No, z370 can only be installed with 8th generation CPU, i7-7700k is the 7th generation, and requires a 200 series motherboard such as b250, z270. You can change the CPU to the eighth generation, the performance of i5-8600k is similar to that of i7-7700k, or change the motherboard to b250 or z270 motherboard. For i7-7700k, it is recommended to use the higher-end z270 motherboard.
To restore the factory settings of your ASUS Z370 motherboard, you can follow the steps below:
1. Turn off the computer and disconnect the power cord.
2. Open the side panel of the computer case and find the "Clear CMOS" or "CLR_CMOS" interface on the motherboard. This is usually a small pin consisting of two metal pins.
3. Use a metal conductor (such as a screwdriver) to connect the two pins together and maintain contact for about 5 seconds.
4. Remove the metal conductor, reinsert the power cord connection, and restart the computer.
5. When the computer starts, you will see a prompt asking if you want to enter the BIOS setup. If you wish to enter the BIOS setup, press the appropriate key (perhaps Delete, F2, or F10, etc.) to access the BIOS and reconfigure your settings.
Please note that factory reset will clear all BIOS settings and may affect your system performance and stability. Before doing this, make sure to back up important data and files and carefully consider the consequences.
Of course it is supported!
Asus itself is a first-line brand, and Asus Z370 is a high-end product in Intel's 300 series, so it naturally supports 30 series graphics cards! If equipped with a 9th generation processor above i5, you can definitely hold the 30 series graphics card.
The following are the steps for ASUS z370 motherboard to enter the U disk boot:
1. First, insert the U disk into the computer and make sure it contains the installation file for the bootable operating system.
2. Turn on the computer and enter the BIOS settings. You can enter the BIOS setup interface by pressing the power button and repeatedly pressing the DEL or F2 key (different motherboards may have different shortcut keys for entering BIOS setup).
3. After entering the BIOS setup, find the "Boot" tab and use the arrow keys to select "Boot Option #1". Then press Enter.
4. On the interface for selecting a boot device, use the arrow keys to select the USB flash drive and press the Enter key, then select the USB flash drive as the first boot device.
5. Save settings and exit BIOS setup. In the "Exit" tab, select the "Save Changes & Reset" or "Save & Exit" option and press Enter.
6. The computer will restart and boot from the USB flash drive.
Please note that the above steps may vary depending on the operating system version, motherboard model or BIOS version. If you are not sure how to enter the BIOS settings or how to boot the USB flash drive, please consult the relevant user manual or technical support.
Will support it,
Asus itself is a first-tier brand, and Asus Z370 is a high-end product in Intel's 300 series, so it naturally supports 30 series graphics cards! If equipped with a 9th generation processor above i5, you can definitely hold the 30 series graphics card.
1. ASUS Z370M motherboard supports a variety of graphics cards. 2. This is because the ASUS Z370M motherboard uses the PCI-E 3.0 x16 slot, which is currently the most common graphics card interface standard and supports almost all graphics cards on the market. 3. In addition to supporting PCI-E 3.0 x16 slot graphics cards, ASUS Z370M motherboard also supports AMD CrossFireX and NVIDIA SLI multi-graphics card technology, which means you can install multiple graphics cards on the motherboard at the same time to improve graphics processing performance. In addition, the motherboard also provides video output interfaces such as HDMI, DisplayPort and DVI to meet different display needs. In general, the ASUS Z370M motherboard has very wide compatibility with graphics cards and can meet the needs of most users.
i9 9900K.
The Core i9-9900k has 16mb of L3 cache and runs at 3.6ghz by default, but can be boosted up to 5ghz depending on workload. Intel is building the Core i9-9900k on the 14nm production node, with an unknown transistor count.
First, make sure you have installed the CPU, memory, graphics card and other hardware, then plug in the corresponding power supply, hard drive, USB, audio and other cables according to the logo on the back of the motherboard. Pay attention to the direction of the wiring and the location of the jacks. Quantity and type.
Next, follow the instructions in the motherboard manual to connect the buttons, LED lights, audio interface and other cables on the front panel to ensure that the connections are firm and correct.
Finally, plug in the power cord and start the computer to check whether all functions are normal.
The above is the detailed content of Is Z370 motherboard compatible with Intel 7700k processor?. For more information, please follow other related articles on the PHP Chinese website!