network equipment, and configure and operate the corresponding network equipment. Also note that you need to enter the username and password of the corresponding network device.
After the above explanation, I believe that friends all understand the Hyper Terminal settings. When we perform actual operations, due to the differences in the operating systems themselves, there will be some differences in settings, but generally there will be no essential changes.
The above is the detailed content of How to open the computer's HyperTerminal?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
