


The trend-setting F5 full-tower case is equipped with AN140 ARGB static pressure fans and supports back-mounted motherboards
News from this site on January 21st, Yingguang launched a new upright full-tower chassis F5, which adopts a quick-detachable front panel design and comes standard with three latest Neptune AN140 static pressure fans, supporting a variety of heat dissipation mode, supports vertical installation of the graphics card and back-mounted motherboard.
The Yingguang F5 was first exposed at the Taipei Computex 2023. It adopts a quick-release front panel design, and users can adjust the configuration according to their preferences.
As shown in the picture, the black version provides Morandi-colored glass and black dust-proof net, while the white version uses natural maple panels with white dust-proof net; the side panels use 3mm tempered glass, both sides It adopts screwless quick release design.
This chassis provides spacious internal space, supports E-ATX, ATX, Micro-ATX, Mini-ITX motherboards, supports diverse cooling modes, and has limited power supply. The length is 230 mm, the graphics card length is limited to 435 mm, and the CPU radiator height is limited to 180 mm.
Yingguang F5 will be pre-installed with three latest AN140 black fans or AN140P white fans according to the color of the fuselage. Users can install up to nine cooling fans, and the top and bottom Water-cooling radiators can also be installed on the top and front (note from this site: a maximum of 420 water-cooling radiators can be installed on the top and bottom, and a maximum of 280 on the front).
Yingguang said that this chassis is compatible with ASUS’s latest BTF series and MSI Project-Zero series ATX back-mounted motherboards, thus helping Users hide the cables, making cable management more convenient and allowing players to get started quickly.
In addition, this chassis provides a USB 3.2 Gen 2x2 Type-C interface, two USB 3.2 Gen 1 interfaces, and a 3.5mm headphone jack on the front.
##
The above is the detailed content of The trend-setting F5 full-tower case is equipped with AN140 ARGB static pressure fans and supports back-mounted motherboards. For more information, please follow other related articles on the PHP Chinese website!

Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!

Hot Article

Hot Tools

Notepad++7.3.1
Easy-to-use and free code editor

SublimeText3 Chinese version
Chinese version, very easy to use

Zend Studio 13.0.1
Powerful PHP integrated development environment

Dreamweaver CS6
Visual web development tools

SublimeText3 Mac version
God-level code editing software (SublimeText3)

Hot Topics



According to news from this site on June 5, Thermaltake exhibited a variety of new chassis products at the 2024 Taipei International Computer Show, including the see-through Tower250/600. Thermaltake has previously launched the M-ATX octagonal column chassis Tower300 with a three-sided glass design of left, front and right front. This time Thermaltake exhibited the ITX model Tower250 and ATX model Tower600 of this series. Tower250 supports ITX motherboards and SFX power supplies, and can be installed with 8 120mm fans and 360 water cooling radiators. Two CT120 fans for air outlet are pre-installed on the top. ▲The picture below is from XFastest. The larger Tower600 supports ATX motherboards including back-plug styles and can be installed on

News from this site on June 8 FSP displayed a variety of PC accessories at Computex 2024 Taipei International Computer Show, including PC cases of various sizes, new air-cooled and liquid-cooled radiators, and a variety of new power supplies. ▲Picture source: Wccftech FSP is showing off its new CannonPro2500W power supply this year, which has been upgraded to ATX3.1 and Gen5.1 standards and has passed 80PLUS230VEU Platinum certification. This power supply is equipped with four PCIe12V-2x6 connectors and can power four RTX4090 graphics cards at the same time. In addition, FSP also launched a new MEGATI series power supply, which adopts 80PLUS platinum design, complies with ATX3.1 standard, has a rated power of 1650W, and is equipped with

