How to merge two hard drives for combined use

How to combine two hard drives into one for use

You can solve your problem by creating a volume set. Here are the detailed steps to create a volume set

Volume set is a new hard disk partitioning method that can merge multiple scattered unallocated spaces into an independent large partition. When users need a larger logical disk but only have two smaller physical hard disks, they can use the method of creating a volume set to set the two small hard disks into one large hard disk. The steps to create a volume set are as follows:

1. Open "Disk Manager".

2. Hold down the Ctrl key and click on each scattered space.

3. Select the "Create Volume Set" item under the "Disk Partition" menu.

4. Enter the size of the volume set and confirm.

The following is the creation of the stripe set

In Windows XP, you can use stripe sets to set up two hard disks as one large logical hard disk to achieve balanced reading and writing of information. In this way, the system's read and write operations will be evenly distributed to the two hard disks for transmission. However, it should be noted that since the information is spread across two hard drives, if one of the hard drives is damaged, the entire stripe set cannot be recovered. Here are the steps to create a stripe set: 1. Make sure both hard drives are properly connected to the computer and recognized. 2. Right-click My Computer on the desktop and select Manage. 3. In the Computer Management window, expand the Disk Management option under Storage. 4. In Disk Management, you will see all the hard drives and partitions in your computer. 5

1. Open "Disk Manager".

2. Hold down Ctrl key and click on the free space of the two hard disks.

3. Select "Create Stripe Set" under the "Disk Partition" menu.

4. Enter the size of the stripe set and determine it. Note that the value cannot be greater than 2 times the available space of the smaller hard disk.

If you still don’t understand, you can contact me and I will teach you in detail

How to combine two hard drives of a computer into one

Right-click to select "My Computer", select "Management", select "Disk Management", then right-click to select the drive letter occupied by the mobile hard disk, and then "Delete Logical Drive" in the drive letter corresponding to "Disk 1" It will be reduced in turn, and finally there will be a whole undivided space left. Right-click to format and select "FAT" format, or use the CD tool that comes with the mobile hard disk to format the mobile hard disk.

If both of your hard drives support RAID 0

Can be set from the motherboard bios

RAID 0 is the simplest way

It is to use x pieces of the same hard disk in the form of hardware through an intelligent disk controller or use the disk driver in the operating system to use software

are connected in series to form an independent logical drive. The capacity is x times that of a single hard disk. When computer data is written, it is written to each disk in turn

, when one disk runs out of space, the data will be automatically written to the next disk. Its advantage is that it can increase the capacity of the disk.

The speed is the same as that of any one of the disks. If any one of the disks fails, the entire system will be destroyed, reliable

The performance is 1/n of using a hard disk alone.

The above is the detailed content of How to merge two hard drives for combined use. For more information, please follow other related articles on the PHP Chinese website!