1. Jailbroken users
Delete the /private/var/keychains/keychain-2.db file in the mobile phone directory and restart the iPhone.
2. If there is no jailbreak, you can only flash the phone. It is best to back up all software and other resources before flashing, otherwise they will be lost after flashing.
1. Turn off your iPhone or tablet (shut down).
2. Use the data cable to connect the iPhone to the computer and open iTunes;
3. Press and hold the power button of your iPhone or tablet.
4. When the Apple LOGO appears, do not release the power button, and press and hold the HOME button on the iPhone or tablet at the same time for about 10 seconds.
5. After the iPhone or tablet screen goes black, continue to hold down the HOME button and release the power button until iTunes prompts "You have a device in recovery mode". At this time, you can release the HOME button. , the screen will remain black.
After completing the above steps, you will enter DFU mode
1. Use iTunes to import firmware for system recovery (upgrade)
2. Click "Confirm", then hold down the Shift key on the keyboard and click "Restore" with the mouse to open the dialog box.
3. Wait for iTunes to restore the firmware. The whole process takes about a few minutes.
4. After the recovery is completed, iTunes will prompt "iPhone will be restored to factory settings and will restart"
5. Firmware recovery (flashing) is completed, use iTunes to restore backup data
6. The system upgrade is completed, the welcome interface appears, and the flashing is completed
There are several solutions for forgetting the lock screen password on Apple mobile phones. The specific situations are as follows:
Option 1: Flash the phone
1. Install itunes on your computer and open itunes after installation;
2. Connect the iPhone to the computer using a data cable (the iPhone can be found, but the connection cannot be established);
3. Press the iPhone’s power button (power button) and home button at the same time until the iPhone appears in the software installation state;
4. Use the recovery function in itunes to re-initialize the iPhone (note: the original data in the iPhone will be lost);
5. After passing the verification and software reinstallation, reactivate the iPhone.
Option 2: Delete password
1. Install itools on your computer and open it after installation;
2. Connect your iPhone to itools;
3. Find "File Management" and enter the /private/var/keychains/ directory, rename keychain-2.db, such as keychain-2.bak.db or delete it directly. Then press and hold the power key until the red shutdown slider appears.
4. Turn off the phone and then turn it on again.
Option 3: Find a local Apple repair shop and let professional technicians help solve the problem.
You must flash the phone to solve the problem. If your phone has an ID that is not your own, you cannot flash the phone, otherwise it will not be activated. Do not
How to enter the highest version to flash:
1. Turn off your iPhone.
2. Press and hold the power button and home button at the same time.
3. When you see the white Apple Logo, please release the power button and continue to hold the Home button.
4. Open iTunes and wait for it to prompt you to enter recovery mode. Then hold down the Shift key on the keyboard, click "Restore", and select the corresponding firmware to restore.
Some users do not control the timing well, resulting in failure to enter DFU mode. These users can refer to the following method:
1. Press and hold the power button on the top for 3 seconds;
2. Do not release the power button and hold the home button for 10 seconds;
3. Release the power button and continue to hold the home button for 30 seconds until iTunes automatically detects the iPhone in recovery mode and then release it.
Method 2, black screen recovery
1. Connect the iPhone to the computer using a USB cable, and then you will hear a sound prompt that the computer has been connected successfully.
2. Now please turn off the iPhone first, and then you will hear the prompt sound that the computer has not been connected successfully.
3. Please press and hold the power button and home button at the same time until the 10th second. Please release the power button immediately and continue to hold the home button.
4. At this time, iTunes will automatically start and prompt you to enter recovery mode (the iPhone will remain black screen), then you can hold down the Shift key on the keyboard, click "Restore", and select the corresponding firmware to restore. .
Hello, there are several solutions for forgetting the lock screen password on your Apple phone. The specific situation is as follows:
Option 1: Flash the phone
1. Install itunes on your computer and open itunes after installation;
2. Connect the iPhone to the computer using a data cable (the iPhone can be found, but the connection cannot be established);
3. Press the iPhone’s power button (power button) and home button at the same time until the iPhone appears in the software installation state;
4. Use the recovery function in itunes to re-initialize the iPhone (note: the original data in the iPhone will be lost);
5. After passing the verification and software reinstallation, reactivate the iPhone.
Option 2: Delete password
1. Install itools on your computer and open it after installation;
2. Connect your iPhone to itools;
3. Find "File Management" and enter the /private/var/keychains/ directory, rename keychain-2.db, such as keychain-2.bak.db or delete it directly. Then press and hold the power key until the red shutdown slider appears.
4. Turn off the phone and then turn it on again.
Option 3: Find a local Apple repair shop and let professional technicians help solve the problem.
Hope it can help you. For details, please contact the repair machine online customer service
The above is the detailed content of What to do if you forget your Apple lock screen password. For more information, please follow other related articles on the PHP Chinese website!