Where to set the AHCI mode of ASUS motherboard?

Where to set AHCI mode on ASUS motherboard?

To set AHCI mode on your ASUS motherboard, you can follow these steps:

1. Turn on the computer and enter the BIOS setup: Press the designated key (usually Del key, F2 key or F10 key) to enter the BIOS setup interface. On ASUS motherboards it may display "Press [key] to enter BIOS" or a similar message.

2. Navigate to Storage Device Settings: Once in the BIOS setup interface, use the arrow keys on your keyboard to navigate to "Advanced" or similar options. Then, find the storage device-related settings in the submenu.

3. Find the SATA configuration: In the storage device settings, look for an option named "SATA Configuration" or a similar name. This option controls the hard drive's operating mode.

4. Set to AHCI mode: In the SATA configuration menu, look for SATA mode or operating mode. Change it from the default IDE or Compatibility (compatibility mode) to AHCI (Advanced Host Controller Interface) mode.

5. Save and exit: After completing the settings, use the specified key to save the changes and exit the BIOS setup interface. Normally, you need to press F10 to save and exit.

6. Restart the computer: Once saved and exited the BIOS setup interface, the computer will restart. At this point, AHCI mode will be applied to the storage devices on the motherboard.

Changing the hard drive operating mode may affect the operating system's boot process. If your operating system was installed in IDE mode and fails to boot after switching to AHCI mode, you may need to make some additional settings or fixes in the operating system to ensure that it boots properly in the new mode.

How to set ahci mode on ASUS motherboard?

AHCI (Advanced Host Controller Interface) is an advanced host controller interface that can improve the performance and stability of the hard disk. If your computer uses an ASUS motherboard, you can follow the steps below to set the AHCI mode:

1. Press the "Delete" key when booting to enter the BIOS setting interface.

2. In the BIOS setup interface, find the "Advanced" tab and select "SATA Configuration" (or similar option).

3. In the "SATA Configuration" option, find "SATA Mode Selection" (or similar option), and then select "AHCI" mode.

4. Save the settings and exit the BIOS setup interface.

5. Restart the computer and the AHCI mode will take effect.

Please note that if your computer has an operating system installed, after switching to AHCI mode, you need to reinstall the AHCI driver in the operating system, otherwise the system may not start. Therefore, before switching to AHCI mode, make sure you have backed up important data and are ready to reinstall the operating system and drivers.

Where to set AHCI mode on ASUS motherboard?

ASUS motherboard can enable AHCI mode through the SATA Configuration option in the BIOS. The specific setting steps are as follows:

1. Press "DEL" or "F2" to enter the BIOS after booting;

2. Find SATA Configuration in the Advanced option page and select to enter;

3. Select AHCI mode.

After the settings are completed, click the F10 key to save the settings in the BIOS, and the machine will automatically restart.

Where to set AHCI mode on ASUS motherboard?

Asus motherboard enables ahci hard disk mode setting method:

1. Press F2 on the keyboard to enter bios settings.

2. Then use the left and right arrow keys to move the cursor to the "advanced" menu.

3. Use the up and down arrow keys to move the cursor to "sata configuration" and press Enter to execute.

4. Move the cursor to "sata mode selection" and press Enter. In the pop-up window, you can see the two options "IDE" and "AHCI". Use the up and down arrow keys to move the cursor. Go to AHCI and press Enter to confirm the selection.

5. Press F10 to save, then restart the computer.

How to enable AHCI mode on ASUS laptop?

Asus notebook needs to modify the BIOS settings to enable AHCI mode. The following are the modification steps:

1. Restart the computer: When turning on the computer, press F2 (or according to the prompts, it may be other function keys, such as F1, F10, ESC, etc.) to enter the BIOS settings.

2. Find the AHCI settings: After entering the BIOS, find the "Advanced" or "Configuration" tab. Find the settings related to SATA or hard disk, such as "SATA Mode", "SATA Operation" or "Hard Disk Mode".

3. Modify the AHCI mode: Set the SATA mode to AHCI. If your current mode is IDE or Compatibility, change to AHCI.

4. Save and exit: After the modification is completed, press F10 to save the settings and exit the BIOS. The computer will automatically restart and the new settings will be applied.

Note: Before modifying BIOS settings, it is recommended that you back up important data just in case. In addition, the BIOS settings of different ASUS notebook models and different versions may be different. When setting up, please operate according to your actual situation.

How to enable ahci on ASUS motherboard?

Asus motherboards can enable AHCI mode in the BIOS through the following steps:

1. After booting, click the F2 key or DEL key to enter the BIOS interface;

2. Click the F7 key Enter the Advanced Mode interface;

3. Select the PCH storage setting under the advanced item;

4. Set the SATA Mode Selection to AHCI.

After the settings are completed, click the F10 key to save and exit the BIOS.

How to enable ahci on ASUS motherboard?

Asus motherboards can enable AHCI mode in the BIOS through the following steps:

1. After booting, click the F2 key or DEL key to enter the BIOS interface;

2. Click the F7 key Enter the Advanced Mode interface;

3. Select the PCH storage setting under the advanced item;

4. Set the SATA Mode Selection to AHCI.

The above is the detailed content of Where to set the AHCI mode of ASUS motherboard?. For more information, please follow other related articles on the PHP Chinese website!