To uninstall, find the Control Panel in the Start menu, click Uninstall a Program, open the Programs and Features window, look for the Energy Management program there, and just uninstall it.
The details are as follows:
Solutions to common computer problems
1. Unable to automatically identify the hard disk controller
Use non-genuine individual operating system CDs. This error is prone to occur when using the system. The reason is that the hard disk controller driver automatically loaded by the non-genuine CD does not meet the needs of the computer itself. In this case, it is recommended to replace the genuine CD to install the operating system.
2. Manually update the wrong driver
The windows operating system is used normally, but the manual update of the driver incorrectly updates the driver of the hard disk controller, causing this failure. The solution is to enter the Windows system advanced menu and select the last normal configuration to enter the system normally.
3. Caused by changes in bios settings
The windows operating system is normal, but for some reasons, the user modified the bios settings, resulting in 0x0000007b failure.
Let me tell you, when you click on uninstall, in the pop-up window that appears, do not click to continue uninstalling or click to cancel. Just click on the red "X" in the upper right corner, and then a second pop-up window will pop up. Clicking OK at this time is useful.
Right-click "My Computer" on the desktop, select "Manage", select "Device Manager" in the "Computer Management" that appears, double-click the left button in the block diagram on the right and click "Mouse and Other" Pointing Device", just remove its sub-projects.
It should be the built-in software, so it can’t be uninstalled
Driver Wizard can uninstall the driver through the following steps:
1. Open the Driver Wizard and open the "Treasure Box" in the lower right corner of its interface;
2. In the "Treasure Box" "Open "Driver Management" in the upper left corner of the interface;
3. The "Driver Management" interface pops up and automatically scans the drivers installed in the computer;
4. After the scan is completed, you find the driver you want to uninstall. driver, click the inverted triangle button to the right of "Upgrade" or "Installed";
5. Click "Uninstall" in the pop-up options to uninstall the driver.
Is the dongle sharing software installed? If so, please cancel sharing and then uninstall. If it has been uninstalled, cancel sharing after installation.
The dongle driver file was forcibly killed by the software. Restore or add to whitelist, uninstall if you can't.
The driver cannot be uninstalled or cannot be started successfully. Check the system information for error details.
Open Device Manager. Display all hidden devices, force the services and devices corresponding to the dongle to be manually deleted, uninstall directly after restarting, and then reinstall it (if you know the specific name of the driver, please go directly to the driver directory to delete it manually)
Computer files are damaged, cannot be started, the system crashes, and a blue screen appears. This is an old problem of Windows. Try turning on the computer, press the F8 key, and enter safe mode to see if you can enter it normally (safe mode is the system's minimum load service startup mode). If you can't even enter safe mode, reinstall the system as soon as possible. As long as the system is reinstalled, it will be normal. The usual method of installing the system is:
1 First set up the U disk boot, U disk boot interface, use partitioning software to partition the solid state and align it with 4G, 2 Restore the system image 3 Restart the computer. It will boot from the solid state and install the driver.
4After the installation is completed, restart the computer and you can use it. Installing the system is a little complicated. The above is just a simple handwriting, but it is still too simple and requires specific operations to reinstall the system. You should read the online tutorial, which is very detailed.
1.
Find My Computer on the main interface.
2.
Right-click My Computer and select Device Manager.
3.
The cable network adapter can be found in the new interface.
4.
After clicking, you can see the network card driver currently used, right-click and select Uninstall.
5.
Just wait for the uninstallation to complete.
Since the update cannot be uninstalled in Windows 10 system, you can try to enter WinRE (Windows Recovery Environment) to uninstall the update. The method is as follows:
Hold down the Shift key when clicking "Power - Restart" in the start menu.
After restarting, you can enter the "Select an Option" WinRE interface. As shown in the picture:
Click "Troubleshooting" and you will see the "Uninstall Updates" option in the interface that opens. As shown in the picture:
Click "Uninstall Updates" and you can see the next-level options "Uninstall the latest quality update" and "Uninstall the latest feature update". As shown in the figure:
Select the corresponding option to uninstall the update.
1. Taking the Win7 system as an example, open the Windows Explorer page and click the "Open Control Panel" button at the top of the page;
2.На открывшейся странице нажмите пункт меню «Устройства и принтеры»
3.Выберите установленное в данный момент принтер HP и нажмите кнопку «Свойства сервера печати» вверху страницы. страница;
4. На открывшейся странице нажмите вкладку «Драйвер» вверху страницы, выберите установленный драйвер принтера HP и нажмите кнопку «Удалить» внизу;
5. Наконец, во всплывающем диалоговом окне выберите параметр «Удалить драйвер и пакет драйверов» и нажмите кнопку «ОК» внизу.
The above is the detailed content of How to uninstall the power driver in Windows 10?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
