How to Properly Use an Apple Mac Keyboard

How to use the Apple Mac keyboard is very simple. First, make sure the keyboard is connected to your Mac computer. You can then type using the standard QWERTY keyboard layout. There are also some special function keys, such as volume adjustment, screen brightness adjustment, etc., which can be used through key combinations. If you need to enter special characters, you can use the "Option" key plus the corresponding letter key. I hope these simple tips can help you. If you have other questions, please continue

How to use the right button on the full keyboard of Apple Mac computer?

Method 1: You can press it with three fingers Touchpad to simulate the effect of the right mouse button. This method of operation is a convenient alternative for computers that do not have the right mouse button in the lower right corner of the trackpad. Method 2: In "System Preferences" - "Touchpad", you can set the lower right corner of the touchpad to be the right mouse button. In this way, just click the lower right corner of the trackpad to realize the function of the right mouse button. This setting can make the operation effect of the operating system consistent with that of Windows system.

If the notebook does not have a mouse, you can use the right-click function through the following steps. First open your MAC computer and click System Preferences. In the settings window that opens, click Touchpad. Then select the operation type, such as cursor and click, scroll zoom, etc.

You can try the following methods to achieve right-click operation: Method 2: Enable two-finger click, click the Apple menu, select System Preferences, and then open Keyboard and Mouse Settings. Under the Trackpad tab, check "Use two fingers to tap the trackpad for secondary clicking." This way, you can right-click with two fingers.

How to connect the Apple keyboard to the computer

First, determine the interface type of your Apple keyboard. Apple keyboards may be equipped with USB-C, USB-A or Lightning interfaces. You need to make sure your computer has a keyboard-compatible interface. Next, plug the keyboard's connection port into the corresponding USB port on your computer.

By checking Apple’s official website, we learned that Apple keyboards can be connected through USB ports or Bluetooth. First, we need to open Windows Settings, click on the "Devices" option, and then select "Bluetooth and other devices". In the device list, find and select the Apple Keyboard, make sure the keyboard is in pairing mode, and turn on Bluetooth.

Open the Apple menu, select "System Preferences", click "Keyboard", select "Connect a new device", select the device or enter the password, and press "Connect". Press the power button on the iMac keyboard to enter the pairing state, and wait for the iMac to automatically recognize and connect.

Please make sure your Apple keyboard is enabled and has sufficient battery. Open Bluetooth settings in Windows system. You can find the Bluetooth icon in the Windows taskbar or search for Bluetooth in Settings.

How to use the Apple laptop keyboard

Most of the keys on the Mac keyboard have the same functions as the Windows keyboard, such as letters, numbers, spaces, arrows, Caps Lock, Return, Delete, Tab, etc. The difference lies in adjusting functions such as sound and brightness. Windows keyboards usually need to be adjusted using fn F1-F12.

There are several ways to achieve uppercase input. First of all, whether you are in Chinese or lowercase English, you can input uppercase letters by holding down the shift key. Another method is to hold down the caps lock key for 2 seconds. When the caps lock light comes on, you can switch to uppercase input state. The last method is to customize the keyboard to switch between upper and lower case. The above are three simple methods to achieve uppercase input.

3. When the computer starts, press and hold the "option" key at the same time to rebuild the desktop. This operation should be done once a month. When the computer starts, hold down the "shift" key to turn off all system function extensions. When the computer starts, hold down the mouse to eject the floppy disk to avoid using it as a startup disk.

4. You can click the mouse on the top menu bar to switch, or you can set the uppercase and lowercase keys on the keyboard to switch. Here is a brief demonstration of the operation steps. Computer: MacBook Air System: macOS12 Method 1: First, we turn on the computer and click the input method icon on the top menu bar, as shown in the figure.

5. Keyboard recognition Insert the USB of the PC keyboard into the USB port of the Apple computer. The keyboard setting assistant will pop up in the general interface. Click to continue, which requires pressing the key on the right side of the left shift (usually "z"). If the interface does not respond, please click on the page and press the key again.

6. It can also work with other keys. For example, to enter the @ for an email, just press Shift 2 in English. Ctrl key: control key. English is the abbreviation of Control, and Chinese means control. It needs to be used with other keys or mouse. For example, we can use the mouse to select multiple non-contiguous objects.

How to switch input methods on Apple computers

Method: Press the "control space bar" on the computer keyboard at the same time to bring up the input method list; in the input method list, click the mouse to select the one you want to switch input method.

Switching the input method on an Apple computer is very simple, just press the shortcut key. In the menu bar of your Apple computer, find "System Preferences" and click to enter. In the System Preferences window, click Keyboard. In the Keyboard settings window, click the Input Sources tab.

If the language preference settings on the Mac computer have not been changed, the keys to switch the input method are the command key and the space bar. If you want to change this shortcut setting, you can click the input method icon on the menu to open Language & Text preferences.

If you only have two input methods, one English input method and one Chinese input method, then we can use keyboard shortcuts to switch. Press the command key, then press the space bar, and it will be in Switched between these two input methods.

Conclusion: The above is a summary of related content and answers compiled by this site for you on how to use the Apple Mac keyboard. I hope it will be helpful to you! If your problem is solved, please share it with more friends who care about this problem~

The above is the detailed content of How to Properly Use an Apple Mac Keyboard. For more information, please follow other related articles on the PHP Chinese website!