Unreadable Mac hard drive cannot be read in Windows after reinstalling-MAC-php.cn

This article will introduce the relevant content of Mac reinstalling the hard disk that cannot read 6. I hope it will be helpful to you. Please read on.

Solution to the problem that the disk cannot be found when reinstalling the Apple Mac computer system

1. Open the Control Panel and click Device Manager to view. See if you can find the mechanical hard drive. If you can't, it means the mechanical drive is not mounted.

The solution is as follows: Hold down the option command r key during restart, connect to Wi-Fi and download the network recovery disk. Once the download is complete, open Disk Utility, check if the disk exists and select the individual partitions. Select Mac OS Extended Journaled, click Options, select GUID Partition Table, and click Apply. After exiting Disk Utility, click Install Mac OS.

When restarting your Mac, you can press the Command+R or Command+Option+R keys to enter the OSX utility. If these key combinations don't work, you can try shutting down your computer and then turning it back on by holding down the Command + Option + R keys until the globe icon appears on the screen. This will allow you to enter recovery mode and proceed accordingly.

4. After entering the BIOS setting interface, find the relevant options, which may vary depending on the host. Once you find the option, press the F10 key on your keyboard, then select "YES" and press Enter to confirm save and exit. Next, the host will automatically reboot. Finally, reinstall the operating system in the normal way. According to the theoretical situation, this can solve the problem of not being able to find the hard disk.

How to solve the problem of Mac not recognizing the external hard drive? Ask for the method

The specific method is as follows: If this prompt appears after booting, it means that the SSD has been successfully connected. Click Initialize and open Disk Utility. Find the SSD in Disk Utility and the status will show as uninitialized.

The solution to this problem is to use Disk Utility to mount the removable hard drive into the Mac system. If your mobile hard drive is in NTFS format, the writing operation cannot be performed because the Mac system cannot write to this format. At this time, you can try to change the hard disk format to a file system supported by Mac to solve this problem.

The steps to download the Mac version and download the Win version are as follows: scan first, select the partition where data is lost, and then use EaseUS Data Recovery Wizard for Mac Pro to scan. Next is preview, double-click to open the file to preview the file contents.

Try to use the disk utility that comes with your Mac computer to view the mobile hard drive icon. To open Disk Utility, press the F4 key, select "Others" and then "Disk Utility". However, I ran into a problem, Daisy kept spinning and couldn't find my portable hard drive.

Unreadable Mac hard drive cannot be read in Windows after reinstalling

What to do if the Mac hard disk data cannot be read

1.) Click the ntfs for mac icon. 3): The following picture appears. Check the access permissions and click Settings to start. 4): Open the inserted hard disk. Now the mac can recognize the mobile hard disk, and we can do any operation on the data in the hard disk.

2. First: If it cannot be displayed on an Apple computer, you can actually find a Windows computer and connect the mobile hard disk to the USB interface. Then it can be displayed as follows. The mobile hard disk and U disk are displayed in different locations. They are displayed in the local system.

3. Search on Baidu to download and install NTFS For Mac15, click Mac System Preferences, open the software; then insert the mobile hard drive, NTFS For Mac will automatically recognize the NTFS partition of the mobile hard drive; this way you can The hard disk is performing operations such as reading and writing.

4. Today, the editor will share the solution to the problem that the hard disk cannot be recognized after the Mac computer is installed! The specific method is as follows: This prompt appears when you turn on the computer, indicating that the SSD connection is successful. At this time, click Initialize... to open Disk Utility.

What should I do if the hard drive cannot be recognized by the Apple computer MAC?

1. Mac cannot recognize the external hard drive. If your Mac cannot recognize the external hard drive, please calm down and check first. The operating condition of the external hard drive to choose the appropriate remedy.

3. This prompt appears when booting, indicating that the SSD connection is successful. At this time, click Initialize... to open Disk Utility. Find the SSD in Disk Utility and its status will be displayed as uninitialized.

4. This kind of failure mostly occurs on the connecting cable or IDE port. The failure rate of the hard disk itself is very small. You can perform replacement tests by re-plugging and unplugging the hard disk cable or changing the IDE port and cable. The problem can be easily solved. Find the fault quickly.

5. Check whether the mobile hard drive is correctly inserted into the Mac computer. Check whether the mobile hard disk has power. The power supply may be insufficient. Check whether the USB data cable connected to the mobile hard disk is damaged. It may be caused by a system failure. Restart your Mac computer to see if it can be recognized normally.

Tutorial on solving the problem that the computer cannot read the disk when the Mac is turned on after installing the SSD

This prompt appears when the computer is turned on, indicating that the SSD connection is successful. At this time, click Initialize... to open Disk Utility. Find the SSD in Disk Utility and its status will be displayed as uninitialized.

Solution: Press option command r when restarting, connect to wifi to download the network recovery disk, after downloading, click Disk Utility-Partition-check here to see if there is a disk, single partition-macos extended journal-option-guid partition table (I remember this one) - Application. After exiting Disk Utility, click Install macos.

Solution: Format the disk and set the disk format to exfat. If there is data in the disk that needs to be saved, you can first insert the removable disk into a Windows computer, copy the data, and then insert it into a Mac computer for formatting.

The optical drive cable may be broken. 2. The optical drive bay may have insufficient power supply. You need to buy a bay that supports power supply for the optical drive bay. . I've encountered this before, don't buy the gray aluminum foil bracket, there's a problem with the power supply.

Conclusion: The above is a summary of answers related to Mac reinstallation hard disk cannot be read 6 compiled by this site. I hope it will be helpful to you! If your problem is solved, please share it with more friends who care about this problem~

The above is the detailed content of Unreadable Mac hard drive cannot be read in Windows after reinstalling. For more information, please follow other related articles on the PHP Chinese website!