Master the steps to refresh ASUS motherboard BIOS

How to refresh the BIOS of an ASUS motherboard? How to refresh the BIOS of an ASUS motherboard?

There are two ways to flash the BIOS:

One is to upgrade by running the BIOS refresh program under the operating system, and the other is to use a USB disk or CD in the BIOS setup interface Wait for the external storage device to refresh.

Before refreshing the BIOS, back up the original BIOS files and make sure not to power off or restart during the refresh process to avoid failure to refresh the BIOS or damage to the motherboard. Flashing the BIOS needs to be done with caution, and it is recommended to do it under the guidance of professionals or with certain experience.

4 ways to flash BIOS for ASUS motherboard How to flash BIOS for ASUS motherboard?

1. Use EZ Flash 3 to update the BIOS through a USB flash drive or network in the BIOS environment;

2. Use EZ Update to update the BIOS through software in the Windows environment;

3. Use USB BIOS FlashBack to update the BIOS through a USB flash drive when the computer is shut down or the CPU is not installed. This is only applicable to some models;

4. Use BIOSRenamer to rename the downloaded BIOS file and then put it in Insert the USB flash drive, and then press and hold the FlashBack button during the boot process to update the BIOS. This is only applicable to some models.

Flashing the BIOS is a high-risk operation, which may cause problems such as not booting or being unable to use the new CPU. Please be sure to back up your data and follow official instructions.

How to set up ASUS motherboard bios?

1. First, after pressing the power button of the host, immediately press the DEL key to enter the CMOS settings (different models of motherboards have different entry methods. You can operate keys such as F2, ESC, etc. according to the page prompts).

2. After that, we can see the main interface of the BIOS. If the current display is English, it can be set through the language bar in the upper right corner. (Note that if you need to retain the image, you can insert the USB flash drive into the computer and press F12 to retain the current page image).

3. On the main page, we can see the basic status of the crashed motherboard, such as time, temperature, voltage of the CPU and motherboard, etc. There is a system performance diagram below, which allows users to understand the motherboard situation more intuitively.

4. There is a "Startup Order" field at the bottom. You can change the startup options by dragging with the mouse. For example, when we use the USB disk PE tool to install the system, we can adjust UEFI to the first position. 42 Micro-Pe tool to create U disk PE system method

5. Then, click "Advanced Mode (F7)" with the mouse, and click "OK" on the pop-up page.

6. Enter "Advanced Options" and you can see options such as Summary, Advanced, Monitoring, Startup, Tools, etc. The summary mainly introduces the BIOS information, version, current CPU, memory, date, etc. We can perform regular upgrades according to the BIOS version.

7. In the advanced options, you can click the "Advanced Power Management (APM)" option to set the computer's scheduled startup function. After entering, turn on wake-up by RTC (this is the south bridge module wake-up, as long as the CMOS battery has power and the computer power is turned on, it can wake up).

8. In the "SATA Settings" of the advanced options, you can change the hard disk mode. (Generally, it can be used when changing systems. For example, XP generally uses IDE mode, and Win7 and above systems use AHCI mode).

9. In the "Advanced" USB settings, we can turn on the USB mode as needed. For example, whether to open or close the USB2.0 or 3.0 port; the recognition mode of Southbridge xHCI.

10. In the "Monitoring" option, the BIOS can constantly detect the motherboard temperature, fan speed, computer and other conditions.

11. In the startup item, you can set the motherboard startup speed, USB keyboard/mouse support, etc. The last "tool" is actually the BIOS update option. You can download the latest BIOS information from the official website, put it in a USB flash drive, insert it into your computer and perform the update operation.

How to refresh the BIOS of an ASUS motherboard? How to refresh the BIOS of an ASUS motherboard?

Asus motherboard flash BIOS method:

1: Download the bios file corresponding to the motherboard model and hardware version from the official website, unzip it and save it for later use. You can put it on the hard disk or U disk, and remember the storage location.

2: Press the power button, immediately click the del key, enter bios, click tool ---ASUS EZ Flash.

3: Click on the storage disk where the bios file is stored on the left, and select the bios upgrade file on the right.

4: Prompt whether to verify and refresh the bios. Click OK until the refresh is completed and restart the computer.

5: Continue to enter the bios, press the F5 key to reset the original bios settings, then reset the required parameters, and finally press the f10 key to save the settings and exit.

The details are as follows:

1. The hard disk controller cannot be automatically recognized

If you use non-genuine individual operating system CDs, this error is prone to occur when installing the system. The reason is that the hard disk controller driver automatically loaded by the non-genuine CD does not meet the needs of the computer itself. In this case, it is recommended to replace the genuine CD to install the operating system.

2. Manually update the wrong driver

The windows operating system is used normally, but the manual update of the driver incorrectly updates the driver of the hard disk controller, causing this failure. The solution is to enter the Windows system advanced menu and select the last normal configuration to enter the system normally.

3. Caused by changes in bios settings

The windows operating system is normal, but for some reasons, the user modified the bios settings, resulting in 0x0000007b failure.

How to enter bios on ASUS motherboard?

1.

Start the ASUS notebook

2.

When booting, press the "Del" shortcut key on the keyboard to enter the bios settings

3.

Enter the main interface of bios

How to refresh the bios of ASUS motherboard?

1. Use EZ Flash 3 to update the BIOS through a USB flash drive or network in the BIOS environment;

2. Use EZ Update to update the BIOS through software in the Windows environment;

3. Use USB BIOS FlashBack to update the BIOS through a USB flash drive when the computer is shut down or the CPU is not installed. This is only applicable to some models;

4. Use BIOSRenamer to rename the downloaded BIOS file and then put it in Insert the USB flash drive, and then press and hold the FlashBack button during the boot process to update the BIOS. This is only applicable to some models.

Flashing the BIOS is a high-risk operation, which may cause problems such as not booting or being unable to use the new CPU. Please be sure to back up your data and follow official instructions.

How to flash bios on ASUS motherboard?

Asus motherboard flash BIOS method:

1: Download the bios file corresponding to the motherboard model and hardware version from the official website, unzip it and save it for later use. You can put it on the hard disk or U disk, and remember the storage location.

2: Press the power button, immediately click the del key, enter bios, click tool ---ASUS EZ Flash.

3: Click on the storage disk where the bios file is stored on the left, and select the bios upgrade file on the right.

4: Prompt whether to verify and refresh the bios. Click OK until the refresh is completed and restart the computer.

5: Continue to enter the bios, press the F5 key to reset the original bios settings, then reset the required parameters, and finally press the f10 key to save the settings and exit.

The above is the detailed content of Master the steps to refresh ASUS motherboard BIOS. For more information, please follow other related articles on the PHP Chinese website!