According to news from this website on May 16, Patriot recently launched Xingcan Dalan, a 270° sea view room chassis that supports ATX back-mounted motherboards. The chassis is available in black and white, both priced at 499 yuan. As a larger version of the previously launched Xingcanlan chassis, Xingcanlan continues the design elements of this series (such as the vertical mesh on the left side) and further optimizes the overall heat dissipation performance. This chassis adds a mesh area at the rear of the right side of the power supply compartment, which facilitates air exchange in the power supply compartment and improves the air inlet and outlet capabilities of the fan position above the power supply compartment. In addition, Xingcan Dalan has added a bifold door bracket plate in the backline space behind the motherboard, which can be used to block wires. It also provides two 2.5-inch hard drive bays and two 3.5/2.5-inch compatible hard drive bays. The chassis PCIe

According to news from this website on June 5, according to foreign media TechPowerUp, Biostar exhibited two LGA1851 socket Z890 motherboards supporting Intel's next-generation desktop CPU at the 2024 Taipei International Computer Show. These two motherboards are the flagship Z890VALKYRIE "Valkyrie" and the mainstream Z890A-SILVER. Both are ATX specifications and do not have pre-installed wireless network cards. This website summarizes the detailed parameters of the two motherboards as follows: Z890VALKYRIE continues the gold-powder double-wing elements of the "Valkyrie" family, uses a 23-phase power supply design, and is equipped with 4 DDR5 memory slots. ▲Image source TechPowerUp, the same as below. This motherboard provides 3 alloy-reinforced PCIeG

According to the news from this site on April 11, according to the German technology media ComputeBase, Guangji Technology attended the EmbeddedWorld2024 conference and publicly demonstrated a motherboard using the LGA-1851 slot for the first time. This motherboard is compatible with Intel Meteor Lake processors and is mainly used in embedded systems. The media took an in-depth look and shared multiple photos, confirming that LGA-1851 is the same size as Intel’s existing LGA-1700 socket. The relevant pictures attached to this site are as follows: Not compatible with CPU, but compatible with CPU coolers but not LGA-1851 socket 151 additional pins were added and the CPU locking system was adjusted, so it is not compatible with existing LGA-1700 socket processors. But because LG

According to news from this site on April 22, Sapphire (Sapphire Technology) recently launched the NITRO+B650IWIFI ultra-platinum motherboard. The e-commerce platform sells it for 1,689 yuan. You can get a 10 yuan coupon, and the price is 1,679 yuan. According to inquiries on this site, Sapphire released a NITRO+B550I motherboard in 2021, and this new product can be regarded as the successor of that product. Sapphire NITRO+B650IWIFI adopts 8-layer PCB+8-phase digital power supply design, uses PowerStage70ADr.MOS, and supports DDR5-6000+ memory overclocking. In terms of storage, it is equipped with 2 Gen4x4 M.2 interfaces and 4 SATA3 interfaces. This motherboard is covered with MOS power supply and front M.2 bay.

This website reported on April 29 that Jiuzhou Fengshen has updated its CH560 chassis with the CH560R back-plug version, which supports the installation of E-ATX motherboards and dual 360 water cooling. The black price is 399 yuan and the white price is 449 yuan. Kyushu Fengshen CH560R chassis is compatible with back-plug motherboards and has more than 30% mesh panels, taking into account both aesthetics and heat dissipation capabilities. In terms of compatibility, the CH560R chassis supports up to E-ATX motherboards, CPU radiators up to 175mm, graphics cards up to 380mm in length, and ATX power supplies up to 170mm in length. The chassis supports up to dual 360-degree cold radiators on the front and top, has up to 9 fan positions, and supports the simultaneous installation of two 2.5-inch SSDs and two 3.5-inch HDD hard drives. Kyushu Fengshen CH560R

According to news from this site on July 27, ASRock recently announced the launch of the X600TM-ITX motherboard, claiming to be "the world's first ThinMiniITX motherboard that supports AM5". The motherboard size is 17*17 cm and supports AMD Ryzen 9000/8000/7000 series processing. device. ASRock said that this motherboard is suitable for products such as mini computers, all-in-one computers, smart mirrors, educational tools, and home theater computers, and can handle various tasks in daily offices, presentations, and work. X600TM-ITX supports the latest AM5 processor, which improves performance by up to 1.33 times compared to the previous generation. This means faster speeds, increased multitasking capabilities, better gaming experiences, faster data processing, and
