Optical mode connection method of wireless routing all-in-one machine

Fortunately, your all-in-one wireless routing machine has the wan function, otherwise it would not work. The connection method is as follows:

Use a network cable, plug one end into the network port 1 or network port 2 of the optical modem, and plug the other end into the red port on the far left of the all-in-one machine. The remaining three red ports can be used to connect three computers.

Keep the original intention and fine-tune the content: When setting up, do not connect the optical modem to the all-in-one computer. Instead, connect a computer to the all-in-one and then go to the router settings page. Select the Internet access method as PPPOE (ADSL) and enter the broadband account password. Next, set up your wireless network. The most critical step is to set the leftmost red port as the WAN port. If there are detailed instructions, please refer to the instructions to operate; if there are no instructions, you can only look it up yourself. This step is very critical.

If the login IP of the optical modem and the all-in-one machine are the same (for example, both are 192.168.1.1), you need to change the login IP of the all-in-one machine to a different IP, for example, to 192.168.2.1. Also confirm whether Guangmao has a login IP.

The setup of this all-in-one machine is a little more complicated, and it may be difficult if you are not familiar with the operation of the router. If you are unable to operate it yourself, you can seek help from someone who understands routers.

The above is the detailed content of Optical mode connection method of wireless routing all-in-one machine. For more information, please follow other related articles on the PHP Chinese website!