How to set UEFI on Gigabyte motherboard:
1. Turn on the computer and press the DEL key to enter the BIOS;
2. Then go to BIOS Features and find Windos 8 Features and return Other OS Then you can see Windows8 and press Enter;
3. Then find the mode selection and select UEFI Only
4. Finally press F10 and select YES to save the settings and restart
GIGABYTE motherboards can use the Gigabyte BIOS flash tool to update the BIOS.
1. Log in to the GIGABYTE official website for support and downloads, enter the motherboard model, download the BIOS firmware version that needs to be upgraded and the BIOS flash software "@BIOS".
2. After the download is completed, install "@BIOS" and decompress the BIOS firmware. Generally, you will get three files.
3. After @BIOS is installed, find it in the start menu and run it.
4. Click "Update BIOS from file" on the right side of the @BIOS main interface, then find the firmware you just downloaded, select the file with the extension BIOS firmware, and confirm.
5. A warning window pops up, meaning "During the BIOS upgrade, the screen may freeze for a few seconds. Are you sure you want to upgrade the BIOS?" Select OK.
6. After the upgrade is completed, you will be prompted to reboot into the BIOS and load the optimization settings. Restart the BIOS, click "Load Optimized Defaults" first, and then modify the BIOS, such as the startup sequence, etc., so that the BIOS upgrade is completed.
The method for flashing the BIOS of a Gigabyte motherboard is as follows:
Method 1:
1. First, confirm the model of the Gigabyte motherboard. When the computer is turned off, press the power button to turn it on. Press the "Del" key on the keyboard, which is also the "Delete" key, so that you can enter the motherboard BIOS setting interface.
2. Click the System tab, and in the pop-up drop-down menu, you can see "EZ Mode", select it and enter it, so that it can be operated more conveniently.
3. Click the "BIOS Functions" tab, and in "Boot Device", find and select "USB Key and PS2 Key", so that you can operate it through a USB keyboard and mouse.
4. Enter the "BIOS Functions" tab, find and select "Network Boot" in "Boot Device", so that the Gigabyte motherboard can be started through network boot.
5. Enter the "BIOS Function" tab, and in "Security Device", you can set the startup password and hard disk password, so as to better protect the security of the motherboard.
6. After completing the above steps, you can save and exit the BIOS of the Gigabyte motherboard.
Method 2:
1. Download the latest BIOS file corresponding to the Gigabyte motherboard model and put it into a USB flash drive.
2. Copy the BIOS file to the FAT32 partition of the USB flash drive.
3. Enter the BIOS setting interface and update the BIOS.
4. Wait for the update to be completed and the computer will automatically restart.
To flash the BIOS of a Gigabyte motherboard, you can follow the steps below:
1. Get the latest BIOS firmware: On the official Gigabyte website, find the support corresponding to your motherboard model page. On this page you should be able to find the latest BIOS firmware version and download link. Make sure to download a firmware file that is fully compatible with your motherboard.
2. Prepare the USB flash drive: Format a reliable USB flash drive into the FAT32 file system and make sure it does not contain any important data. Please note that the capacity of the USB flash drive should be enough to store the BIOS firmware file.
3. Back up the current BIOS settings (optional): Before refreshing the BIOS, it is recommended that you back up the current BIOS settings. When the motherboard starts, there is usually a specific key (such as DEL, F2, F10, etc.) to enter the BIOS setting interface. In the BIOS setting interface, find and select the backup option to save the current BIOS settings to a USB flash drive or other storage device.
4. Make a bootable USB flash drive: Copy the downloaded latest BIOS firmware file to the prepared USB flash drive. Make sure to place the firmware file in the root directory of the USB drive (not in a folder) so that the motherboard can recognize and load it correctly.
5. Enter the BIOS update interface: Insert the USB flash drive into the USB port of the Gigabyte motherboard and restart the computer. During the startup process, press the specific BIOS update button on the motherboard (usually Q-Flash, BIOS Flashback, etc.) to enter the BIOS update interface.
6. Flash BIOS firmware: In the BIOS update interface, follow the on-screen instructions and menu options, select to load the firmware file in the USB flash drive, and start flashing the BIOS. Please be sure to read and follow the instructions carefully to ensure a correct and safe BIOS update.
7. Complete update: Once the BIOS refresh is complete, the computer will restart. After restarting, you may need to re-enter the BIOS setup interface and reconfigure your BIOS settings as needed.
Please note that before performing a BIOS refresh, be sure to understand your motherboard model and the relevant instructions for BIOS updates. When flashing the BIOS, make sure to use a reliable power supply and follow detailed guidelines and precautions provided by GIGABYTE or the motherboard manufacturer. Incorrect BIOS update operation may cause system damage, so it is important to operate with caution. If you are unsure about the procedure or encounter any difficulties, it is recommended to consult GIGABYTE official support or seek professional help.
1.
The moment the computer is turned on and the Gigabyte logo interface pops up, immediately press the "Delete" key or the "F12" key to enter the Gigabyte motherboard BIOS interface.
2.
Enter the Gigabyte motherboard BIOS settings, which are mainly divided into the upper menu bar, the left usage bar, the right reminder bar, etc. The main interface displays the host information settings. Below we can also set processor, memory and voltage related parameters.
3.
Go to the "System information" option. This is the system information interface. You can learn the motherboard model, BIOS version, system language, time and date, etc.
How to flash the BIOS of Gigabyte b85-hd3 motherboard,
1. Download the matching BIOS file, you can see three files, among which the one with b85 is the correct master and BIOS program.
2. Turn on the computer and start F12 PE. Here we take Laomaotao as an example.
3. Enter the Max Dos toolbox and enter the latest version of the tool.
4. Select pure DOS mode to enter.
5. Enter the C drive, and then enter to display the files in the drive.
6. Enter the backup BIOS program.
7. Enter the batch file and refresh the BIOS directly.
8. Enter the refresh interface and automatically refresh. After the refresh is completed, the device will automatically restart several times, so there is no need to worry.
9. Remove the PE disk and enter BIOS/system normally.
The steps are as follows: 1. Download the bios file suitable for your motherboard model and extract it to the root directory of the USB flash drive. 2. Insert the USB flash drive, restart the computer, and enter bios settings. 3. Find the "Q-Flash" option in the bios settings and select it. 4. After entering the Q-Flash page, find the "Update BIOS from Drive" option and select your USB flash drive. 5. Select your bios file and start the update. 6. During the update process, the computer will restart several times. After the update is completed, restart the computer. 7. Check whether the computer starts normally and enter the bios settings to confirm that the bios version has been updated.
The above is the detailed content of How to switch Gigabyte motherboard from legacy mode to UEFI mode?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
