What is the cause of automatic restart and the incompatible object of the memory module?

What causes the memory module to automatically restart if it is incompatible with it?

If the memory module is not compatible with the motherboard, it will automatically restart. The solution is as follows:

1. Use 360 ​​System Reinstallation Master to reinstall the system.

4. Under the premise that the computer can basically boot, enter the BIOS settings and set the memory-related settings according to the specifications of the low-speed memory.

For example: use one of the memory (if DDR333 and DDR400 memory are mixed, it is best to use the DDR333 memory setting), start the computer, enter the BIOS settings, and set the working frequency and response time of the memory. Slow down until the old memory can run stably before shutting down and inserting the second memory.

5. The memory is damaged, replace it with a new one.

The memory module is suddenly incompatible?

Memory incompatibility will cause the following situations:

1. The software often makes errors when running, and the memory cannot be read.

2. The system runs unstable and often crashes or blue screens occur.

3. In severe cases, the computer cannot be started, and a hissing sound occurs as soon as it is turned on.

4. The computer crashes erratically after being turned on. If it is determined that the memory modules are all intact, then the memory modules are incompatible. The detection method is as follows: try to install only one piece of memory to the motherboard, and the fault disappears. It means the memory is incompatible. If the fault persists, it is a problem with the motherboard memory slot. Solution to memory incompatibility 1. If a lot of dust accumulates in the slot of the memory module during the use of the computer, please use an eraser to carefully clean the gold finger of the memory module and reinsert it into the slot. 2. After the computer has been used for a long time, the surface of the gold finger of the memory module will undergo an oxidation reaction. At this time, use hot melt glue to fill the gaps on both sides of the memory slot to prevent continued oxidation during use.

Can computer motherboards and memory modules be matched at will?

Memory modules cannot be randomly matched. Please refer to the following points for selection:

1. Whether the motherboard supports it. If the motherboard is P3 or earlier, it generally supports SDR memory. You can buy PC133 or PC155 memory. If it is a P4 motherboard, it is recommended to use DDR memory. Then check the maximum operating frequency of memory that the motherboard supports. If the motherboard only supports If it supports DDR266, buying DDR333 or DDR400 memory will only be a waste, and the performance will not be fully realized. In addition, you should pay attention to the maximum amount of memory supported by a single slot. If a single slot only supports 128M, even if you use 256M, you will only be able to recognize 128M or even not recognize it.

2. Compatibility. If the compatibility between the memory and the motherboard or other hardware is not good, it may cause frequent crashes at least, or it may cause the computer to fail to boot or burn down. This requires a test installation at the dealer. If it is impossible to test, it is recommended to purchase memory from a well-branded manufacturer, some of which are experts at overclocking.

3. Actual needs. Generally, you choose the memory capacity according to your own needs.

How to solve the problem of incompatibility between the memory and the motherboard?

are all possible.

If the two memories are incompatible (that is, it is normal to use either memory alone, but not normal to use both at the same time), try to manually adjust the delay parameters in the motherboard BIOS (do not set BYSPD, and then Then manually adjust the TRAS, TRCD, TRP, BL and other parameters), or swap the two memory sticks into the memory slots (put the slower one in the DIMM0 memory slot, so that the default parameters in the motherboard BIOS are in accordance with This slow one is the standard).

If the memory and the motherboard are not compatible (that is, it is not normal to use only one memory), try upgrading the motherboard BIOS. If it still doesn't work, just replace the strip.

In fact, memory modules are now very public, and memory particles are produced in a small number of wafer factories, so incompatibility issues are now rarely encountered. Unless it is some particularly high-end memory modules with extremely extreme parameters and voltage settings, it will be difficult to encounter incompatibility. If the original memory is not easy to buy (especially the memory on branded machines), there will generally be no problem with other different brands.

Why can’t I boot the computer after changing the memory module to another slot?

The computer cannot start after replacing the memory module. The possible reasons are as follows:

1. There is a problem with the replaced memory module. Replace the memory module.

2. The replaced memory module has poor contact with the motherboard slot. Clean the gold fingers of the memory module and try plugging it in again.

3. The replaced memory module is incompatible with the motherboard. Replace it with another brand of memory module and it will return to normal.

What should I do if the memory module and motherboard notches are different?

Different notch positions between the memory module and the motherboard mean incompatibility, because different memory slots are suitable for different memory modules. Different notches mean that the memory model is incorrect.

The design position of the product notch of each generation of memory from DDR, DDR2, DDR3 to the current DDR4 is different, which means that products of different generations cannot be used universally from the beginning of the design. Desktop memory and laptop memory are not universal, regardless of whether they are of the same generation, and are completely different in size and specifications.

Both DDR2 and DDR3 have 240 pins (double-sided). The notch of DDR2 memory is behind the 64th pin on the left side, and there are 56 pins on the other side of the notch. The notch of DDR3 is behind the 72 pins on the left side, and there are 48 pins on the other side of the notch. The notch is further to the right than the notch of DDR2 memory.

How to solve the problem that the memory module is not compatible with the motherboard?

Incompatibility between the memory module and the motherboard may cause the computer to fail to start normally or cause stability problems. If you encounter a situation where the memory module is incompatible with the motherboard, you can try the following solutions:

1. Confirm the specifications: First, make sure that the memory module you purchased meets the motherboard's supported specifications. Consult the motherboard's manual or official website to learn about the memory type, frequency, capacity and slot specifications supported by the motherboard. Then, compare it with the memory module you purchased to make sure its specifications are compatible with the motherboard.

2. Update the motherboard BIOS: Sometimes, the motherboard's BIOS firmware may need to be updated to support new memory modules. Visit the motherboard manufacturer's official website to find your motherboard model and download the latest BIOS update. Before updating the BIOS, be sure to carefully read the update instructions and precautions provided by the motherboard manufacturer to avoid unexpected problems.

3. Replace the memory module: If it is confirmed that the memory module is not compatible with the motherboard, you may need to replace the memory module. Purchase new memory modules that meet your motherboard's specifications and make sure they are plugged into the correct memory slots (usually the same color slots, but this may vary by motherboard model).

4. Clean the memory slot: Sometimes, dirt or oxidation may cause poor contact in the memory slot, affecting the normal operation of the memory module. You can use cleaning products such as compressed air or absolute alcohol to clean the memory slots and make sure the memory modules are inserted correctly.

5. Single memory stick test: If you use multiple memory sticks, try to insert each memory stick individually to see if one of them causes incompatibility issues. This can rule out whether there is a problem caused by a single memory.

6. Consult professional technical support: If you still cannot solve the problem after trying the above methods, it is recommended to consult the technical support of the motherboard or memory manufacturer. They may be able to provide more specific help and solutions.

Finally, in order to avoid the problem of incompatibility between the memory module and the motherboard, when purchasing a memory module, it is recommended to choose the brand and model supported by the motherboard, or to purchase memory modules certified by the motherboard manufacturer. This reduces the possibility of compatibility issues.

The above is the detailed content of What is the cause of automatic restart and the incompatible object of the memory module?. For more information, please follow other related articles on the PHP Chinese website!