To check if this is the case, press the Windows key Q hotkey and enter "update" in Cortana
where the update details are provided. If an update is pending, restart Windows and try installing the printer after the update is installed.
1. Enter "Troubleshooting" in the search box and choose to open the first troubleshooting item;
2. Click "Use Windows Update to solve problems" under "System and Security";
3. In the pop-up window, click Next, and then the errors that occurred in the Windows Update update will be automatically repaired;
4. Restart the computer, and Windows Update will return to normal.
When an error occurs during Windows Update on your computer, you can try the above method to solve it.
1. Directly Win R, open the run window, enter services.msc in the window to open "Services".
2. Find the WindowsUpdate option in the service and check whether the status is "Started". If not, please start the service. And set the startup type to automatic. In the same way, check whether the BackgroundIntelligentTransferService service is turned on. If not, please turn it on and set it to start automatically.
3. Run WindowsUpdate again to check for updates.
The specific steps are as follows: The materials that need to be prepared are: computer,
1. First turn on the computer, right-click on My Computer and select "Properties".
2. Then click to open the "window update" option in the pop-up window.
3. Then click to open "Important Updates" in the pop-up window and select "Never check for updates".
1. Open with command prompt:
Press "Windows X" to open command prompt administrator,
Enter net stop wuauserv and press Enter
Enter net start wuauserv and press Enter
and check whether it is enabled.
2. Perform Windows Update Troubleshooter
If the problem persists, it is recommended that you try the above solution after a clean boot:
1. Press the Win key R at the same time and enter msconfig , Enter.
2. In the System Configuration dialog box, on the Services tab, click or click to select the Hide all Microsoft services check box, and then click or click Disable All . (If you enable the fingerprint recognition function, please do not close the related services)
3. On the "Startup" tab of the "System Configuration" dialog box, click "Open Task Manager".
4. On the "Startup" tab of Task Manager, for each startup item, select the startup item and click "Disable".
5. Close "Task Manager".
6. On the Startup tab of the System Configuration dialog box, click OK, and then restart the computer.
The following are the steps to restore to normal startup:
1. Press the Win key R at the same time, enter msconfig, and press Enter.
2. On the "General" tab, tap or click the "Normal startup" option.
3. Tap or click the Services tab and clear the checkbox next to "Hide all Microsoft services," then tap or click "Enable all."
4. Next, tap or click the Startup tab, then tap or click Open Task Manager.
5. In Task Manager, enable all startup programs, then tap or click OK.
6. If you are prompted to restart your computer, tap or click Restart.
If the above method still cannot solve the problem, please try to enter safe mode to see if you can start the service.
Steps to enter safe mode:
1. Press Windows R, then enter msconfig in the input box and press Enter.
2. Then select the guide above.
3. Then tick Safe Boot, press OK, and restart.
4. Confirm whether the Windows update service can be turned on?
To exit safe mode, just clear the check box on Safe Boot and then restart.
1. When the failure interface appears, press and hold the power switch for 10 seconds to force shutdown. After confirming the shutdown, click the power key again to turn on the computer, and continuously click the F8 key on the keyboard until the advanced startup menu appears. Use the direction key "↓" in the lower right corner of the keyboard to select "Safe Mode" and press "Enter".
2. After about 30 seconds, the system will prompt "Failed to configure Windows Update, revert changes, do not shut down the computer". You do not need to do anything at this time, just wait patiently.
3. After 30 seconds, the computer will automatically restart and enter the Windows startup interface again (the system will automatically update the configuration information at this time)
4. After 30 seconds, you will be able to enter the system desktop and you will be able to operate normally Use your computer
As long as this service process is not disabled and this operating system is still officially supported by Microsoft, updates will be pushed every Tuesday.
windows update is an automatic update tool that is included in most Windows operating systems. It is generally used to provide upgrades for vulnerabilities, drivers, and software.
By updating various plug-ins and vulnerabilities in a timely and effective manner, our computer experience can be made more comfortable, smoother, and safer.update for windows10for x64-based systems is a cumulative update for Windows 10 for x64-based systems. Released on August 11, 2015, it includes improved Windows 10 functionality and resolves the following vulnerability:
3086251ms15-092: Vulnerability in the .NET Framework could allow elevation of privilege
3084525ms15 -091: Cumulative Security Update for Microsoft Edge
3082458ms15-088: Insecure command line argument passing could allow information disclosure
3082487ms15-085: Vulnerability in Installation Manager could allow elevation of privilege
3078662ms15-080: A vulnerability in the Microsoft Graphics component could allow remote code execution
3082442ms15-079: Cumulative security update for Internet Explorer
Windows 10 updates are cumulative. Therefore, this package contains all previously released fixes. If you have a previous update installed, only the new fixes that are included in this package will be downloaded and installed to your computer.
Step 1: Detect update services
Press "Windows R" and enter "services.msc" and press Enter to confirm the Background Intelligent Transfer Service service, Cryptographic service, Software Protection service, and Windows Update service. The corresponding "Status" columns are all in "Started". If you find that one of the above services is "disabled", click the corresponding service, right-click and select "Start". After making the change, check again to ensure that the status of the above service is "Started".
Step 2: Change the network environment and change network settings
1. Click Start, enter Network and Sharing Center in the search box, and press Enter.
2. Click Change Adapter Settings on the left, right-click the local link and select Properties. (If you are using a wireless connection, please right-click the wireless network connection and select Properties.)
3. Double-click Internet Protocol Version 4 (TCP/IPv4) and check Use the following DNS server address.
4. Set as follows: preferred DNS server: 4.2.2.1; backup DNS server: 4.2.2.2.
Step 3: Rename the SoftwareDistribution folder
1. Click Start, enter "cmd" in the search bar, right-click "cmd.exe" and select Run as administrator, enter "net stop wuauserv "Enter.
2. Open C:\Windows, right-click SoftwareDistribution and select Rename.
3. After completing the renaming, run cmd.exe as the administrator and enter "net start wuauserv" and press Enter.
Step 4: Clean boot
1. Press "Windows R" and enter "msconfig", then press Enter. (Tip: If a pop-up box pops up, please click the Continue button in the UAC window.)
2. Click the "Services" tab, select "Hide all Microsoft services", and then click Disable All. (If optional)
3. Click the "Startup" tab, then click Disable All and OK. When you are prompted to restart your computer, click Restart.
After restarting, we will try whether the update can be successful.
The above is the detailed content of Unable to obtain printer driver through Windows Update. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
