Asus b85 pro gamer chassis jumper connection method

How to connect the ASUS b85 pro gamer chassis jumper?

ASUS b85 pro gamer motherboard connection method:

1. Arrange all the cables together. According to the above labels, first clarify the definition of each cable:

a. Power switch: POWER SW, possible names: POWER, POWER SWITCH, ON/OFF, POWER SETUP, PWR, etc. Function definition: reset button on the front of the chassis.

b. Reset/restart switch: RESETSW, possible names: RESET, Reset Swicth, Reset Setup, RST, etc. Function definition: power-on button on the front of the chassis.

c. Power indicator: /- Possible names: POWER LED, PLED, PWRLED, SYS LED, etc.

d. Hard drive status indicator: HDD LED, Possible names: HD LED

e. Built-in small speaker (or alarm): SPEAKER, possible name: SPK, function definition: motherboard abnormality alarm.

f. Audio connection cable: AUDIO, possible name: FP AUDIO, function definition: chassis front audio, generally a whole.

g, USB connection to the front interface is generally a whole.

2. Find the location of each pin on the motherboard.

3. After all connecting cables are plugged in, check whether all hardware is installed correctly and is solid. Also check that all connections are correct and secure.

4. After the inspection is completed, press the power button on the chassis and check whether all the indicators are normal.

5. After the indicator light is normal, use a USB flash drive and headphones to check whether the front USB and front audio are normal.

6. Check that everything is normal and then cover the chassis. The cable connection work is completed.

Tips: Please perform all operations after the power is turned off.

How to insert the jumper sequence of the sound card on the motherboard?

There are 9 pins in total, 5 rows in total. Assume that there is one pin in the fourth row (a matter of direction, it can also be understood as the second row). Use jumper caps to terminate the middle two and the two on the edge. , it is OK for the third and fifth rows, but the front will not sound. Or refer to the motherboard manual to set the front jumper. If you have inserted the jumper randomly before, the onboard sound card may be burned out. The fault phenomenon seems to be everything. It's normal, the driver is normal, and there is no sound from the small speaker in the lower right corner. I have encountered it a few times and the user plugged it in and broke it. It is recommended to find a professional installer to test the sound card.

What about the external audio of the MSI motherboard? even?

You first find the Audio cable. You see that the second cable in the row has no holes. Then you find a socket on the motherboard. It happens that the second cable has no pins. That is the audio interface. If it is inserted If it still doesn't sound, then you enter the system. There is a red speaker logo (XP) in the lower right corner. If it is win7, look for it in the control panel, and there is a high-definition audio, and then open it. There is an audio I/O, open it. There is "Analog" which is a picture of some jacks. There is a small wrench next to it. Click it and then check the first "Disable front panel detection". If there is no such option, then you can only adjust the motherboard. Enter the motherboard Bios, find the audio option, and change it to AC97.

What is the interface of the motherboard pwr?

1. The jumpers connecting the chassis to the motherboard generally include four motherboard jumpers: USB 2.0, USB 3.0, front audio interface (HD_AUDIO), and POWER SW, RESET SW, POWER LED, and HDD LED. These jumpers The meanings of the lines are as follows.

RESET SW: Chassis reset button; Note: The English abbreviations near the corresponding pins on the motherboard are generally RESET, RST, RS or RE, etc.

POWER SW: Chassis power on/off button; Note: The English abbreviations near the pins at the corresponding positions on the motherboard are generally PWR, Power SW, PWR SW, PW, PW SW, etc.

How to use the blue audio interface on the motherboard?

The audio interfaces on the computer motherboard are all distinguished by color, and the colors have defined standards. Green is the audio output, which is connected to speakers or headphones, red is connected to the microphone, and blue is the audio input. The blue line input. Generally, it is not needed. It is used when the TV and computer are connected to a set of speakers at the same time. Connect the audio output of the TV to the blue interface, then there will be sound when watching TV and playing computer games.

The above is the detailed content of Asus b85 pro gamer chassis jumper connection method. For more information, please follow other related articles on the PHP Chinese website!